This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Comparison of Particulate Size Distributions from Advanced and Conventional Combustion - Part I: CDC, HCCI, and RCCI

Journal Article
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 01, 2014 by SAE International in United States
Comparison of Particulate Size Distributions from Advanced and Conventional Combustion - Part I: CDC, HCCI, and RCCI
Citation: Zhang, Y., Ghandhi, J., and Rothamer, D., "Comparison of Particulate Size Distributions from Advanced and Conventional Combustion - Part I: CDC, HCCI, and RCCI," SAE Int. J. Engines 7(2):820-834, 2014,
Language: English


  1. Kittelson, D., “Engine and Nanoparticles: a Review”, Journal of Aerosol Science, Vol. 29, No. 5/6, pp. 575-588, 1998
  2. Araujo, A., Barajas, B., Kleinman, M., Wang, X. et al., “Ambient particulate pollutants in the ultrafine range promote early atherosclerosis and systemic oxidative stress”, Circulation Research, Vol. 102, pp. 589-596, 2008
  3. Peters, A., Erich Wichmann, H., Tuch, T., Heinrich, J. et al., “Respiratory Effects Are Associated with the Number of Ultrafine Particles”, American Journal of Respiratory and Critical Care Medicine, Vol. 155, No. 4, pp. 1376-1383, 1997
  4. Benbrahim-Tallaa, L., Baan, R., Grosse, Y., Lauby-Secretan, B. et al., “Carcinogenicity of diesel-engine and gasoline-engine exhausts and some nitroarenes.” The Lancet Oncology no. 13 (7), pp. 663-664, 2012
  5. UN, “Regulation No. 83, Uniform provisions concerning the approval of vehicles with regard to the emission of pollutants according to engine fuel requirements.”, 2010
  6. Abdul-Khalek, I., Kittelson, D., Graskow, B., Wei, Q. et al., “Diesel Exhaust Particle Size: Measurement Issues and Trends,” SAE Technical Paper 980525, 1998, doi:10.4271/980525.
  7. Shi, J., Harrison, R., Brear, F., “Particle size distribution from a modern heavy duty diesel engine”, The Science of the Total Environment, 235, pp. 305-317, 1999
  8. Abdul-Khalek, I., Kittelson, D., and Brear, F., “The Influence of Dilution Conditions on Diesel Exhaust Particle Size Distribution Measurements,” SAE Technical Paper 1999-01-1142, 1999, doi:10.4271/1999-01-1142.
  9. Abdul-Khalek, I. and Kittelson, D., “Real Time Measurement of Volatile and Solid Exhaust Particles Using a Catalytic Stripper,” SAE Technical Paper 950236, 1995, doi:10.4271/950236.
  10. Abdul-Khalek, I., Kittelson, D., and Brear, F., “Diesel Trap Performance: Particle Size Measurements and Trends,” SAE Technical Paper 982599, 1998, doi:10.4271/982599.
  11. Najt, P. and Foster, D., “Compression-Ignited Homogeneous Charge Combustion,” SAE Technical Paper 830264, 1983, doi:10.4271/830264.
  12. Aceves, S., Flowers, D., Martinez-Frias, J., Smith, J. et al., “HCCI Combustion: Analysis and Experiments”, Society of Automotive Engineers Government/Industry Meeting, 2001
  13. Juttu, S., Thipse, S., Marathe, N., and Gajendra Babu, M., “Homogeneous Charge Compression Ignition (HCCI): A New Concept for Near Zero NOx and Particulate Matter (PM) from Diesel Engine Combustion,” SAE Technical Paper 2007-26-020, 2007, doi:10.4271/2007-26-020.
  14. Kokjohn, S., Hanson, R., Splitter, D., and Reitz, R., “Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel Blending,” SAE Int. J. Engines 2(2):24-39, 2009, doi:10.4271/2009-01-2647.
  15. Kokjohn, S., Hanson, R., Splitter, D., Reitz, R., “Fuel reactivity controlled compression ignition (RCCI): a pathway to controlled high-efficiency clean combustion.” International Journal of Engine Research 12.3, pp. 209-226, 2011
  16. Kokjohn, S., Hanson, R., Splitter, D., Kaddatz, J. et al., “Fuel Reactivity Controlled Compression Ignition (RCCI) Combustion in Light- and Heavy-Duty Engines,” SAE Int. J. Engines 4(1):360-374, 2011, doi:10.4271/2011-01-0357.
  17. Kaiser, E., Yang, J., Culp, T., Xu, N., Maricq, M., “Homogeneous charge compression ignition engine-out emission - does flame propagation occur in homogeneous charge compression ignition?”, International Journal of Engine Research, vol. 3 no. 4 pp. 185-195, 2002
  18. Agarwal, A., Singh, A., Lukose, A., Gupta, T., “Characterization of exhaust particulates from diesel fueled homogenous charge compression ignition combustion engine”, Journal of Aerosol Science, vol. 58, pp. 71-85, 2013
  19. Prikhodko, V., Curran, S., Barone, T., Lewis, S. et al., “Emission Characteristics of a Diesel Engine Operating with In-Cylinder Gasoline and Diesel Fuel Blending,” SAE Int. J. Fuels Lubr. 3(2):946-955, 2010, doi:10.4271/2010-01-2266.
  20. Kolodziej, C., Wissink, M., Splitter, D., Hanson, R. et al., “Particle Size and Number Emissions from RCCI with Direct Injections of Two Fuels,” SAE Technical Paper 2013-01-1661, 2013, doi:10.4271/2013-01-1661.
  21. Lüders, H., Krüger, M., Stommel, P., and Lüers, B., “The Role of Sampling Conditions in Particle Size Distribution Measurements,” SAE Technical Paper 981374, 1998, doi:10.4271/981374.
  22. Jung, H., Kittelson, D., and Zachariah, M., “The Influence of Engine Lubricating Oil on Diesel Nanoparticle Emissions and Kinetics of Oxidation,” SAE Technical Paper 2003-01-3179, 2003, doi:10.4271/2003-01-3179.
  23. Swanson, J., Kittelson, D., “Evaluation of thermal denuder and catalytic stripper methods for solid particle measurements”, Journal of Aerosol Science, Vol. 41, pp. 1113-1122, 2010
  24. Hanson, R., Curran, S., Wagner, R., Kokjohn, S. et al., “Piston Bowl Optimization for RCCI Combustion in a Light-Duty Multi-Cylinder Engine,” SAE Int. J. Engines 5(2):286-299, 2012, doi:10.4271/2012-01-0380.
  25. Dempsey, A., Walker, N. R., Gingrich, E., Reitz, R., “Comparison of Low Temperature Combustion Strategies for Advanced Compression Ignition Engines with a Focus on Controllability”, Combustion Science and Technology, 2013
  26. “Manual of HI-RES Series 6100 Micro Diluter”, Rupprecht & Patashnick Co., Inc., 2005
  27. Bagley, S., Gratz, L., Johnson, J., McDonald, J., “Effects of an Oxidation Catalytic Converter and a Biodiesel Fuel on the Chemical, Mutagenic, and Particle Size Characteristics of Emissions from a Diesel Engine”, Environmental Science & Technology, 32 (9), pp. 1183-1191, 1998
  28. Lehtoranta, K., Matilainen, P., Åsenbrygg, J., Lievonen, A. et al., “Particle oxidation catalyst in light duty and heavy duty diesel applications,” SAE Technical Paper 2007-24-0093, 2007, doi:10.4271/2007-24-0093.
  29. Harris, S., Maricq, M., “Signature size distributions for diesel and gasoline engine exhaust particulate matter”, Journal of Aerosol Science, Vol. 32, pp. 749-764, 2001
  30. Friedlander, S. K., Wang, C. S., “The self-preserving particle size distribution for coagulation by Brownian motion.” Journal of Colloid and interface Science 22.2, pp. 126-132, 1966
  31. Yokota, H., Kudo, Y., Nakajima, H., Kakegawa, T. et al., “A New Concept for Low Emission Diesel Combustion,” SAE Technical Paper 970891, 1997, doi:10.4271/970891.
  32. Neely, G., Sasaki, S., Huang, Y., Leet, J. et al., “New Diesel Emission Control Strategy to Meet US Tier 2 Emissions Regulations,” SAE Technical Paper 2005-01-1091, 2005, doi:10.4271/2005-01-1091.
  33. Konstandopoulos, A., Kostoglou, M., Skaperdas, E., Papaioannou, E. et al., “Fundamental Studies of Diesel Particulate Filters: Transient Loading, Regeneration and Aging,” SAE Technical Paper 2000-01-1016, 2000, doi:10.4271/2000-01-1016.
  34. “AVL 415S Variable Sampling Smoke Meter Operating Manual”, AVL, 2005
  35. Allen E., Smith P., Henshaw J., “A Review of Particles Agglomeration”, US Department of Energy.

Cited By