This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Use of an Innovative Predictive Heat Release Model Combined to a 1D Fluid-Dynamic Model for the Simulation of a Heavy Duty Diesel Engine

Journal Article
2013-24-0012
ISSN: 1946-3936, e-ISSN: 1946-3944
Published September 08, 2013 by SAE International in United States
Use of an Innovative Predictive Heat Release Model Combined to a 1D Fluid-Dynamic Model for the Simulation of a Heavy Duty Diesel Engine
Citation: Baratta, M., Finesso, R., Kheshtinejad, H., Misul, D. et al., "Use of an Innovative Predictive Heat Release Model Combined to a 1D Fluid-Dynamic Model for the Simulation of a Heavy Duty Diesel Engine," SAE Int. J. Engines 6(3):1566-1579, 2013, https://doi.org/10.4271/2013-24-0012.
Language: English

References

  1. Baratta , M. , Spessa , E. Numerical simulation techniques for the prediction of fluid-dynamics, combustion and performance in IC engines fuelled By CNG Computational simulations and applications Zhu J. InTech Rijeka 259 286 9789533074306 2011
  2. Baratta , M. , and Spessa , E. Turbocharged CNG Engines for Urban Transportation: Evaluation of Turbolag Reduction Strategies by means of Computational Analyses ASME Paper No. ICES2009-76067, 2009 Spring Technical Conference of the ASME ICED Milwaukee, Wisconsin, USA May 3 6 2009
  3. Baratta , M. , Spessa , E. , and Mairone , P. Numerical Investigation of Turbolag Reduction In HD CNG Engines By Means Of Exhaust Valve Variable Actuation and Spark Timing Control KSAE International Journal of Automotive Technology 11 3 289 306 2010
  4. Westin , F. and Ångström , H. Simulation of a Turbocharged SI-Engine with Two Software and Comparison with Measured Data SAE Technical Paper 2003-01-3124 2003 10.4271/2003-01-3124
  5. Badami , M. , Millo , F. , and Giaffreda , G. Experimental and Computational Analysis of a High Performance Four-Stroke Motorcycle Engine Equipped with a Variable Geometry Exhaust System SAE Technical Paper 2002-01-0001 2002 10.4271/2002-01-0001
  6. Galindo , J. , Luján , J.M. , Serrano , J.R. , Dolz , V. , and Guilain , S. Design of an Exhaust Manifold To Improve Transient Performance of a High-Speed Turbocharged Diesel Engine Experimental Thermal and Fluid Science 28 863 875 2004
  7. Vítek , O. , Macek , J. , and Polášek , M. New Approach to Turbocharger Optimization using 1-D Simulation Tools SAE Technical Paper 2006-01-0438 2006 10.4271/2006-01-0438
  8. Gamma Technologies Inc. GT-SUITE Engine Performance Application Manual 2009
  9. Catania , A.E. , Finesso , R. , Spessa , E. Predictive Zero-Dimensional Combustion Model for DI Diesel Engine Feed-Forward Control Energy Conversion and Management 52 10 September 2011 3159 3175 2011 Elsevier 0196-8904 http://dx.doi.org/10.1016/j.enconman.2011.05.003
  10. Catania , A. , Finesso , R. , Spessa , E. , Catanese , A. et al. Combustion Prediction by a Low-Throughput Model in Modern Diesel Engines SAE Int. J. Engines 4 1 2106 2123 2011 10.4271/2011-01-1410
  11. Catania A.E. , Finesso R. , Spessa E. Assessment of a Low-Throughput Predictive Model for Indicated Cycle, Combustion Noise and NO x Calculation in Diesel Engines in Steady-State and Transient Operations ICES2012-81094, Proceedings of the ASME 2012 Internal Combustion Engine Division Spring Technical Conference, ICES2012 May 6 9 2012 Torino, Piemonte, Italy
  12. Chmela , F. and Orthaber , G. Rate of Heat Release Prediction for Direct Injection Diesel Engines Based on Purely Mixing Controlled Combustion SAE Technical Paper 1999-01-0186 1999 10.4271/1999-01-0186
  13. Egnell , R. A Simple Approach to Studying the Relation between Fuel Rate Heat Release Rate and NO Formation in Diesel Engines SAE Technical Paper 1999-01-3548 1999 10.4271/1999-01-3548
  14. Ericson , C. , Westerberg , B. , Andersson , M. , and Egnell , R. Modelling Diesel Engine Combustion and NOx Formation for Model Based Control and Simulation of Engine and Exhaust Aftertreatment Systems SAE Technical Paper 2006-01-0687 2006 10.4271/2006-01-0687
  15. Ryan , T. and Callahan , T. Homogeneous Charge Compression Ignition of Diesel Fuel SAE Technical Paper 961160 1996 10.4271/961160
  16. Kong , S. , Han , Z. , and Reitz , R. The Development and Application of a Diesel Ignition and Combustion Model for Multidimensional Engine Simulation SAE Technical Paper 950278 1995 10.4271/950278
  17. Heywood , J.B. Internal Combustion Engine Fundamentals McGraw-Hill Intern. Editions 1988
  18. Finesso , R. and Spessa , E. Analysis of Combustion and Emissions in a EURO V Diesel Engine by Means of a Refined Quasi-Dimensional Multizone Diagnostic Model SAE Int. J. Engines 5 3 886 908 2012 10.4271/2012-01-1066

Cited By