Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

The Influence of In-Cylinder Flows on Emissions and Heat Transfer from Methane-Diesel Dual Fuel Combustion

Journal Article
2013-01-2509
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2013-01-2509
Published October 14, 2013 by SAE International in United States
The Influence of In-Cylinder Flows on Emissions and Heat Transfer from Methane-Diesel Dual Fuel Combustion
Sector:
Citation: Königsson, F., Dembinski, H., and Angstrom, H., "The Influence of In-Cylinder Flows on Emissions and Heat Transfer from Methane-Diesel Dual Fuel Combustion," SAE Int. J. Engines 6(4):1877-1887, 2013, https://doi.org/10.4271/2013-01-2509.
Language: English

References

  1. Karim , G. , Liu , Z. , and Jones , W. Exhaust Emissions from Dual Fuel Engines at Light Load SAE Technical Paper 932822 1993 10.4271/932822
  2. Guliaeff , A. , Wanninger , K. , Klose , F. , Maletz , G. et al. Development of a Sulfur Tolerant PGM Based Zeolite Catalyst for Methane Oxidation and Low Temperature Hydrocarbon Trapping SAE Technical Paper 2013-01-0531 2013 10.4271/2013-01-0531
  3. Königsson , F. , Stalhammar , P. , and Angstrom , H. Characterization and Potential of Dual Fuel Combustion in a Modern Diesel Engine SAE Technical Paper 2011-01-2223 2011 10.4271/2011-01-2223
  4. Dembinski , H. and Ångström , H. An Experimental Study of the Influence of Variable In-Cylinder Flow, Caused by Active Valve Train, on Combustion and Emissions in a Diesel Engine at Low Lambda Operation SAE Technical Paper 2011-01-1830 2011 10.4271/2011-01-1830
  5. Wheeler , J. , Polovina , D. , Ramanathan , S. , Roth , K. et al. Increasing EGR Tolerance using High Tumble in a Modern GTDI Engine for Improved Low-Speed Performance SAE Technical Paper 2013-01-1123 2013 10.4271/2013-01-1123
  6. Amer , A. and Reddy , T. Multidimensional Optimization of In-Cylinder Tumble Motion for the New Chrysler Hemi SAE Technical Paper 2002-01-1732 2002 10.4271/2002-01-1732
  7. Bergin , M. , Reitz , R. , Oh , S. , Miles , P. et al. Fuel Injection and Mean Swirl Effects on Combustion and Soot Formation in Heavy Duty Diesel Engines SAE Technical Paper 2007-01-0912 2007 10.4271/2007-01-0912
  8. Dembinski , H. and Angstrom , H. Swirl and Injection Pressure Impact on After-Oxidation in Diesel Combustion, Examined with Simultaneous Combustion Image Velocimetry and Two Colour Optical Method SAE Technical Paper 2013-01-0913 2013 10.4271/2013-01-0913
  9. Antila , E. , Imperato , M. , Kaario , O. , and Larmi , M. Effect of Intake Channel Design to Cylinder Charge and Initial Swirl SAE Technical Paper 2010-01-0624 2010 10.4271/2010-01-0624
  10. 2013 Lotus Cars http://www.lotuscars.com/engineering/en/avt-standard-package
  11. Schwoerer , J. , Kumar , K. , Ruggiero , B. , and Swanbon , B. Lost-Motion VVA Systems for Enabling Next Generation Diesel Engine Efficiency and After-Treatment Optimization SAE Technical Paper 2010-01-1189 2010 10.4271/2010-01-1189
  12. Deng , J. and Stobart , R. BSFC Investigation Using Variable Valve Timing in a Heavy Duty Diesel Engine SAE Technical Paper 2009-01-1525 2009 10.4271/2009-01-1525
  13. Thien G. Entwicklungsarbeiten an Ventilkanälen von Viertakt-Dieselmotoren ÖIZ 9 1965
  14. Morel , T. , Rackmil , C. , Keribar , R. , and Jennings , M. Model for Heat Transfer and Combustion In Spark Ignited Engines and its Comparison with Experiments SAE Technical Paper 880198 1988 10.4271/880198
  15. Uzkan , T. , Borgnakke , C. , and Morel , T. Characterization of Flow Produced by a High-Swirl Inlet Port SAE Technical Paper 830266 1983 10.4271/830266
  16. Morel , T. and Keribar , R. A Model for Predicting Spatially and Time Resolved Convective Heat Transfer in Bowl-in-Piston Combustion Chambers SAE Technical Paper 850204 1985 10.4271/850204
  17. Königsson , F. , Kuyper , J. , Stalhammar , P. , and Angstrom , H. The Influence of Crevices on Hydrocarbon Emissions from a Diesel-Methane Dual Fuel Engine SAE Int. J. Engines 6 2 751 765 2013 10.4271/2013-01-0848
  18. Min , K. , Cheng , W. , and Heywood , J. The Effects of Crevices on the Engine-Out Hydrocarbon Emissions in SI Engines SAE Technical Paper 940306 1994 10.4271/940306

Cited By

Recommended Content

Technical Paper Enlarging the Operational Range of a Gasoline HCCI Engine By Controlling the Coolant Temperature
Technical Paper Intake and Exhaust Ports Design for Tumble and Mass Flow Rate Improvements in Gasoline Engine
Journal Article A New Model to Describe the Heat Transfer in HCCI Gasoline Engines