Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Future Engine Technology in Hand-Held Power Tools

Journal Article
2012-32-0111
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2012-32-0111
Published October 23, 2012 by SAE International in United States
Future Engine Technology in Hand-Held Power Tools
Sector:
Citation: Trattner, A., Schmidt, S., Kirchberger, R., Eichlseder, H. et al., "Future Engine Technology in Hand-Held Power Tools," SAE Int. J. Engines 5(4):1912-1929, 2012, https://doi.org/10.4271/2012-32-0111.
Language: English

References

  1. Blair, G.P. “Design and Simulation of Two-Stroke Engines,” Society of Automotive Engineers, Inc. Warrendale, PA 978-1-56091-685-7 1996
  2. EPA 2002 “Control of Emission from non-road spark-ignition engines (EPA Phase II regulation)” July 1 2002
  3. Lanchester, F.W. Pearsall, R.H. “An Investigation into Certain Aspects of the Two-Stroke Engine for Automobile Vehicles” The Automobile Engineer London February 1922
  4. Gegg, T. Dangelmaier, M. Gorenflo, E. Kölmel, A. Möser, Ch. Low-Emission and Cost-Effective Two-Stroke SI Engines for Handheld Power Tools 11 th Stuttgart International Symposium / Automotive and Engine Technology Stuttgart 2011
  5. “Die Einspritzung von Leichtkraftstoffen in Flugmotoren” ATZ 47 1944 3-4 57 58 Germany 1944
  6. Scherenberg, H. “25 Jahre Benzindirekteinspritzung in Deutschland” MTZ 1955 245 254 Germany 1955
  7. Ricardo, H.R. “The High Speed Internal Combustion Engine” Blackie and Son Ltd. London, Great Britain 1953
  8. Groth Kl. “Das Betriebsverhalten des schnelllaufenden Zweitakt-Ottomotors mit Einspritzung und seine Entwicklungsmöglichkeiten” Technische Hochschule Hannover VDI Verlag Düsseldorf Heft 125 Germany 1959
  9. Herzog, M. Keck, U. Machens, K. Moeser, C. et al. “Low-Noise Leaf Blower with Low-Emission Stratified Engine,” SAE Technical Paper 2008-32-0035 2008 10.4271/2008-32-0035
  10. Schmidt, S. Winkler, F. Schoegl, O. Pontoppidan, M. “Development of a Combustion Process for a High Performance 2-Stroke Engine with High Pressure Direct Injection,” SAE Technical Paper 2004-01-2942 2004 10.4271/2004-01-2942
  11. Pontoppidan, M. Gaviani, G. Bella, G. De Maio, A. “Optimization by CFD Simulation of Spray Formation Parameters to Adapt Direct Injection High-Pressure Fuel Injectors to High-Speed SI-Engines,” SAE Technical Paper 2004-01-0539 2004 10.4271/2004-01-0539
  12. Winkler, F. Kirchberger, R. Schoegl, O. Schmidt, S. “Strategies to Reduce Scavenge Losses of Small Capacity 2-Stroke Engines, Pressurized by the Common Market Costs,” SAE Technical Paper 2005-32-0098 2005
  13. Schmidt, S. Eichlseder, H. Kirchberger, R. Nimmervoll, P. et al. “GDI with High-Performance 2-Stroke Application: Concepts, Experiences and Potential for the Future,” SAE Technical Paper 2004-32-0043 2004 10.4271/2004-32-0043
  14. Musu, E. Frigo, S. De Angelis, F. Gentili, R. et al. “Evolution of a Small Two-Stroke Engine with Direct Liquid Injection and Stratified Charge,” SAE Technical Paper 2006-32-0066 2006 10.4271/2006-32-0066
  15. Laimbock, F. Landerl, C. “50cc Two-Stroke Engines for Mopeds, Chainsaws and Motorcycles with Catalysts,” SAE Technical Paper 901598 1990 10.4271/901598
  16. Davenport, M. Duke, R. Bingham, J. Kemmerer, D. et al. “Low-Pressure In-Cylinder Fuel Injection,” SAE Technical Paper 2003-32-0082 2003 10.4271/2003-32-0082
  17. Holzleitner, J. Ohrnberger, G. “Engine Concepts for Snowmobiles,” SAE Technical Paper 2004-32-0090 2004 10.4271/2004-32-0090
  18. Gegg, T. Analyse und Optimierung der Gemischbildung und Abgasemissionen kleinvolumiger Zweitakt-Ottomotoren Dissertation - Ph.D.thesis 978-3-8325-1723-6 Germany 2006
  19. Winkler, F. Oswald, R. Schögl, O. Kirchberger, R. et al. “Application of Low Pressure Direct Injection and Semi-Direct Injection to a Small Capacity Two-Stroke Engine,” SAE Technical Paper 2008-32-0059 2008 10.4271/2008-32-0059
  20. Sogawa, M. Kato, M. “Development of the High Pressure Direct Injection (HPDI) System for Two-Stroke Outboard Motor,” SAE Technical Paper 2001-01-1786 2001 10.4271/2001-01-1786
  21. Oswald, R. Ebner, A. Kirchberger, R. “High Efficient 125-250 cm3 LPDI Two-Stroke Engines, a Cheap and Robust Alternative to Four-Stroke Solutions?,” SAE Technical Paper 2010-32-0019 2010 10.4271/2010-32-0019
  22. Blair, G.P. Kee, R. Carson, C. Douglas, R. “The Reduction of Emissions and Fuel Consumption by Direct Air-Assisted Fuel Injection into a Two-Stroke Engine” 4 th Graz Two-Wheeler Symposium Graz Technical University of Technology 1991
  23. Leighton, S. Ahern, St. “The Orbital Small Engine Fuel Injection System (SEFIS) for Direct Injected Two Stroke Cycle Engines” 5 th Graz Two-Wheeler Symposium Graz Technical University of Technology 1993
  24. Duret, P. Monnier, G. “Low Emissions IAPAC Fuel-Injected 2-Stroke Engines for 2 Wheelers” 5 th Graz Two-Wheeler Symposium Graz Technical University of Technology 1993
  25. Ambler, M. Zocchi, A. “Development of the Aprilia DITECH 50 engine.,” SAE Technical Paper 2001-01-1781 2001 10.4271/2001-01-1781
  26. Gambino, M. Iannaccone, S. “Two stroke direct injection spark ignition engine for two wheelers,” SAE Technical Paper 2001-01-1842 2001 10.4271/2001-01-1842
  27. Schmidt, S. Joyce, M. Wall, J. Trattner, A. et al. “Investigations on Low Pressure Gasoline Direct Injection for a Standard GDI Combustion System,” SAE Technical Paper 2010-32-0094 2010 10.4271/2010-32-0094
  28. Hehnke, M. Naegele, C. Leufen, H. Bähner, A. “Intelligent Engine Management System for Small Handheld Low Emission Engines,” SAE Technical Paper 2009-32-0019 2009

Cited By

Recommended Content

Technical Paper Influence of the Alcohol Type and Concentration in Alcohol-Blended Fuels on the Combustion and Emission of Small Two-Stroke SI Engines
Technical Paper Multi-Layer Stratified (MuLS) Two-Stroke Engine
Technical Paper Influence of Ethanol and 2-Butanol Blended Fuels on Combustion and Emissions in a Small Displacement Two Stroke Engine