Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

A Gasoline Fueled Pre-Chamber Jet Ignition Combustion System at Unthrottled Conditions

Journal Article
2012-01-0386
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2012-01-0386
Published April 16, 2012 by SAE International in United States
A Gasoline Fueled Pre-Chamber Jet Ignition Combustion System at Unthrottled Conditions
Sector:
Citation: Attard, W. and Blaxill, H., "A Gasoline Fueled Pre-Chamber Jet Ignition Combustion System at Unthrottled Conditions," SAE Int. J. Engines 5(2):315-329, 2012, https://doi.org/10.4271/2012-01-0386.
Language: English

References

  1. Attard, W. Bassett, M. Parsons, P. Blaxill, H. “A New Combustion System Achieving High Drive Cycle Fuel Economy Improvements in a Modern Vehicle Powertrain,” SAE Technical Paper 2011-01-0664 2011 10.4271/2011-01-0664
  2. Attard, W. Blaxill, H. “A Single Fuel Pre-Chamber Jet Ignition Powertrain Achieving High Load, High Efficiency and Near Zero NOx Emissions,” SAE Technical Paper 2011-01-2023 2011 10.4271/2011-01-2023
  3. Attard, W. Blaxill, H. “A Lean Burn Gasoline Fueled Pre-Chamber Jet Ignition Combustion System Achieving High Efficiency and Low NOx at Part Load,” SAE Technical Paper 2012-01-1146 2012 10.4271/2012-01-1146
  4. Attard, W. Blaxill, H. Anderson, E. Litke, P. “Knock Limit Extension with a Gasoline Fueled Pre-Chamber Jet Igniter in a Modern Vehicle Powertrain,” SAE Technical Paper 2012-01-1143 2012 10.4271/2012-01-1143
  5. Attard, W. Kohn, J. Parsons, P. “Ignition Energy Development for a Spark Initiated Combustion System Capable of High Load, High Efficiency and Near Zero NOx Emissions,” SAE Int. J. Engines 3 2 481 496 2010 10.4271/2010-32-0088
  6. Attard, W. Parsons, P. “A Normally Aspirated Spark Initiated Combustion System Capable of High Load, High Efficiency and Near Zero NOx Emissions in a Modern Vehicle Powertrain,” SAE Int. J. Engines 3 2 269 287 2010 10.4271/2010-01-2196
  7. Attard, W. Parsons, P. “Flame Kernel Development for a Spark Initiated Pre-Chamber Combustion System Capable of High Load, High Efficiency and Near Zero NOx Emissions,” SAE Int. J. Engines 3 2 408 427 2010 10.4271/2010-01-2260
  8. Attard, W. Fraser, N. Parsons, P. Toulson, E. “A Turbulent Jet Ignition Pre-Chamber Combustion System for Large Fuel Economy Improvements in a Modern Vehicle Powertrain,” SAE Int. J. Engines 3 2 20 37 2010 10.4271/2010-01-1457
  9. Attard, W. Toulson, E. Huisjen, A. Chen, X. et al. “Spark Ignition and Pre-Chamber Turbulent Jet Ignition Combustion Visualization,” SAE Technical Paper 2012-01-0823 2012 10.4271/2012-01-0823
  10. Toulson, E. Watson, H. Attard, W. “The Lean Limit and Emissions at Near-Idle for a Gasoline HAJI System with Alternative Pre-Chamber Fuels,” SAE Technical Paper 2007-24-0120 2007 10.4271/2007-24-0120
  11. Toulson, E. Watson, H. Attard, W. “Gas Assisted Jet Ignition of Ultra-Lean LPG in a Spark Ignition Engine,” SAE Technical Paper 2009-01-0506 2009 10.4271/2009-01-0506
  12. Toulson, E. Schock, H. Attard, W. “A Review of Pre-Chamber Initiated Jet Ignition Combustion Systems,” SAE Technical Paper 2010-01-2263 2010 10.4271/2010-01-2263
  13. Kyaw, Z.H. Watson, H.C. Hydrogen Assisted Jet Ignition for Near Elimination of NOx and Cyclic Variability in the S.I. Engine Twenty-Fourth Symposium on Combustion 1992 24 1 1449 1455
  14. Glasson, N. Lumsden, G. Dingli, R. Watson, H. “Development of the HAJI System for a Multi-Cylinder Spark Ignition Engine,” SAE Technical Paper 961104 1996 10.4271/961104
  15. Dober, G.G. Watson, H.W. Modelling the Flame Enhancement of a HAJI Equipped Spark Ignition Engine IPC-10 Proceedings 1999
  16. Lawrence, J. Watson, H. “Hydrocarbon Emissions from a HAJI Equipped Ultra-lean Burn SI Engine,” SAE Technical Paper 980044 1998 10.4271/980044
  17. Hamori, F. Watson, H.C. Hydrogen Assisted Jet Ignition for the Hydrogen Fuelled SI Engine World Hydrogen Energy Conference 2006 Lyon, France
  18. Toulson, E. Applying Alternative Fuels in Place of Hydrogen to the Jet Ignition Process Thesis (Ph.D.) Department of Mechanical and Manufacturing Engineering, University of Melbourne 2008
  19. Attard, W. Toulson, E. Hamori, F. Watson, H. “Combustion System Development and Analysis of a Carbureted and PFI Normally Aspirated Small Engine,” SAE Technical Paper 2010-32-0095 2010 10.4271/2010-32-0095
  20. Toulson, E. Watson, H. Attard, W. “Modeling Alternative Prechamber Fuels in Jet Assisted Ignition of Gasoline and LPG,” SAE Technical Paper 2009-01-0721 2009 10.4271/2009-01-0721
  21. Gussak, L.A. LAG-Process of Combustion and its Application in Automobile Engines IMechE C257/76 1976 137 145
  22. Wyczalek, F. Harned, J. Maksymiuk, S. Blevins, J. “EFI Prechamber Torch Ignition of Lean Mixtures,” SAE Technical Paper 750351 1975 10.4271/750351
  23. Cairns, A. Blaxill, H. Irlam, G. “Exhaust Gas Recirculation for Improved Part and Full Load Fuel Economy in a Turbocharged Gasoline Engine,” SAE Technical Paper 2006-01-0047 2006 10.4271/2006-01-0047
  24. Alger, T. Chauvet, T. Dimitrova, Z. “Synergies between High EGR Operation and GDI Systems,” SAE Int. J. Engines 1 1 101 114 2009 10.4271/2008-01-0134
  25. Lake, T. Stokes, J. Murphy, R. Osborne, R. et al. “Turbocharging Concepts for Downsized DI Gasoline Engines,” SAE Technical Paper 2004-01-0036 2004 10.4271/2004-01-0036

Cited By

Recommended Content

Technical Paper A Lean Burn Gasoline Fueled Pre-Chamber Jet Ignition Combustion System Achieving High Efficiency and Low NOx at Part Load
Journal Article Knock Limit Extension with a Gasoline Fueled Pre-Chamber Jet Igniter in a Modern Vehicle Powertrain
Technical Paper Spark Ignition and Pre-Chamber Turbulent Jet Ignition Combustion Visualization