Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

The 3Dcell Approach for the Acoustic Modeling of After-Treatment Devices

Journal Article
2011-24-0215
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2011-24-0215
Published September 11, 2011 by SAE International in United States
The 3Dcell Approach for the Acoustic Modeling of After-Treatment Devices
Sector:
Citation: Montenegro, G., Onorati, A., Della Torre, A., and Torregrosa, A., "The 3Dcell Approach for the Acoustic Modeling of After-Treatment Devices," SAE Int. J. Engines 4(2):2519-2530, 2011, https://doi.org/10.4271/2011-24-0215.
Language: English

References

  1. Biermayer, W. Brandl, F. “Vehicle Sound Engineering by Modifying Intake / Exhaust Orifice Noise Using Simulation Software,” SAE Technical Paper 2003-01-1686 2003 10.4271/2003-01-1686
  2. Massey, S. Williamson, P.S. Chuter, R.J. “Modelling Exhaust Systems Using One-Dimensional Methods,” SAE Technical Paper 2002-01-0005 2002 10.4271/2002-01-0005
  3. Wren, C.S. Johnson, O. “Gas Dynamics Simulation for the Design of Intake and Exhaust Systems - Latest Techniques,” SAE Technical Paper 951367 1995 10.4271/951367
  4. Riegler, U.G. Bargende, M. “Direct Coupled 1D/3D-CFD-Computation (GT-Power/Star-CD) of the Flow in the Switch-Over Intake System of an 8-Cylinder SI Engine with External Exhaust Gas Recirculation,” SAE Technical Paper 2002-01-0901 2002 10.4271/2002-01-0901
  5. Mehdizadeh, Omid Z. Paraschivoiu, Marius A three-dimensional finite element approach for predicting the transmission loss in mufflers and silencers with no mean flow Applied Acoustics 66 8 902 918 2005
  6. Yasuda, Takashi Wu, Chaoqun Nakagawa, Noritoshi Nagamura, Kazuteru Predictions and experimental studies of the tail pipe noise of an automotive muffler using a one dimensional cfd model Applied Acoustics 71 8 701 707 2010
  7. Montenegro, G. Torre, A. Della Onorati, A. Fairbrother, R. A General 3D Cell Method for the Acoustic Modelling of Perforates with Sound Absorbing Material for I.C. Engine Exhaust Systems 17th International Conference on Sound and Vibration - ICSV17, Cairo, Egypt 18-22 July 2010
  8. Weltens, H. Bressler, H. Krause, P. “Influence of Catalytic Converters on Acoustics of Exhaust Systems for European Cars,” SAE Technical Paper 910836 1991 10.4271/910836
  9. Selamet, A. Kothamasu, V. Novak, J. M. Kach, R. A. Experimental investigation of in-duct insertion loss of catalysts in internal combustion engines Applied Acoustics 60 4 451 487 2000
  10. Selamet, A. Yönak, S.H. Novak, J.M. Khan, M. “The Effect of Vehicle Exhaust System Components on Flow Losses and Noise in Firing Spark-Ignition Engines,” SAE Technical Paper 951260 1995 10.4271/951260
  11. Astley, R. J. Cummings, A. Wave propagation in catalytic converters: Formulation of the problem and finite element to solution scheme Journal of Sound and Vibration 188 5 635 657 1995
  12. Ih, J. G. Park, C. M. Kim, H. J. A model for sound propagation in capillary ducts with mean flow Journal of Sound and Vibration 190 2 163 175 1996
  13. Jeong, K. W. Ih, J. G. A numerical study on the propagation of sound through capillary tubes with mean flow Journal of Sound and Vibration 198 1 67 79 1996
  14. Dokumaci, E. On transmission of sound in a non-uniform duct carrying a subsonic compressible flow Journal of Sound and Vibration 210 3 391 401 1998
  15. Peat, K. S. Convected acoustic wave motion along a capillary duct with an axial temperature gradient Journal of Sound and Vibration 203 5 855 866 1997
  16. Peat, K. S. Kirby, R. Acoustic wave motion along a narrow cylindrical duct in the presence of an axial mean flow and temperature gradient Journal of the Acoustical Society of America 107 4 1858 1867 2000
  17. Arnott, W. Patrick Sabatier, James M. Raspet, Richard Sound propagation in capillary-tube-type porous media with small pores in the capillary walls The Journal of the Acoustical Society of America 90 6 3299 3306 1991
  18. Bernard, Miguel Velea, Doru Sabatier, James M. Permanent removal of the wall porosity in monolithic catalyst support ceramics The Journal of the Acoustical Society of America 99 4 2430 2432 1996
  19. Selamet, A. Easwaran, V. Novak, J.M. “Wave Propagation in Catalytic Converters: A Preliminary Investigation,” SAE Technical Paper 971873 1997 10.4271/971873
  20. Selamet, A. Easwaran, V. Novak, J. M. Kach, R. A. Wave attenuation in catalytic converters: Reactive versus dissipative effects The Journal of the Acoustical Society of America 103 2 935 943 1998
  21. Payri, F. Benajes, J. Galindo, J. “One-Dimensional Fluid-Dynamic Model for Catalytic Converters in Automotive Engines,” SAE Technical Paper 950785 1995 10.4271/950785
  22. Barris, M. “Development of Diesel Exhaust Catalytic Converter Mufflers,” SAE Technical Paper 920369 1992 10.4271/920369
  23. Norman, K. R. Selamet, A. Novak, J. M. Perforated muffler manifold catalyst Journal of Sound and Vibration 218 4 711 734 1998
  24. Montenegro, G. Piscaglia, F. Ferrari, G. Onorati, A. et al. “A 1D Unsteady Thermo-Fluid Dynamic Approach for the Simulation of the Hydrodynamics of Diesel Particulate Filters,” SAE Technical Paper 2006-01-0262 2006 10.4271/2006-01-0262
  25. Allam, Sabry Abom, Mats Acoustic modelling and testing of diesel particulate filters Journal of Sound and Vibration 288 1-2 255 273 2005
  26. Allam, Sabry Abom, Mats Sound propagation in an array of narrow porous channels with application to diesel particulate filters Journal of Sound and Vibration 291 3-5 882 901 2006
  27. Allam, Sabry Abom, Mats Modeling and testing of after-treatment devices Journal of Vibration and Acoustics 128 3 347 356 2006
  28. Katari, A. Syed, M. Sickels, M. Wahl, T. et al. “Effect of Aspect Ratio on Pressure Drop and Acoustics in Diesel Particulate Filters,” SAE Technical Paper 2004-01-0695 2004 10.4271/2004-01-0695
  29. Chapman, M. Novak, J. M. Stein, R. A. Numerical modeling of inlet and exhaust flows in multi-cylinder internal combustion engines ASME Winter Annual Meeting 1982
  30. Onorati, A. Numerical Simulation of Unsteady Flows in I.C. Engine Silencers and the Prediction of Tailpipe Noise Design Techniques for Engine Manifolds Winterbone, D. E. Pearson, R. J. London July 1999 Professional Engineering Publishing
  31. Winterbone, D. E. Pearson, R. J. Theory of Engine Manifold Design Professional Engineering Publishing London 2000
  32. Ferziger, J. H. Perić, M. Computational methods for fluid dynamics Springer 1997
  33. Versteeg, H. K. Malalasekera, W. An Introduction to Computational Fluid Dynamics: the Finite Volume Method Addison-Wesley Longman 1995
  34. Chapman, M. Flows in internal combustion engines The winter annual meeting of the American Society of Mechanical Engineers 1982
  35. Heck, R. M. Farrauto, R. J. Catalytic Air Pollution Control Wiley Inter-Science 2002
  36. Churchill, S. W. Friction-Factor Equation Spans all Fluid Flow Regimes Chem. Eng. 91 92 1977
  37. Konstandopoulos, A.G. Johnson, J.H. “Wall-Flow Diesel Particulate Filters-Their Pressure Drop and Collection Efficiency,” SAE Technical Paper 890405 1989 10.4271/890405
  38. Masoudi, M. “Hydrodynamics of Diesel Particulate Filters,” SAE Technical Paper 2002-01-1016 2002 10.4271/2002-01-1016
  39. Payri, F. Desantes, J. M. Broatch, A. Modified impulse method for the measurement of the frequency response of acoustic filters to weakly nonlinear transient excitations J. Acoust. Soc. Am. 107 731 738 2000
  40. Dickey, N.S. Selamet, A. Parks, S.J. Tallio, K.V. et al. “Acoustic Characteristics of Automotive Catalytic Converter Assemblies,” SAE Technical Paper 2004-01-1002 2004 10.4271/2004-01-1002
  41. Eriksson, L. J. Effect of inlet/outlet locations on higher order modes in silencers J. Acoust. Soc. Am. 72 4 1208 1211 1982
  42. Eriksson, L. J. Higher order mode effects in circular ducts and expansion chambers J. Acoust. Soc. Am. 68 2 545 550 1980

Cited By