Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Effects of Post-Injection Strategies on Near-Injector Over-Lean Mixtures and Unburned Hydrocarbon Emission in a Heavy-Duty Optical Diesel Engine

Journal Article
2011-01-1383
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2011-01-1383
Published April 12, 2011 by SAE International in United States
Effects of Post-Injection Strategies on Near-Injector Over-Lean Mixtures and Unburned Hydrocarbon Emission in a Heavy-Duty Optical Diesel Engine
Sector:
Citation: Chartier, C., Andersson, O., Johansson, B., Musculus, M. et al., "Effects of Post-Injection Strategies on Near-Injector Over-Lean Mixtures and Unburned Hydrocarbon Emission in a Heavy-Duty Optical Diesel Engine," SAE Int. J. Engines 4(1):1978-1992, 2011, https://doi.org/10.4271/2011-01-1383.
Language: English

References

  1. Kook, S. Bae, C. Miles, P.C. Choi, D. Pickett, L.M “The Influence of Charge Dilution and Injection Timing on Low-Temperature Diesel Combustion and Emissions,” SAE Technical Paper 2005-01-3837 2005 10.4271/2005-01-3837
  2. Dec, J.E. “A Conceptual Model of D.I. Diesel Combustion Based on Laser-Sheet Imaging,” SAE Technical Paper 970873 1997 10.4271/970873
  3. Musculus, M.P.B. Lachaux, T. Pickett, L.M. Idicheria, C.A. “End-of-Injection Over-Mixing and Unburned Hydrocarbon Emissions in Low-Temperature-Combustion Diesel Engines,” SAE Technical Paper 2007-01-0907 2007 10.4271/2007-01-0907
  4. Lachaux, T. Musculus, M.P.B. “In-cylinder Unburned Hydrocarbon Visualization during Low-Temperature Compression-Ignition Engine Combustion Using Formaldehyde PLIF,” Proc.Combustion.Inst. 2007
  5. Kim, D. Ekoto, I. Colban, W.F. Miles, P.C. “In-cylinder CO and UHC Imaging in a Light-Duty Engine Diesel Engine during PPCI Low-Temperature Combustion,” SAE Int. J. Fuels Lubr. 1 1 933 956 2008 10.4271/2008-01-1602
  6. Han, M. Assanis, D.N. Bohac, S.V. “Sources of Hydrocarbon Emissions from Low-Temperature Premixed Compression Ignition Combustion from a Common Rail Direct Injection Diesel Engine” Combustion Science and Technology 181 3 496 517 2009
  7. Genzale, C.L. Reitz, R.D. Musculus, M.P.B. “Effects of Jet-Bowl and Jet-Jet Interactions on Late-Injection Low-Temperature Heavy-Duty Diesel Combustion” Proceedings Thiesel 2008 2008
  8. Koci, C.P. Ra, Y. Krieger, R. Andrie, M. et al. “Detailed Unburned Hydrocarbon Investigations in a Highly-Dilute Diesel Low Temperature Combustion Regime,” SAE Int. J. Engines 2 1 858 879 2009 10.4271/2009-01-0928
  9. Collin, R. Nygren, J. Richter, M. Aldén, M. Hildingsson, L. Johansson, B. “Simultaneous OH- and Formaldehyde-LIF Measurements in an HCCI Engine,” SAE Technical Paper 2003-01-3218 2003 10.4271/2003-01-3218
  10. Singh, S. Musculus, M.P.B Reitz, R.D “Mixing and flame structures inferred from OH-PLIF for conventional and low-temperature diesel engine combustion,” Combustion and Flame 156 2009 1898 1908 2009
  11. Musculus, M.P.B. Dec, J.E. Tree, D.R. “Effects of Fuel Parameters and Diffusion Flame Lift- Off on Soot Formation in a Heavy-Duty Diesel Engine,” SAE Technical Paper 2002-01-0889 2002 10.4271/2002-01-0889
  12. Espey, C. Dec, J.E. “Diesel Engine Combustion Studies in a Newly Designed Optical Access Engine Using High-Speed Visualization and 2-D Laser Imaging,” SAE Technical Paper 930971 1993 10.4271/930971
  13. Ojeda, W. Zoldak, P. Espinosa, R. Kumar, R. “Development of a Fuel Injection Strategy for Partially Premixed Compression Ignition Combustion,” SAE Int. J. Engines 2 1 1473 1488 2009 10.4271/2009-01-1527
  14. Heywood, J. B. Internal Combustion Engine Fundamentals McGraw-Hill, Inc. 1988
  15. Bobba, M.K Chartier, C. Andersson, Ö. Johansson, B. Musculus, M.P.B “Planar Laser-Diagnostics of Soot and OH with Post-Injections in a Heavy-Duty LTC Diesel Engine” Proceedings Thiesel 2010 2010
  16. Musculus, M.P.B. “On the Correlation between NOx Emissions and the Diesel Premixed Burn,” SAE Technical Paper 2001-01-1401 2004 10.4271/2004-01-1401
  17. Klein-Douwel, R. J. H. Frijters, P. J. M. Seykens, X. L. J. Somers, L. M. T. Baert, R. S. G. “Gas Density and Rail Pressure Effects on Diesel Spray Growth from a Heavy-Duty Common Rail Injector,” Energy & Fuels 2009 23 1832 1842 2009
  18. Kohse-Höinghaus, K. “Laser techniques for the quantitative detection of reactive intermediates in combustion systems” Progress in Energy and Combustion Science 20 203 279 1994
  19. Genzale, C.L. Reitz, R.D. Musculus, M.P.B. “Effects of Piston Bowl Geometry on Mixture Development and Late- Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine,” SAE Int. J. Engines 1 1 913 937 2008 10.4271/2008-01-1330
  20. Aceves, S.A. Flowers, D.L. Espinosa-Loza, F. Martinez-Frias, J. Dibble, R.W. Christenson, M. Bengt, J. Hessel, R.P. “Piston-Liner Crevice Geometry Effect on HCCI Combustion by Multi-Zone Analysis,” SAE Technical Paper 2002-01-2869 2002 10.4271/2002-01-2869
  21. Greeves, G. Khan, I.M. Wang, C.H.T. Fenne, I. “Origins of Hydrocarbon Emissions from Diesel Engines,” SAE Technical Paper 770259 1977 10.4271/770259

Cited By

Recommended Content

Journal Article Optical Investigation of the Reduction of Unburned Hydrocarbons Using Close-Coupled Post Injections at LTC Conditions in a Heavy-Duty Diesel Engine
Technical Paper Optical Diagnostics of HCCI and Low-Temperature Diesel Using Simultaneous 2-D PLIF of OH and Formaldehyde
Technical Paper Optical Study on the Fuel Spray Characteristics of the Four-Consecutive-Injections Strategy Used in High-Pressure Isobaric Combustion