Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Characterization of the Near-Field Spray and Internal Flow of Single-Hole and Multi-Hole Sac Nozzles using Phase Contrast X-Ray Imaging and CFD

Journal Article
2011-01-0681
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2011-01-0681
Published April 12, 2011 by SAE International in United States
Characterization of the Near-Field Spray and Internal Flow of Single-Hole and Multi-Hole Sac Nozzles using Phase Contrast X-Ray Imaging and CFD
Sector:
Citation: Lai, M., Zheng, Y., Xie, X., Moon, S. et al., "Characterization of the Near-Field Spray and Internal Flow of Single-Hole and Multi-Hole Sac Nozzles using Phase Contrast X-Ray Imaging and CFD," SAE Int. J. Engines 4(1):703-719, 2011, https://doi.org/10.4271/2011-01-0681.
Language: English

References

  1. Bergstrand, P. Denbratt, I. “Diesel Combustion with Reduced Nozzle Orifice Diameter,” SAE Technical Paper 2001-01-2010 2001 10.4271/2001-01-2010
  2. Andriotis, A. Gavaises, M. Arcoumanis, C. 2008 “Vortex Flow and Cavitation in Diesel Injector Nozzles,” Journal of Fluid Mechanics 610 195 215
  3. Andriotis, A. Gavaises, M. 2009 “Influence of Vortex Flow and Cavitation on Near-Nozzle Diesel Spray Dispersion Angle,” Atomization and Sprays 19 247 261
  4. Qin, J. Dan, T. Lai, M-C. Savonen, C. Schwartz, E. Bryzik, W. “Correlating the Diesel Spray Behavior to Nozzle Design,” SAE Technical Paper 1999-01-3555 1999 10.4271/1999-01-3555
  5. Han, J-S. Lu, P-H. Lai, M-C. Henein, N. A. “Investigation of Diesel Spray Primary Break-up for Different Nozzle Geometries,” SAE Technical Paper 2002-01-2775 2002 10.4271/2002-01-2775
  6. Badock, C. Wirth, R. Fath, A. Leipertz, A. 1999 “Investigation of Cavitation in Real Size Diesel Injection Nozzles,” Int'l Journal of Heat and Fluid Flow 20 538 544
  7. Sou, A. Tomiyama, A. Hosokawa, S. Nigorikawa, S. Maeda, T. 2006 “Cavitation in a Two-Dimensional Nozzle and Liquid Jet Atomization,” JSME International Journal; Series B 49 1253 1259
  8. Lai, M-C. Wang, T-C. Xie, X. Han, J. Henein, N. A. Schwarz, E. Bryzik, W. “Microscopic Characterization of Diesel Sprays at VCO Nozzle Exit,” SAE Technical Paper 982542 1998 10.4271/982542
  9. Liu, Z. Im, K. Xie, X. Wang, Y. Fezzaa, K. Lai, M.-C. Wang, J. 2009 “Single-Shot Ultra-Fast Phase-Contrast X-ray Imaging of High-Pressure Diesel Fuel Sprays,” 11th International Conference on Liquid Atomization and Spray Systems (ICLASS 2009) Vail, Colorado August 2009
  10. Liu, Z. Im, K-S. Xie, X. Wang, Y. Fezzaa, K. Lai, M-C. Wang, J. “Near-Nozzle Structure of Diesel Sprays Affected by Internal Geometry of Injector Nozzle: Visualized by Single-Shot X-ray Imaging,” SAE Technical Paper 2010-01-0877 2010 10.4271/2010-01-0877
  11. Powell, C. F. Yue, Y. Poola, R. Wang, J. Lai, M-C. Schaller, J. “X-Ray Measurement of High Pressure Diesel Sprays SAE Technical Paper 2001-01-0531 2001 10.4271/2001-01-0531
  12. Wilkins, S. W. Gureyev, T. E. Gao, D. Pogany, A. Stevenson, A. W. 1996 “Phase-Contrast Imaging using Polychromatic Hard X-rays,” Letters to Nature 384 335 338 1996
  13. Giannadakis, E. Papoulias, D. Gavaises, M. Arcoumanis, C. et al. “Evaluation of the Predictive Capability of Diesel Nozzle Cavitation Models,” SAE Technical Paper 2007-01-0245 2007 10.4271/2007-01-0245
  14. Gavaises, M. Andriotis, A. Papoulias, D. Mitroglou, N. Theodorakakos, A. 2009 “Characterization of String Cavitation in Large-Scale Diesel Nozzles,” Physics of Fluids 21 052107
  15. Gembicky, M. Oss, D. Fuchsb, R. Coppensa, P. 2005 “A Fast Mechanical Shutter for Submicrosecond Time-Resolved Synchrotron Experiments,” Journal of Synchrotron Radiation 12 665 669
  16. Peterson, A. Lee, P-I. Lai, M-C. Wu, M-C. Dimaggio, C. “Impact Of Biodiesel Emission Products From A Multi-Cylinder Direct Injection Diesel Engine On Particulate Filter Performance,” SAE Technical Paper 2009-01-1184 2009 10.4271/2009-01-1184
  17. Mulemane, A. Subramaniyam, S. Lu, P-H. Han, J-S. Lai, M-C. Poola, R. “Comparing Cavitation in Diesel Injectors Based on Different Modeling Approaches,” SAE Technical Paper 2004-01-0027 2004 10.4271/2004-01-0027
  18. Lee, W. K. Fezzaa, K. Wang, J. 2005 “Metrology of Steel Micronozzles using X-ray Propagation-Based Phase-Enhanced Microimaging,” Applied Physics Letter 87 084105 2005
  19. Soteriou, C. Andrews, R. J. Torres, N. Smith, M. Kunkulagunta, R. 2001 “Through the Diesel Nozzle Hole - a Journey of Discovery,” Proc. ILASS Americas, 14th Annual Conference on Liquid Atomization and Spray Systems Dearborn, Michigan, US
  20. Kubitschek, J. P. Weidman, P. D. 2007 “Helical Instability of a Rotating Viscous Liquid Jet,” Physics of Fluids 19 114108
  21. Kubitschek, J. P. Weidman, P. D. 2008 “Helical Instability of a Rotating Liquid Jet,” Physics of Fluids 20 091104
  22. Menter, F.R. 1993 “Zonal Two Equation k-ω Turbulence Models for. Aerodynamic Flows,” AIAA Paper 93-2906
  23. Lesieur, M. Begou, P. Briand, E. Danet, A. Delcayre, F. Aider, J.L. “Coherent-vortex dynamics in large-eddy simulations of turbulence” Journal of turbulence 4 016 2003
  24. Dubief, Y. Delcayre, F. “On coherent vortex identification in turbulence” Journal of turbulence 1 011 2000
  25. Shi, J.-M. Wenzlawski, K. Helie, J. Nuglisch, H. Cousin, J. URANS & SAS analysis of Flow Dynamics in a GDI nozzle ILASS-Europe 2010, 23rd Annual Conference on Liquid Atomization and Spray Systems 2010 Brno 2010
  26. Miranda, R. Chaves, H. Obermeier, F. 2002 “Imaging of Cavitation, Hollow Jets and Jet Branching at Low Lift in a Real-size VCO Nozzle,” ILASS-Europe 2002 Zaragoza, Spain Sept. 9 11 2002
  27. Collicott, S. Li, H. “True-scale True-pressure Internal Flow Visualization for Diesel Injectors,” SAE Technical Paper 2006-01-0890 2006 10.4271/2006-01-0890
  28. Menter, F.R. Egorov, Y. 2005 “A Scale-Adaptive Simulation Model using Two-Equation Models” AIAA 2005-1095

Cited By

Recommended Content

Technical Paper Near-Nozzle Structure of Diesel Sprays Affected by Internal Geometry of Injector Nozzle: Visualized by Single-Shot X-ray Imaging
Technical Paper Application of Lda And Piv Techniques to the Validation of a Cfd Model of a Direct Injection Gasoline Engine
Technical Paper Multidimensional Modeling of Transient Gas Jet Injection Using Coarse Computational Grids