This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Computational Optimization of a Heavy-Duty Compression Ignition Engine Fueled with Conventional Gasoline

Journal Article
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 12, 2011 by SAE International in United States
Computational Optimization of a Heavy-Duty Compression Ignition Engine Fueled with Conventional Gasoline
Citation: Dempsey, A. and Reitz, R., "Computational Optimization of a Heavy-Duty Compression Ignition Engine Fueled with Conventional Gasoline," SAE Int. J. Engines 4(1):338-359, 2011,
Language: English


  1. Environmental Protection Agency (EPA) 2007
  2. Tao, F. Golovitchev, V. Chomiak, J. A phenomenological model for the prediction of soot formation in diesel spray combustion Combustion and Flame 136 270 282 2004
  3. Turns, S. R. An Introduction to Combustion McGraw-Hill 1996
  4. Combustion in Diesel Engines 2008
  5. Najt, P. Foster, D. “Compression-Ignited Homogeneous Charge Combustion,” SAE Technical Paper 830264 1983 10.4271/830264
  6. Tsurushima, T. Kunishima, E. Asaumi, Y. Aoyagi, Y. et al. “The Effect of Knock on Heat Loss in Homogeneous Charge Compression Ignition Engines,” SAE Technical Paper 2002-01-0108 2002 10.4271/2002-01-0108
  7. Takeda, Y. Keiichi, N. Keiichi, N. “Emission Characteristics of Premixed Lean Diesel Combustion with Extremely Early Staged Fuel Injection,” SAE Technical Paper 961163 1996 10.4271/961163
  8. Kimura, S. Aoki, O. Kitahara, Y. Aiyoshizawa, E. “Ultra-Clean Combustion Technology Combining a Low-Temperature and Premixed Combustion Concept for Meeting Future Emission Standards,” SAE Technical Paper 2001-01-0200 2001 10.4271/2001-01-0200
  9. Hasegawa, R. Yanagihara, H. “HCCI Combustion in DI Diesel Engine,” SAE Technical Paper 2003-01-0745 2003 10.4271/2003-01-0745
  10. Noehre, C. Andersson, M. Johansson, B. Hultqvist, A. “Characterization of Partially Premixed Combustion” SAE Technical Paper 2006-01-3412 2006 10.4271/2006-01-3412
  11. Johansson, B. High-Load Partially Premixed Combustion in a Heavy-Duty Diesel Engine Diesel Engine Emissions Reduction (DEER) Conference Presentations 2005 Chicago, IL
  12. Kalghatgi, G. Risberg, P. Ångström, H. “Advantages of Fuels with High Resistance to Auto-ignition in Late-injection, Low-temperature, Compression Ignition Combustion,” SAE Technical Paper 2006-01-3385 2006 10.4271/2006-01-3385
  13. Kalghatgi, G. Risberg, P. Ångström, H. “Partially Pre-Mixed Auto-Ignition of Gasoline to Attain Low Smoke and Low NOx at High Load in a Compression Ignition Engine and Comparison with a Diesel Fuel,” SAE Technical Paper 2007-01-0006 2007 10.4271/2007-01-0006
  14. Manente, V. Johansson, B. Tunestal, P. “Partially Premixed Combustion at High Load using Gasoline and Ethanol, a Comparison with Diesel,” SAE Technical Paper 2009-01-0944 2009 10.4271/2009-01-0944
  15. Manente, V. Tunestal, P. Johansson, B. Cannella, W. “Effects of Ethanol and Different Type of Gasoline Fuels on Partially Premixed Combustion from Low to High Load,” SAE Technical Paper 2010-01-0871 2010 10.4271/2010-01-0871
  16. Shi, Y. Reitz, R. D. Optimization of a heavy-duty compression-ignition engine fueled with diesel and gasoline-like fuels Fuel 2010 10.1016/j.fuel.2010.02.023
  17. Amsden, A. A. O'Rourke, P. J. Butler, T. D. KIVA-II - A computer program for chemically reactive flows with sprays 1989 Los Alamos National Laboratory Report LA-11560-MS
  18. Amsden, A. A. KIVA-3V: A block-structured KIVA program for engines with vertical or canted valves 1997 Los Alamos National Laboratory Report LA-13313-MS
  19. Amsden, A. A. KIVA-3V, Release 2, improvements to KIVA-3V 1999 Los Alamos National Laboratory Report LA-UR-99-915
  20. Kee, R. J. Rupley, F. M. Miller, J. A. CHEMKIN-II: A FORTRAN chemical kinetics package for the analysis of gas phase chemical kinetics 1989 Sandia Report SAND 89-8009
  21. Beale, J. C. Reitz, R. D. Modeling Spray Atomization with the Kelvin-Helmholtz/Rayleigh-Taylor hybrid model Atomization and Sprays 1999 9 623 650
  22. Abani, N. Munnannur, A. Reitz, R. D. Reduction of Numerical Parameter Dependencies in Diesel Spray Models Journal of Engineering for Gas Turbines and Power 2008 130 032809
  23. O'Rourke, P. Amsden, A. “A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model,” SAE Technical Paper 2000-01-0271 2000 10.4271/2000-01-0271
  24. Ra, Y. Reitz, R. D. The application of a multicomponent droplet vaporization model to gasoline direct injection engines International Journal of Engine Research 2003 4 193 218
  25. Han, Z. Reitz, R. D. Turbulence Modeling of Internal Combustion Engines Using RNG k-e Models Combustion Science and Technology 1995 106 267 295
  26. Shi, Y. Hessel, R. P. Reitz, R. D. An adaptive multi-grid chemistry (AMC) model for efficient simulation of HCCI and DI engine combustion Combustion Theory and Modeling 2009 13 1 83 104
  27. Ra, Y. Reitz, R. D. A reduced chemical kinetic model for IC engine combustion simulations with primary reference fuels Combustion and Flame 2008 155 713 738
  28. Fieweger, K. Blumenthal, R. Adomeit, G. Self Ignition of S.I. Engine Model Fuels A Shock Tube Investigation at High Pressure Combustion and Flame 1997 109 599 619
  29. Kong, S. C. Reitz, R. D. Modeling Diesel Spray Flame Liftoff, Sooting Tendency, and NOx Emissions Using Detailed Chemistry With Phenomenological Soot Model Journal of Engineering for Gas Turbines and Power 2007 129 245 251
  30. Sun, Y. Diesel Combustion Optimization and Emissions Reduction Using Adaptive Injection Strategies (AIS) with Improved Numerical Models PhD Thesis University of Wisconsin Madison, USA 2007
  31. Singh, S. Reitz, R. Musculus, M. “Comparison of the Characteristic Time (CTC), Representative Interactive Flamelet (RIF), and Direct Integration with Detailed Chemistry Combustion Models against Optical Diagnostic Data for Multi-Mode Combustion in a Heavy-Duty DI Diesel Engine,” SAE Technical Paper 2006-01-0055 2006 10.4271/2006-01-0055
  32. Wickman, D. Senecal, P. Reitz, R. “Diesel Engine Combustion Chamber Geometry Optimization Using Genetic Algorithms and Multi-Dimensional Spray and Combustion Modeling,” SAE Technical Paper 2001-01-0547 2001 10.4271/2001-01-0547
  33. Genzale, C. Reitz, R. Wickman, D. “A Computational Investigation into the Effects of Spray Targeting, Bowl Geometry and Swirl Ratio for Low-Temperature Combustion in a Heavy-Duty Diesel Engine,” SAE Technical Paper 2007-01-0119 2007 10.4271/2007-01-0119
  34. Shi, Y. Reitz, R.D. “Assessment of Optimization Methodologies to Study the Effects of Bowl Geometry, Spray Targeting and Swirl Ratio for a Heavy-Duty Diesel Engine Operated at High-Load,” SAE Int. J. Engines 1 1 537 557 2008 10.4271/2008-01-0949
  35. Deb, K. Pratap, A. Agarwal, S. Meyarivan, T. A Fast and Elist Multiobjective Genetic Algorithm: NSGA-II IEEE Transactions on Evolutionary Computation 2002 6 2 182 197
  36. Kokjohn, S.L. Reitz, R.D. “A Computational Investigation of Two-Stage Combustion in a Light-Duty Engine,” SAE Int. J. Engines 1 1 1083 1104 2008 10.4271/2008-01-2412
  37. Lin, Y. Zhang, H. H. Component Selection and Smoothing in Smoothing Spline Analysis of Variance Models 2003 NUCS
  38. Liu, Y. Reitz, R. D. Lu, F. The use of non-parametric regression to investigate the sensitivities of high-speed direct injection diesel emissions and fuel consumption to engine parameters International Journal of Engine Research 2006 7 167 180
  39. Hanson, R. Splitter, D. Reitz, R. “Operating a Heavy-Duty Direct-Injection Compression-Ignition Engine with Gasoline for Low Emissions,” SAE Technical Paper 2009-01-1442 2009 10.4271/2009-01-1442
  40. Eng, J. “Characterization of Pressure Waves in HCCI Combustion,” SAE Technical Paper 2002-01-2859 2002 10.4271/2002-01-2859
  41. Dec, J.E. Yang, Y. “Boosted HCCI for High Power without Engine Knock and with Ultra-Low NOx Emissions - using Conventional Gasoline,” SAE Int. J. Engines 3 1 750 767 2010 10.4271/2010-01-1086
  42. Ra, Y. Loeper, P. Reitz, R. Andrie, M. et al. “Study of High Speed Gasoline Direct Injection Compression Ignition (GDICI) Engine Operation in the LTC Regime,” SAE Int. J. Engines 4 1 1426 1444 2011 10.4271/2011-01-1182
  43. Gamma Technologies September 10 2009

Cited By