This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Diesel Emissions in Review

Journal Article
2011-01-0304
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 12, 2011 by SAE International in United States
Diesel Emissions in Review
Sector:
Citation: Johnson, T., "Diesel Emissions in Review," SAE Int. J. Engines 4(1):143-157, 2011, https://doi.org/10.4271/2011-01-0304.
Language: English

References

  1. Johnson, T.V. “Review of Diesel Emissions and Control,” SAE Int. J. Fuels Lubr. 3 1 16 29 2010 10.4271/2010-01-0301
  2. Public Workshop to Discuss Potential Technologies for 2017 and Later Model Year Passenger Vehicles - LEV III May 18 2010 El Monte, California http://www.arb.ca.gov/msprog/levprog/leviii/leviii.htm
  3. Public Workshop to Discuss Proposed Modifications to Criteria and Greenhouse Gas Emission Requirements for Light- and Medium-Duty Vehicles - Advanced Clean Cars November 16 2010 El Monte, California http://www.arb.ca.gov/msprog/levprog/leviii/leviii.htm
  4. Cackette, T. “The Path to Low Carbon Passenger Vehicles” US Department of Energy “Directions in Engine Efficiency and Emissions Research (DEER) Conference” September 27 30 2010 Detroit
  5. Interim Joint Technical Assessment Report Light-Duty Vehicle Greenhouse Gas Emission Standards and Corporate Average Fuel Economy Standards for Model Years 2017-2025 http://www.epa.gov/otaq/climate/regulations/ldv-ghg-tar.pdf
  6. An, F. et al. “Passenger Vehicle Greenhouse Gas and Fuel Economy Standards: A Global Update” International Council on Clean Transportation June 2008 November 2009 http://www.TheICCT.org
  7. Lakshminarayanan, P.A. “The Introduction of Bharat Stage 4 into the Indian Market,” SAE 2010 Heavy Duty Diesel Emissions Control Symposium September 2010
  8. Proposed Rulemaking: Greenhouse Gas Emissions Standards and Fuel Efficiency Standards for Medium- and Heavy-Duty Engines and Vehicles November 30 2010 Federal Register 75 229 November 30 2010
  9. Wani, K. “Fuel Efficiency Standard for Heavy-Duty Vehicles in Japan” International Workshop: Fuel Efficiency Policies for Heavy-Duty Vehicles International Energy Agency Paris June 2007
  10. Johnson, T. V. “Review of CO 2 Emissions and Technologies in the Road Transportation Sector,” SAE Int. J. Engines 3 1 1079 1098 2010 10.4271/2010-01-1276
  11. Körfer, T. Schnorbus, T. Kalenborn, M. Kolbeck, A. Bourgoin, G. Cecur, M. Raimondi, E. “Integrated Diesel Engine Concept for Lowest CO 2 -Emission Requirements” Aachen Colloquium October 2010
  12. Tatur, M. “Future Directions in Engines and Vehicles” US Department of Energy “Directions in Engine Efficiency and Emissions Research (DEER) Conference” September 27 30 2010 Detroit
  13. Körfer, T. Lamping, M. Kolbeck, A. Pischinger, S. et al. “Potential of Modern Diesel Engines with Lowest Raw Emissions - a Key Factor for Future CO2 Reduction,” SAE Technical Paper 2009-26-025 2009 10.4271/2009-26-025
  14. Tomoda, T. Ohki, H. Koyama, T. Fujiwara, K. “Study of Diesel Combustion Improvement for Ultra Low Compression Ratio” Aachen Colloquium October 2010
  15. Weißbäck, M. Sorger, H. Zieher, F. Howlett, M. Krapf, S. Gutmann, P. “Tomorrow's Diesel Engines: Layout and Achieved Results Examples from Current Development Projects in a Production Context” Aachen Colloquium October 2010
  16. Cisternino, M. “Influence of Mild Hybridization on Performance and Emission in a 4 Cylinder in-Line Common Rail Diesel Engine” US Department of Energy “Directions in Engine Efficiency and Emissions Research (DEER) Conference” September 27 30 2010 Detroit
  17. Krüger, M. Cornetti, G. Greis, A. Weidmann, U. Schumacher, H. Ger, J. “Operational Strategies of a Diesel Hybrid Electric Vehicle with Focus on the Combustion Engine” Aachen Colloquium October 2010
  18. Charlton, S. J. “Meeting the US Heavy-Duty EPA 2010 Standards and Providing Increased Value for the Customer” AVL 6th International Exhaust Gas and Particulate Emissions Forum March 2010 Ludwigsburg, Germany
  19. Parche, M. Sassen, K. P. Leonhard, R. Alvarez-Avila, C. “Bosch 2000/2200 bar Common Rail System for Commercial Vehicles” Vienna Motorsymposium April 2010
  20. Sassen, K.P. “Optimized CV-Solutions for Low Emissions and High Performance,” SAE 2010 Heavy Duty Diesel Emissions Control Symposium September 2010
  21. Stanton, D. “Technology Development for High Efficiency Clean Diesel Engines and a Pathway to 50% Thermal Efficiency” US Department of Energy Directions in Engine Efficiency and Emissions Research (DEER) Conference Dearborn, Michigan August 2009
  22. Ligterink, N. de Lange, R. Vermeulen, R. Dekker, H. “On-Road NOx Emissions of Euro-V Trucks” TNO report MON-RPT-033-DTS-2009-03840 2 December 2009 Assignor Ministerie van VROM Den Haag
  23. Dollmeyer, T. Grana, T. “Meeting The US Heavy-Duty EPA 2010 Standards” 3rd International IAV MinNOx Conference Berlin 29 June 2010
  24. Charlton, S.J. “Meeting the US Heavy-Duty EPA 2010 Standards and Providing Increased Value for the Customer,” SAE 2010 Heavy Duty Diesel Emissions Control Symposium September 2010
  25. Conicella, F. “Low Particulate Combustion Development of Medium Duty Engines for Off-Highway Application” MTZ Conference on On/Off Highway Engines Friedrichshafen November 2009
  26. Unger, H.-M. “Modular Exhaust Gas Treatment System for Off - Highway Applications” 3rd International CTI Conference 12th 13th Oct. 2010 Stuttgart
  27. Jaussi, F. “Emission Concepts for Off-Highway Applications” 3rd International CTI Conference 12th 13th Oct. 2010 Stuttgart
  28. Macaudiere, P. “SCR as a Technical Response to Automotive Environmental Challenges” 3rd International IAV MinNOx Conference Berlin 29 June 2010
  29. Zhan, R. Li, W. Eakle, S. T. Weber, P. A. “Development of a Novel Device to Improve Urea Evaporation, Mixing and Distribution to Enhance SCR Performance” SAE 2010-01-1185
  30. Kröcher, O. Elsener, M. Mehring, M. Bernhard, A. “Highly-Developed Thermal Analysis Methods for the Characterization of Soot and Deposits in Urea SCR Systems” AVL 6th International Exhaust Gas and Particulate Emissions Forum March 2010 Ludwigsburg, Germany
  31. Brück, R. Holz, O. Konieczny, R. “SCR Upgraded Aftertreatment System for EU VI Vehicles to Reduce Urban NOx Emissions” 3rd International IAV MinNOx Conference Berlin June 2010
  32. Johannessen, T. “Compact Ammonia Storage Systems for Fuel-Efficient NOX Emissions Reduction” CTI Conference on SCR Systems Stuttgart Germany July 2010
  33. Fischer, M. “Customised NOx Aftertreatment for Diesel Passenger Cars to Meet Worldwide Emission Standards” International Quality and Productivity Center (IQPC) Conference November 2010
  34. Kamasamudram, K. Currier, N. Szailer, T. Yezerets, A. “Why Cu- and Fe-Zeolite SCR Catalysts Behave Differently at Low Temperatures,” SAE Int. J. Fuels Lubr. 3 1 664 672 2010 10.4271/2010-01-1182
  35. Nova, I. Colombo, M. Tronconi, E. Schmeisser, V. Weibel, M. “Transient Kinetic Study and Modelling of the NO/NO2 NH3-SCR Reactions over Cu- and Fe-Zeolite Catalysts for Diesel Exhaust Aftertreatment” 3rd International IAV MinNOx Conference Berlin June 2010
  36. Ido, T. Yoshimura, K. Kunieda, M. Tamura, Y. et al. “Volume Reduction of SCR Catalyst Using Zeolite-Base Honeycomb Substrate,” SAE Int. J. Fuels Lubr. 3 1 614 624 2010 10.4271/2010-01-1170
  37. Forzatti, P. Nova, I. Tronconi, E. “Removal of NOx from Diesel Exhausts: The New “Enhanced NH3-SCR” Reaction,” SAE Int. J. Fuels Lubr. 3 1 654 663 2010 10.4271/2010-01-1181
  38. Yang, X. Narala, C. “Simple Approach to Tuning Catalytic Activity of MFI-Zeolites for Low Temperature SCR of NOx” US Department of Energy “Directions in Engine Efficiency and Emissions Research (DEER) Conference” September 27 30 2010 Detroit
  39. Rohart, E. Marques, R. Kröcher, O. Elsener, M. Harris, D. Jones, C. “Progress on Acidic Zirconia Mixed Oxides for Efficient NH3-SCR Catalysis” 3rd International IAV MinNOx Conference Berlin June 2010
  40. Casapu, M. Bernhard, A. Peitz, D. Mehring, M. Elsener, M. Kröcher, O. “New CeO2 - Based Catalysts for the SCR of NO with NH3” ADAP Catalyst Conference Krakow September 2010
  41. Chapman, D.M. Fu, G. Augustine, S. Watson, M. et al. “New Titania Materials with Improved Stability and Activity for Vanadia-Based Selective Catalytic Reduction of NOx,” SAE Int. J. Fuels Lubr. 3 1 643 653 2010 10.4271/2010-01-1179
  42. Walker, A.P. “Optimising Future Catalyst Systems,” SAE 2010 Heavy Duty Diesel Emissions Control Symposium September 2010
  43. Adelman, B. Santhanam, S. Strots, V. Miller, M. Derybowski, E. “Direct NH 3 Addition to Exhaust Streams Employing a Combined PM/NOx Reduction Aftertreatment Device for US2010 and EURO VI Applications” 3rd International IAV MinNOx Conference Berlin June 2010
  44. Folić, M. Lemus, L. Gekas, I. Vressner, A. “Selective Ammonia Slip Catalyst Enabling Highly Efficient NOx Removal Requirements of the Future” US Department of Energy “Directions in Engine Efficiency and Emissions Research (DEER) Conference” September 27 30 2010 Detroit
  45. Guo, G. Warner, J. Cavataio, G. Dobson, D. et al. “The Development of Advanced Urea-SCR Systems for Tier 2 Bin 5 and Beyond Diesel Vehicles,” SAE Technical Paper 2010-01-1183 2010 10.4271/2010-01-1183
  46. Laroo, C.A. “EPA SCR Unregulated Emissions Test Program: Dioxin, Furan, PCB, and PAH Emissions from a Compression Ignition Engine Utilizing CuZ SCR,” SAE 2010 World Congress & Exhibition April 2010
  47. Qi, G. Kim, C. Li, W. “Pt-Free, Perovskite-Based LNT Catalyst” US Department of Energy “Directions in Engine Efficiency and Emissions Research (DEER) Conference” September 27 30 2010 Detroit
  48. Bonzi, R. Lietti, L. Castoldi, L. Forzatti, P. “NOx Removal Over a Double-Bed NSR-SCR Reactor Configuration” Catalysis Today 151 2010 376 385
  49. Kodama, Y. Wong, V.W. “Study of On-Board Ammonia (NH3) Generation for SCR Operation,” SAE Int. J. Fuels Lubr. 3 1 537 555 2010 10.4271/2010-01-1071
  50. Xu, L. McCabe, R. Dearth, M. Ruona, W. “Laboratory and Vehicle Demonstration of “2nd-Generation” LNT + in-situ SCR Diesel NOx Emission Control Systems,” SAE Int. J. Fuels Lubr. 3 1 37 49 2010 10.4271/2010-01-0305
  51. Forzatti, P. Lietti, L. Nova, I. Morandi, S. Prinetto, F. Ghiotti, G. “Reaction Pathway of the Reduction by CO under Dry Conditions of NOx Species Stored onto PtABa/A12O3 Lean NOx Trap Catalysts” Journal of Catalysis 274 2010 163 175
  52. Theis, J.R. Ura, J.A. McCabe, R.W. “The Effects of Sulfur Poisoning and Desulfation Temperature on the NOx Conversion of LNT+SCR Systems for Diesel Applications,” SAE Int. J. Fuels Lubr. 3 1 1 15 2010 10.4271/2010-01-0300
  53. Chen, H.-Y. Weigert, E.C. Fedeyko, J.M. Cox, J.P. et al. “Advanced Catalysts for Combined (NAC + SCR) Emission Control Systems,” SAE Technical Paper 2010-01-0302 2010 10.4271/2010-01-0302
  54. Murayama, T. Aoyagi, Y. Kobayashi, M. Adachi, T. et al. “Effective Usage of LNT in High Boosted and High EGR Rate of Heavy Duty Diesel Engine,” SAE Technical Paper 2010-01-1066 2010 10.4271/2010-01-1066
  55. Warner, J.R. Dobson, D. Cavataio, G. “A Study of Active and Passive Regeneration Using Laboratory Generated Soot on a Variety of SiC Diesel Particulate Filter Formulations,” SAE Int. J. Fuels Lubr. 3 1 149 164 2010 10.4271/2010-01-0533
  56. Southward, B.W.L. Basso, S. Pfeifer, M. “On the Development of Low PGM Content Direct Soot Combustion Catalysts for Diesel Particulate Filters,” SAE Technical Paper 2010-01-0558 2010 10.4271/2010-01-0558
  57. Iretskaya, S. Golden, S. Tadrous, T. Long, S.H. “PM Control with Low NO 2 Tailpipe Emissions by Systems with Non-PGM Catalyzed DPF for Passive Soot Regeneration,” SAE Technical Paper 2010-01-0563 2010 10.4271/2010-01-0563
  58. Karin, P. Hanamura, K. “Particulate Matter Trapping and Oxidation on a Catalyst Membrane,” SAE Int. J. Fuels Lubr. 3 1 368 379 2010 10.4271/2010-01-0808
  59. Mizutani, T. Iwasaki, S. Miyairi, Y. Yuuki, K. et al. “Performance Verification of Next Generation Diesel Particulate Filter,” SAE Technical Paper 2010-01-0531 2010 10.4271/2010-01-0531
  60. Heibel, A. “Advancements in Substrate Technology,” SAE 2010 Heavy Duty Diesel Emissions Control Symposium September 2010
  61. Boger, T. Jamison, J. A. Warkins, J. L. Golomb, N. A. Warren, C. J. Heibel, A. K. “Next Generation Aluminum-Titanate Material to Meet Upcoming EU6 Emissions Legislation Requirements” Aachen Colloquium October 2010
  62. Weigl, M. C. Roduner, C. Lauer, T. “Particle-Filter-Onboard-Diagnosis by Means of a Soot-Sensor Downstream of the Particle-Filter” AVL 6th International Exhaust Gas and Particulate Emissions Forum March 2010 Ludwigsburg, Germany
  63. Finch, S. Hnilicka, B. Sindano, H. “EURO6 Light-Duty Vehicle OBD Project - Evaluation and Assessment of Proposed EOBD Emission Thresholds” ACEA-Commissioned Report RD. 10/320201.4 November 2010
  64. Kondo, A. Sakuma, T. Sakurai, T. Egami, T. Tokuda, M. Yokoi, S. “New Particulate Matter Sensor for On-Board Diagnostics” Aachen Colloquium October 2010
  65. Besch, M. C. Thiruvengadam, A. Carder, D. Littera, D. Mulone, V. Tikkanen, J. Gautam, M. “In-Line, Real-Time Exhaust PM Emissions Sensor -OBD and DPF Control System Applications” 20 th CRC On-Road Vehicle Emissions Workshop March 2010 San Diego, CA
  66. Zidat, S. “Diesel Particulate Filters On Board Diagnostic” US Department of Energy “Directions in Engine Efficiency and Emissions Research (DEER) Conference” September 27 30 2010 Detroit
  67. Austin, G. Naber, J. Johnson, J. Hutton, C. “Effects of Biodiesel Blends on Particulate Matter Oxidation in a Catalyzed Particulate Filter during Active Regeneration,” SAE Int. J. Fuels Lubr. 3 1 194 218 2010 10.4271/2010-01-0557
  68. Strzelec, A. Toops, T. Daw, S. Foster, D. Rutland, C “Particulate Matter Oxidation Kinetics: Surface Area Dependence” CLEERS Conference 2010
  69. Tsushima, S. Nakamura, I. Sakashita, S. Hirai, S. et al. “Lattice Boltzmann Simulation on Particle Transport and Captured Behaviors in a 3D-Reconstructed Micro Porous DPF,” SAE Technical Paper 2010-01-0534 2010 10.4271/2010-01-0534
  70. Spurk, P. Frantz, S. Schütze, F. W. Noack, H. D. Müller, W. “NO2 Formation on the DOC/DPF System - a system thought” AVL 6th International Exhaust Gas and Particulate Emissions Forum March 2010 Ludwigsburg, Germany

Cited By