Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Flame Kernel Development for a Spark Initiated Pre-Chamber Combustion System Capable of High Load, High Efficiency and Near Zero NOx Emissions

Journal Article
2010-01-2260
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2010-01-2260
Published October 25, 2010 by SAE International in United States
Flame Kernel Development for a Spark Initiated Pre-Chamber Combustion System Capable of High Load, High Efficiency and Near Zero NOx Emissions
Sector:
Citation: Attard, W. and Parsons, P., "Flame Kernel Development for a Spark Initiated Pre-Chamber Combustion System Capable of High Load, High Efficiency and Near Zero NOx Emissions," SAE Int. J. Engines 3(2):408-427, 2010, https://doi.org/10.4271/2010-01-2260.
Language: English

References

  1. Turkish, M.C. “3-Valve Stratified Charge Engines: Evolvement, Analysis and Progression,” SAE Technical Paper 741163 1974 10.4271/741163
  2. Ricardo, H.R. Recent Work on the Internal Combustion Engine SAE Transactions 17 May 1922
  3. Gussak, L.A. Karpov, V.P. Slutskii, V.G. Spasskii, A.I. Burning Rate and Stability in Forechamber Flame Ignition in an Internal-Combustion Engine Combustion, Explosion, and Shock Waves (Historical Archive) 1984 19 5 628 630
  4. Gussak, L.A. Ryabikov, O.B. Politenkova, G.G. Furman, G.A. Yield of Atomic Hydrogen During Combustion of Methane and Hydrogen Mixtures with Air Russian Chemical Bulletin (Historical Archive) 1974 23 2 451 452
  5. Gussak, L.A. Karpov, V.P. Tikhonov, Y.Y. “The Application of the Lag-Process in Pre-chamber Engines,” SAE Technical Paper 790692 1979 10.4271/790692
  6. Toulson, E. Schock, H. Attard, W.P. “A Review of Pre-Chamber Initiated Jet Ignition Combustion Systems,” SAE Technical Paper 2010-01-2263 2010 10.4271/2010-01-2263
  7. Attard, W.P. Toulson, E. Fraser, N. Parsons, P. “A Turbulent Jet Ignition Pre-Chamber Combustion System for Large Fuel Economy Improvements in a Modern Vehicle Powertrain,” SAE Int. J. Fuels Lubr. 3 2 20 37 2010 10.4271/2010-01-1457
  8. Toulson, E. Watson, H.C. Attard, W.P. “Modelling Alternative PreChamber Fuels in Jet Assited Igniton of Gasoline and LPG,” SAE Technical Paper 2009-01-0721 2009 10.4271/2009-01-0721
  9. Gussak, L.A. LAG-Process of Combustion and its Application in Automobile Engines. IMechE C257/76 1976 137 145
  10. Wyczalek, F.A. Harned, J.L. Maksymiuk, S. Blevins, J.R. “EFI Prechamber Torch Ignition of Lean Mixtures,” SAE Technical Paper 750351 1975 10.4271/750351
  11. Couet, S. Higelin, P. Moreau, B. “APIR: A New Firing Concept for the Internal Combustion Engines - Sensitivity to Knock and In-Cylinder Aerodynamics,” SAE Technical Paper 2001-01-1954 2001 10.4271/2001-01-1954
  12. Gledhill, M. Using Hydrogen Assisted Jet Ignition to Extend the Knock Limit Department of Mechanical and Manufacturing Engineering, University of Melbourne 2010
  13. Gussak, L.A. “The Role of Chemical Activity and Turbulence Intensity in Pre-chamber-Torch Organization of Combustion of a Stationary Flow of a fuel-air Mixture,” SAE Technical Paper 830592 1983 10.4271/830592
  14. Gussak, L.A. Ryabikov, O.B. Politenkova, G.G. Furman, G.A. Effect of Adding Individual Combustion Products on Combustion of Methane Air Mixture Russian Chemical Bulletin (Historical Archive) 1973 22 9 2128
  15. Maxson, J.A. Hensinger, D.M. Hom, K. Oppenheim, A.K. “Performance of Multiple Stream Pulsed Jet Combustion Systems,” SAE Technical Paper 910565 1991 10.4271/910565
  16. Maxson, J.A. Oppenheim, A.K. Pulsed Jet Combustion- Key to a Refinement of the Stratified Charge Concept. Twenty-Third Symposium (International) on Combustion 1990
  17. Hensinger, D.M. Maxson, J.A. Hom, K. Oppenheim, A.K. “Jet Plume Injection and Combustion,” SAE Technical Paper 920414 1992 10.4271/920414
  18. Murase, E. Hanada, K. “Enhancement of Combustion By Injection of Radicals,” SAE Technical Paper 2000-01-0194 2000 10.4271/2000-01-0194
  19. Murase, E. Hanada, K. “Control of the Start of HCCI Combustion by Pulsed Flame Jet,” SAE Technical Paper 2002-01-2867 2002 10.4271/2002-01-2867
  20. Murase, E. Hanada, K. Ignition Timing Control of Homogeneous Charge Compression Ignition Engines by Pulsed Flame Jets Combustion Science and Technology 2002 174 129 140
  21. Murase, E. Ono, S. Hanada, K. Ho Yun, J. Oppenheim, A.K. Performance of Pulsed Combustion Jet at High Pressures and Temperatures JSAE Review 1996 17 245 250
  22. Murase, E. Ono, S. Hanada, K. Oppenheim, A.K. “Pulsed Combustion Jet Ignition in Lean Mixtures,” SAE Technical Paper 942048 1994 10.4271/942048
  23. Oppenheim, A.K. Combustion in Piston Engines : Technology, Evolution, Diagnosis and Control 2004 New York Springer
  24. Oppenheim, A.K. Beltramo, J. Faris, D.W. Maxson, J.A. Hom, K. Stewart, H.E. “Pulsed Jet Combustion - A Key to Controlled Combustion Engines,” SAE Technical Paper 890153 1989 10.4271/890153
  25. Latsch, R. “The Swirl Chamber Spark Plug: A Means of Faster, More Uniform Energy Conversion in the Spark Ignition Engine,” SAE Technical Paper 840455 1984 10.4271/840455
  26. Dober, G.G. Watson, H.W. Modelling the Flame Enhancement of a HAJI Equipped Spark Ignition Engine IPC-10 Proceedings 1999
  27. Glasson, N.D. Lumsden, G. Dingli, R. Watson, H.W. “Development of the HAJI System for a Multi-Cylinder Spark Ignition Engine,” SAE Technical Paper 961104 1996 10.4271/961104
  28. Hamori, F. Watson, H.C. Hydrogen Assisted Jet Ignition for the Hydrogen Fuelled SI Engine. World Hydrogen Energy Conference 2006 Lyon, France
  29. Kyaw, Z.H. Watson, H.C. Hydrogen Assisted Jet Ignition for Near Elimination of NOx and Cyclic Variability in the S.I. Engine. Twenty-Fourth Symposium on Combustion 1992 24 1 1449 1455
  30. Lawrence, J. Watson, H.C. “Hydrocarbon Emissions from a HAJI Equipped Ultra-Lean Burn SI Engine,” SAE Technical Paper 980044 1998 10.4271/980044
  31. Toulson, E. Applying Alternative Fuels in Place of Hydrogen to the Jet Ignition Process Department of Mechanical and Manufacturing Engineering, University of Melbourne 2008
  32. Toulson, E. Watson, H.C. Attard, W.P. “The Lean Limit and Emissions at Near-Idle for a Gasoline HAJI System with Alternative Pre-Chamber Fuels,” SAE Technical Paper 2007-24-0120 2007 10.4271/2007-24-0129
  33. Toulson, E. Watson, H.C. Attard, W.P. The Lean Limit and Emissions of a Gasoline HAJI System that Employs Syngas in Place of Hydrogen as the Prechamber Fuel. FISITA 2008 Paper F2008-SC-002 2008 Munich, Germany
  34. Toulson, E. Watson, H.C. Attard, W.P. “Gas Assisted Jet Ignition of Ultra-Lean LPG in a Spark Ignition Engine,” SAE Technical Paper 2009-01-0506 2009 10.4271/2009-01-0506
  35. Lezanski, T. Kesler, M. Rychter, T. Teodorczyk, A. Wolanski, P. “Performance of a Pulsed Jet Combustion (PJC) System in a Research Engine,” SAE Technical Paper 932709 1993 10.4271/932709
  36. Wolanski, P. Oppenheim, A.K. “Controlled Combustion Engines (CCE),” SAE Technical Paper 1999-01-0324 1999 10.4271/1999-01-0324
  37. Kesler, M. Rychter, T.J. “A Jet Dispersed Combustion (JDC) Method to Stimulate Lean Burning in SI Piston Engines,” SAE Technical Paper 951006 1995 10.4271/951006
  38. Kito, S. Wakai, K. Takahashi, S. Fukaya, N. Takada, Y. Ignition Limit of Lean Mixture by Hydrogen Flame Jet Ignition. JSAE Review 2000 21 3 373 378
  39. Wakai, K. Kito, S. Isao, S. “Effect of Small Hydrogen Jet Flame on Augmentation of Lean Combustion,” SAE Technical Paper 931943 1993 10.4271/931943
  40. Robinet, C. Higelin, P. Moreau, B. Pajot, O. Andrzejewski, I. “A New Firing Concept for Internal Combustion Engines: “1'APIR,” SAE Technical Paper 1999-01-0621 1999 10.4271/1999-01-0621
  41. Geiger, J. Pischinger, S. Bowing, R. Koß, H.J. Thiemann, J. “Ignition Systems for Highly Diluted Mixtures in SI Engines,” SAE Technical Paper 1999-01-0799 1999 10.4271/1999-01-0799
  42. Kettner, M. Rothe, M. Velji, A. Spicher, U. Kuhnert, D. Latsch, R. “A New Flame Jet Concept to Improve the Inflammation of Lean Burn Mixtures in SI Engines,” SAE Technical Paper 2005-01-3688 2005 10.4271/2005-01-3688
  43. Weng, V. Gindele, J. Topfer, G. Spicher, U. Kuhnert, D. Latsch, R. “Investigation of the Bowl-Pre-Chamber-Ignition (BPI) Concept in a Direct-Injection Gasoline Engine At Part Load,” SAE Technical Paper 1999-01-3658 1999 10.4271/1999-01-3658
  44. Najt, P.M. Rask, R.B. Reuss, D.L. Dual Mode Engine Combustion Process. 2003 United States Patent No. 6595181
  45. Kojic, A. Hathout, J.-P. Cook, D. Ahmed, J. Control of Auto-Ignition Timing for Homogeneous Combustion Jet Ignition Engines. 2005 United States Patent No. PCT/US2004/029613
  46. Kojic, A. Hathout, J.-P. Cook, D. Ahmed, J. Control of Auto-Ignition Timing for Combustion in Piston Engines by Prechamber Compression Ignition. 2005 United States Patent No. PCT/US2004/029612
  47. Pape, J. Getzlaff, J. Gruenig, C. Kuhnert, D. Latsch, R. “Investigations on Pre-Chamber Spark Plug with Pilot Injection,” SAE Technical Paper 2007-01-0479 2007 10.4271/2007-01-0479
  48. Attard, W.P. Kohn, J. Parsons, P. “Ignition Energy Development for a Spark Initiated Combustion System Capable of High Load, High Efficiency and Near Zero NOx Emissions,” SAE Int. J. Engines 3 2 481 496 2010 10.4271/2010-32-0088
  49. Attard, W.P. Parsons, P. “A Normally Aspirated Spark Initiated Combustion System Capable of High Load, High Efficiency and Near Zero NOx Emissions in a Modern Vehicle Powertrain,” SAE Int. J. Engines 3 2 269 287 2010 10.4271/2010-01-2196
  50. Dober, G.G. Geometrical Control of Hydrocarbon Emissions Department of Mechanical and Manufacturing Engineering, University of Melbourne 2002
  51. Cairns, A. Blaxill, H. “The Effects of Combined Internal and External Exhaust Gas Recirculation on Gasoline Controlled Auto-Ignition,” SAE Technical Paper 2005-01-0133 2005 10.4271/2005-01-0133
  52. Heywood, J.B. Internal Combustion Engine Fundamentals McGraw-Hill 0-07-100499-8 1988
  53. Alger, T. Chauvet, T. Dimitrova, Z. “Synergies between High EGR Operation and GDi Systems,” SAE Int. J. Engines 1 1 101 114 2008
  54. Amann, C.A. “Cylinder Pressure Measurement and its use in Engine Research,” SAE Technical Paper 852067 1985 10.4271/852067
  55. Lancaster, D.R. Krieger, R.B. Lienesch, J.H. “Measurement and Analysis of Engine Pressure Data,” SAE Technical Paper 750026 1975 10.4271/750026
  56. Alger, T. Mangold, B. Mehta, D. Roberts, C. “The Effect of Sparkplug Design on Initial Flame Kernel Development and Sparkplug Performance,” SAE Technical Paper 2006-01-0224 2006 10.4271/2006-01-0224
  57. Heywood, J.B. Automotive Engines and Fuels: A Review of Future Options Progress in Energy and Combustion Science 7 3 155 184 1981

Cited By

Recommended Content

Journal Article A Normally Aspirated Spark Initiated Combustion System Capable of High Load, High Efficiency and Near Zero NOx Emissions in a Modern Vehicle Powertrain
Journal Article Ignition Energy Development for a Spark Initiated Combustion System Capable of High Load, High Efficiency and Near Zero NOx Emissions
Technical Paper Development of KMC 2.4L Lean Burn Engine