This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
High Efficiency, Low Feedgas NOx, and Improved Cold Start Enabled by Low-Temperature Ethanol Reforming
Journal Article
2010-01-0621
ISSN: 1946-3936, e-ISSN: 1946-3944
Sector:
Topic:
Citation:
Morgenstern, D., Wheeler, J., and Stein, R., "High Efficiency, Low Feedgas NOx, and Improved Cold Start Enabled by Low-Temperature Ethanol Reforming," SAE Int. J. Engines 3(1):529-545, 2010, https://doi.org/10.4271/2010-01-0621.
Language:
English
References
- Ivanič Ž Ayala F. Goldwitz J. Heywood J.E. “Effects of Hydrogen Enhancement on Efficiency and NOx Emissions of Lean and EGR-Diluted Mixtures in a SI Engine,” SAE Paper 2005-01-0253
- Kirwan, J.E. Quader, A.A. Grieve, M.J. “Fast Start-up On-Board Gasoline Reformer for Near Zero Emissions in Spark Ignition Engines,” SAE Technical Paper 2002-01-1011 2002
- Suzuki, T. Sakurai, Y. “Effect of Hydrogen Rich Gas and Gasoline Mixed Combustion on Spark Ignition Engine,” SAE Technical Paper 2006-01-3379 2006
- Huber J. Preis M. Ringler J. Liebl C. US Patent Application 2009/0071420 “Operating Method for a System Composed of a Reformer and a Catalytic Exhaust Gas Aftertreatment Device.”
- Calabro D.C. Partridge R.D. Berlowitz P.J. Carstensen B. Deckman H.W. DaPrato P.L. Hershkowitz F. Socha R.F. “A Dual Functional Staged Hydrogen Purifier for an Integrated Fuel Processor Fuel Cell Power System,” Catal. Today 129 2007 380 90
- Allgeier T. Klenk M. Landenfeld T. Conte E. Boulouchos K. Czerwinski J. “Advanced Emission and Fuel Economy Concept Using Combined Injection of Gasoline and Hydrogen in SI-Engines,” SAE Paper 2004-01-1270
- Cracknell, R.F. Kramer, G.J. Vos, E. “Designing Fuels Compatible with Reformers and Internal Combustion Engines,” SAE Technical Paper 2004-01-1926 2004
- Tully, E.J. Heywood, J.B. “Lean-Burn Characteristics of a Gasoline Engine Enriched with Hydrogen from a Plasmatron Fuel Reformer,” SAE Technical Paper 2003-01-0630 2003
- Quader, A.A. Kirwan, J.E. Grieve, M.J. “Engine Performance and Emissions Near the Dilute Limit with Hydrogen Enrichment Using an On-Board Reforming Strategy,” SAE Technical Paper 2003-01-1356 2003
- Cheng W.H. “Development of Methanol Decomposition Catalysts for Production of H 2 and CO,” Acc. Chem. Res . 32 1999 685 91
- Palo D.R. Dagle R.A. Holladay J.D. “Methanol Steam Reforming for Hydrogen Production,” Chem. Rev . 107 2007 3992 4021
- Hirota T. “Study of the Methanol-Reformed Gas Engine,” JSAE Rev. 4 1981 7 13
- Adams, T.G. “A Comparison of Engine Performance Using Methanol or Dissociated Methanol As The Fuel,” SAE Technical Paper 845128 1984
- Yoo, S.J. Lee, C. “Feasibility Evaluation of Reformed Methanol Usage to Spark Ignition Engine,” SAE Technical Paper 871166 1987
- Pettersson L. Sőstrőm K. “An Experimental and Theoretical Evaluation of the Onboard Decomposed Methanol Spark Ignition Engine,” Combust. Sci. Tech . 71 1990 129 43
- Morgenstern D.A. Fornango J.P “Low-Temperature Reforming of Ethanol over Copper-Plated Raney Nickel: A New Route to Sustainable Hydrogen for Transportation,” Energy and Fuels 19 2005 1708 16
- Song H. Zhang L. Watson R.B. Braden D. Ozkan U.S. “Investigation of Bio-Ethanol Steam Reforming Over Cobalt-Based catalysts,” Catal. Today 129 2007 346 54
- Deluga G. A. Salge J. R. Schmidt L. D. Verykios X. E. “Renewable Hydrogen from Ethanol by Autothermal Reforming,” Science 303 2004 993 7
- Sheng P.Y. Chiu W.W. Yee A. Morrison S.J. Idriss H. “Hydrogen Production from Ethanol Over Bimetallic Rh-M/CeO 2 (M = Pd or Pt),” Catal. Today 129 2007 313 21
- Hoffmann, W. Wong, V.W. Cheng, W.K. Morgenstern, D.A. “A New Approach to Ethanol Utilization: High Efficiency and Low NOx in an Engine Operating on Simulated Reformed Ethanol,” SAE Technical Paper 2008-01-2415 2008
- Saanum, I. Bysveen, M. Tunestål, P. Johansson, B. “Lean Burn Versus Stoichiometric Operation with EGR and 3-Way Catalyst of an Engine Fueled with Natural Gas and Hydrogen Enriched Natural Gas,” SAE Technical Paper 2007-010-0015 2007
- Nehmer D. A. Fluechinger L. “Development of a Fully Flexible Hydraulic Valve Actuation Engine, Part I: Hydraulic Valve Actuation System Development,” Proceedings of the 2002 Global Powertrain Congress (GPC) on Advanced EngineDesign and Performance Ann Arbor, Michigan September 24 - 26 2002
- Stein R.A. Chou T. Lyjak J.C. “The Combustion System of the Ford 5.4L 3-Valve Engine” Global Powertrain Congress 2003
- Jung, H.H. Stein, R.A. Leone, T.G. “Comparison of Dual Retard VCT to Continuously Variable Event Valvetrain” SAE Paper 2004-01-1268
- Brusstar M.J. Gray C.L. Jr. “High Efficiency with Future Alcohol Fuels in a Stoichiometric Medium Duty Spark Ignition Engine,” SAE Technical Paper 2007-01-3993 2007
- Kőnig, A. Ellinger, K.-W. Korbel, K. “Engine Operation on Partially Dissociated Methanol,” SAE Technical Paper 850573 1985
- Tsunooka, T. Hosokawa, Y. Utsumi, S. Kawai, T. et al. “High Concentration Ethanol Effect on SI Engine Cold Startability,” SAE Technical Paper 2007-01-2036 2007
- Aikawa, K. Sakurai, T. Hayashi, A. “Study of Ethanol-Blended Fuel (E85) Effects Under Cold-Start Conditions,” SAE Int. J. Fuels Lubr . 2 1 196 203 2009
- Lupescu, J.A. Chanko, T.B. Richert, J.F. DeVries, J.E. “Treatment of Vehicle Emissions from the Combustion of E85 and Gasoline with Catalyzed Hydrocarbon Traps,” SAE Int. J. Fuels Lubr. 2 1 485 496 2009
- Shelef M. McCabe R.W. “Twenty-five Years After Introduction of Automotive Catalysts: What Next?” Catal. Today 62 2000 35 50
- Edgerton M. “Increasing Crop Productivity to Meet Global Needs for Feed, Food, and Fuel,” Plant Physiol. 149 2009 7 13