Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Effect of Post Injections on In-Cylinder and Exhaust Soot for Low-Temperature Combustion in a Heavy-Duty Diesel Engine

Journal Article
2010-01-0612
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2010-01-0612
Published April 12, 2010 by SAE International in United States
Effect of Post Injections on In-Cylinder and Exhaust Soot for Low-Temperature Combustion in a Heavy-Duty Diesel Engine
Sector:
Citation: Bobba, M., Musculus, M., and Neel, W., "Effect of Post Injections on In-Cylinder and Exhaust Soot for Low-Temperature Combustion in a Heavy-Duty Diesel Engine," SAE Int. J. Engines 3(1):496-516, 2010, https://doi.org/10.4271/2010-01-0612.
Language: English

References

  1. Hardy, W.L. Reitz, R.D. “An Experimental Investigation of Partially Premixed Combustion Strategies Using Multiple Injections in a Heavy-Duty Diesel Engine,” SAE Technical Paper 2006-01-0917 SAE Transactions 115 3 514 531 2006
  2. Nehmer, D.A. Reitz, R.D. “Measurement of the Effect of Injection Rate and Split Injections on Diesel Engine Soot and NOx Emissions,” SAE Technical Paper 940668 SAE Transactions 103 3 1031 1041 1994
  3. Mendez, S. Thirouard, B. “Using Multiple Injection Strategies in Diesel Combustion: Potential to Improve Emissions, Noise and Fuel Economy Trade-Off in Low CR Engines,” SAE Int. J. Fuels Lubr. 1 1 662 674 2008
  4. Payri, F. Benajes, J. Pastor, J.V. Molina, S. “Influence of the Post-Injection Pattern on Performance, Soot and NOx Emissions in a HD Diesel Engine,” SAE Technical Paper 2002-01-0502 2002
  5. Husberg, T. Denbratt, I. Karlsson, A. “Analysis of Advanced Multiple Injection Strategies in a Heavy-Duty Diesel Engine using Optical Measurements and CFD-Simulations,” SAE Technical Paper 2008-01-1328 2008
  6. Dronniou, N. Lejeune, M. Balloul, I. Higelin, P. “Combination of High EGR Rates and Multiple Injection Strategies to Reduce Pollutant Emissions,” SAE Technical Paper 2005-01-3726 2005
  7. Tow, T.C. Pierpont, D.A. Reitz, R.D. “Reducing Particulate and NOx Emissions by Using Multiple Injections in a Heavy Duty D.I. Diesel Engine,” SAE Technical Paper 940897 SAE Transactions 103 3 1403 1417 1994
  8. Ojeda, W.D. Zoldak, P. Espinosa, R. Kumar, R. “Development of a Fuel Injection Strategy for Partially Premixed Compression Ignition Combustion,” SAE Int. J. Engines 2 1 1473 1488 2009
  9. Yamamoto, K. Takada, K. Kusaka, J. Kanno, Y. et al. “Influence of Diesel Post Injection Timing on HC Emissions and Catalytic Oxidation Performance,” SAE Technical Paper 2006-01-3442 2006
  10. Chen, S.K. “Simultaneous Reduction of NOx and Particulate Emissions by Using Multiple Injections in a Small Diesel Engine,” SAE Technical Paper 2000-01-3084 SAE Transactions 109 3 2127 2136 2000
  11. Hotta, Y. Inayoshi, M. Nakakita, K. Fujiwara, K. et al. “Achieving Lower Exhaust Emissions and Better Performance in an HSDI Diesel Engine with Multiple Injection,” SAE Technical Paper 2005-01-0928 SAE Transactions 114 3 883 898 2005
  12. Bruneaux, G. Maligne, D. “Study of Mixing and Combustion Processes of Consecutive Short Double Diesel Injections,” SAE Int. J. Engines 2 1 1151 1169 2009
  13. Han, Z. Uludogan, A. Hampson, G. J. Reitz, R.D. “Mechanism of Soot and NOx Emission Reduction Using Multiple-Injection in a Diesel Engine,” SAE Technical Paper 960633 SAE Transactions 105 3 837 852 1996
  14. Desantes, J. Arregle, J. Lopez, J. J. Garcia, A. “A Comprehensive Study of Diesel Combustion and Emissions with Post-Injection,” SAE Technical Paper 2007-01-0915 SAE Transactions 116 3 542 550 2007
  15. Dec, J. E. “A Conceptual Model of D.I. Diesel Combustion Based on Laser-Sheet Imaging,” SAE Technical Paper 970873 SAE Transactions 106 3 1319 1348 1997
  16. Musculus, M.P.B. Dec, J.E. Tree, D.R. “Effects of Fuel Parameters and Diffusion Flame Lift-Off on Soot Formation in a Heavy-Duty DI Diesel Engine,” SAE Technical Paper 2002-01-0889 SAE Transactions 111 3 1467 1489 2002
  17. Sjöberg, M. Dec, J.E. “An Investigation of the Relationship between Measured Intake Temperature, BDC Temperature, and Combustion Phasing for Premixed and DI HCCI Engines,” SAE Technical Paper 2004-01-1900 SAE Transactions 113 3 1271 1286 2004
  18. Heywood, J. B. Internal Combustion Engine Fundamentals McGraw-Hill, Inc. 1988
  19. Baratta, M. Catania, A. E. Ferrari, A. “Hydraulic Circuit Design Keys to Remove the Dependence of the Injected Fuel Amount on Dwell Time in Multi-Jet C. R. Systems,” ASME IC Engine Spring Conference 2006
  20. Helmantel, A. “Reduction in NOx Emissions from a Light Duty DI Diesel Engine in Medium Load Conditions with High EGR Rates,” SAE Technical Paper 2008-01-0643 2008
  21. Horibe, N. Ishiyama, T. “Relations among NOx, Pressure Rise Rate, HC and CO in LTC Operation of a Diesel Engine,” SAE Technical Paper 2009-01-1443 2009
  22. Mueller, C. J. Martin, G. C. “Effects of Oxygenated Compounds on Combustion and Soot Evolution in a DI Diesel Engine: Broadband Natural Luminosity Imaging,” SAE Technical Paper 2002-01-1631 SAE Transactions 111 4 518 527 2002
  23. Bobba, M.K. Genzale, C. Musculus, M. “Effect of Ignition Delay on In-Cylinder Soot Characteristics of a Heavy Duty Diesel Engine Operating at Low Temperature Conditions,” SAE Int. J. Engines 2 1 911 924 2009
  24. Akihama, K. Takatori, Y. Inagaki, K. Sasaki, S. et al. “Mechanism of the Smokeless Rich Diesel Combustion by Reducing Temperature,” SAE Technical Paper 2001-01-0655 SAE Transactions 110 3 648 662 2001
  25. Musculus, M.P.B. “On the Correlation between NOx Emissions and the Diesel Premixed Burn,” SAE Technical Paper 2004-01-1401 SAE Transactions 113 4 631 651 2004
  26. Desantes, J.M. Payri, R. Salvador, F.J. Gimeno, J. “Measurements of Spray Momentum for the Study of Cavitation in Diesel Injection Nozzles,” SAE Technical Paper 2003-01-0703 2003

Cited By

Recommended Content

Technical Paper A Study of Particulate Formation on the Combustion Chamber Wall
Journal Article Effect of Mesh Structure in the KIVA-4 Code with a Less Mesh Dependent Spray Model for DI Diesel Engine Simulations
Technical Paper Effects of Droplet Behaviors on Fuel Adhesion of Flat Wall Impinging Spray Injected by a DISI Injector