Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Spray Characterization of Ethanol Gasoline Blends and Comparison to a CFD Model for a Gasoline Direct Injector

Journal Article
2010-01-0601
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2010-01-0601
Published April 12, 2010 by SAE International in United States
Spray Characterization of Ethanol Gasoline Blends and Comparison to a CFD Model for a Gasoline Direct Injector
Sector:
Citation: Matsumoto, A., Moore, W., Lai, M., Zheng, Y. et al., "Spray Characterization of Ethanol Gasoline Blends and Comparison to a CFD Model for a Gasoline Direct Injector," SAE Int. J. Engines 3(1):402-425, 2010, https://doi.org/10.4271/2010-01-0601.
Language: English

References

  1. Christie, M.J. Fortino, N. Yilmaz, H. “Parameter Optimization of a Turbo Charged Direct Injection Flex Fuel SI Engine,” SAE Int. J. Engines 2 1 123 133 2009
  2. Kapus, P.E. Fuerhapter, A. Fuchs, H. Fraidl, G.K. “Ethanol Direct Injection on Turbocharged SI Engines - Potential and Challenges,” SAE Technical Paper 2007-01-1408 2007
  3. Marriott, C.D. Wiles, M.A. Gwidt, J.M. Parrish, S.E. “Development of a Naturally Aspirated Spark Ignition Direct-Injection Flex-Fuel Engine,” SAE Int. J. Engines 1 1 267 295 2008
  4. Hung, D.L.S. Zhu, G.G. Winkelman, J.R. Stuecken, T. et al. “A High Speed Flow Visualization Study of Fuel Spray Pattern Effect on Mixture Formation in a Low Pressure Direct Injection Gasoline Engine,” SAE Technical Paper 2007-01-1411 2007
  5. Yamamoto, S. Tanaka, D. Sato, K. Yokoe, M. “Keys to Understanding Spray-guided Combustion of a Narrow-spacing Gasoline Direct Injection SI Engine with a Centrally Mounted Multi-hole Injector,” SAE Int. J. Engines 2 1 1408 1419 2009
  6. Gold, M. Li, G. Sapsford, S. Stokes, J. “Application of Optical Techniques to the Study of Mixture Preparation in Direct Injection Gasoline Engines and Validation of a CFD Model,” SAE Technical Paper 2000-01-0538 2000
  7. Zhao, F. Lai M.-C. Harrington D.L. Automotive spark-ignited direct-injection gasoline engines Progress in Energy and Combustion Science 1999 25 437 562
  8. Andersson, M. Wärnberg J. Application of laser-induced fluorescence for imaging sprays of model fuels emulating gasoline and gasoline/ethanol blends ICLASS 2009, 11th Triennial International Annual Conference on Liquid Atomization and Spray Systems 2009
  9. Taniguchi, S. Yoshida, K. Tsukasaki, Y. “Feasibility Study of Ethanol Applications to A Direct Injection Gasoline Engine,” SAE Technical Paper 2007-01-2037 2007
  10. Wallner, T. Miers, S.A. “Combustion Behavior of Gasoline and Gasoline/Ethanol Blends in a Modern Direct-Injection 4-Cylinder Engine,” SAE Technical Paper 2008-01-0077 2008
  11. Zhao, F.-Q. Yoo, J.-H. Liu, Y. Lai, M.-Ch. “Spray Dynamics of High Pressure Fuel Injectors for DI Gasoline Engines,” SAE Technical Paper 961925 1996
  12. Honda, T. Kawamoto, M. Katashiba, H. Sumida, M. et al. “A Study of Mixture Formation and Combustion for Spray Guided DISI,” SAE Technical Paper 2004-01-0046 2004
  13. Mitroglou, N. Nouri, J.M. Yan, Y. Gavaises, M. et al. “Spray Structure Generated by Multi-Hole Injectors for Gasoline Direct-Injection Engines,” SAE Technical Paper 2007-01-1417 2007
  14. Park, J.S. et al. Visualization and Measurement of a Narrow-Cone DI Gasoline Spray for the Impingement Analysis International Journal of Automotive Technology 2004 5 221 238
  15. Pickett, L.M. Kook, S. Williams, T.C. “Visualization of Diesel Spray Penetration, Cool-Flame, Ignition, High-Temperature Combustion, and Soot Formation Using High-Speed Imaging,” SAE Int. J. Engines 2 1 439 459 2009
  16. Arnaud, E. et al. A Fluid Motion Estimator for Schlieren Image Velocimetry . ECCV 2006 Lecture Notes in Computer Science 2006 3951 198 210
  17. Pastor, J.V. Garcia, J.M. Pastor, J.M. Zapata, L.D. “Evaporating Diesel Spray Visualization using a Double-pass Shadowgraphy/Schlieren imaging,” SAE Technical Paper 2007-24-0026 2007
  18. Hori, T. Senda, J. Kuge, T. Fujimoto, H.G. “Large Eddy Simulation of Non-Evaporative and Evaporative Diesel Spray in Constant Volume Vessel by Use of KIVALES,” SAE Technical Paper 2006-01-3334 2006
  19. Yi, Y. DeMinco, C.M. “Numerical Investigation of Mixture Preparation in a GDI Engine,” SAE Technical Paper 2006-01-3375 2006
  20. Weber, J. Peters, N. Pawlowski, A. Kneer, R. et al. “Diesel Spray Characterization Using a Micro-Genetic Algorithm and Optical Measurements,” SAE Technical Paper 2006-01-1115 2006
  21. Joh, M. Huh, K.Y. Yoo, J.-H. Lai, M.-C. “Numerical Prediction and Validation of Fuel Spray Behavior in a Gasoline Direct-Injection Engine,” SAE Technical Paper 2001-01-3668 2001
  22. O'Rourke, P.J. Amsden, A.A. “The TAB Method for Numerical Calculation of Spray Droplet Breakup,” SAE Technical Paper 872089 1987
  23. Ricart, L.M. Reitz R.D. Deck J. Comparisons of Diesel Spray Liquid Penetration and Vapor Fuel Distribution With In-Cylinder Optical Measurements Transactions of the ASME 2000 122 588 595
  24. Weber, J. Spiekermann, P. Peters, N. “Model Calibration for Spray Penetration and Mixture Formation in a High Pressure Fuel Spray Using a Micro-Genetic Algorithm and Optical Data,” SAE Technical Paper 2005-01-2099 2005
  25. Park, S.H. et al. A study on the fuel injection and atomization characteristics of soybean oil methyl ester (SME) International Journal of Heat and Fluid Flow 2009 30 108 116
  26. Reitz, R.D. Modeling Atomization Processes in High-Pressure Vaporizing Sprays Atomization and Spray Technology 1987 3
  27. Schmidt, D.P. Rutland C.J. A New Droplet Collision Algorithm Journal of Computational Physics 2000 164
  28. Richards, K.J. Senecal P.K. Pomraning E. CONVERGE™ (Version 1.3) 2008 Middleton, WI Convergent Science, Inc.
  29. Liu, A.B. Mather, D. Reitz, R.D. “Modeling the Effects of Drop Drag and Breakup on Fuel Sprays,” SAE Technical Paper 930072 1993
  30. Han, Z. Reitz R.D. Turbulence Modeling of Internal Combustion Engines Using RNG k -e Models Combust. Sci. and Tech 1995 106
  31. Reitz, R.D. Bracco F.V. Mechanisms of Breakup of Round Liquid Jets Encyclopedia of Fluid Mechanics 1986 Houston, TX Gulf Pub.
  32. Xin, J. Ricart L. Reitz R.D. Computer Modeling of Diesel Spray Atomization and Combustion Combust. Sci. and Tech. 1998 137
  33. Serras-Pereira, J. Aleiferis, P.G. Richardson, D. Wallace, S. “Spray Development in a Direct-Injection Spark-Ignition Engine,” SAE Technical Paper 2007-01-2712 2007
  34. Hattori, H. Narumiya, K. Tsue, M. Kadota, T. “Analysis of Initial Breakup Mechanism of Diesel Spray Injected into High-Pressure Ambience,” SAE Technical Paper 2004-01-0528 2004
  35. Gold, M. Stokes, J. Morgan, R. Heikal, M. et al. “Air-Fuel Mixing in a Homogeneous Charge DI Gasoline Engine,” SAE Technical Paper 2001-01-0968 2001
  36. Wada, Y. Nishimura, Y. Yamaguchi, A. Magara, N. et al. “Controlling PCCI Combustion with Mixed Fuel - Application of Flashing Spray to Early Injection,” SAE Technical Paper 2007-01-0624 2007
  37. van Romunde, Z. Aleiferis, P.G. Cracknett, R.F. Walmsley, H.L. “Effect of Fuel Properties on Spray Development from a Multi-Hole DISI Engine Injector,” SAE Technical Paper 2007-01-4032 2007
  38. Mojtabi, M. et al. The Effect of Flash Boiling on Breakup and Atomisation in GDI Sprays 2008
  39. National Institute of Standards and Technology 2008 http://webbook.nist.gov
  40. Hiroyasu, H. Arai, M. “Structures of Fuel Spray in Diesel Engines,” SAE Technical Paper 900475 1990

Cited By

Recommended Content

Technical Paper Experimental Investigation of the Internal Flow Field of a Model Gasoline Injector Using Micro-Particle Image Velocimetry
Technical Paper Investigations on Gasoline Spray Propagation Behaviour Characteristic for Multihole Injectors
Journal Article A Numerical Model for Flash Boiling of Gasoline-Ethanol Blends in Fuel Injector Nozzles