This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Development of the Combustion System for a Flexible Fuel Turbocharged Direct Injection Engine

Journal Article
2010-01-0585
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 12, 2010 by SAE International in United States
Development of the Combustion System for a Flexible Fuel Turbocharged Direct Injection Engine
Sector:
Citation: Whitaker, P., Shen, Y., Spanner, C., Fuchs, H. et al., "Development of the Combustion System for a Flexible Fuel Turbocharged Direct Injection Engine," SAE Int. J. Engines 3(1):326-354, 2010, https://doi.org/10.4271/2010-01-0585.
Language: English

References

  1. Zhao, F. Harrington, D.L. Lai, M.D. “Automotive Gasoline Direct-Injection Engines,” SAE International Warrendale, PA 978-0-7680-0882-1 2002
  2. Van Basshuysen, R. Gasoline Engine with Direct Injection Vieweg+Teubner | GWV Fachverlage GmbH Wiesbaden 2009
  3. Ikoma, T. Abe, S. Sonoda, Y. Suzuki, H. et al. “Development of V-6 3.5-liter Engine Adopting New Direct Injection System,” SAE Technical Paper 2006-01-1259 2006
  4. Marriott, C.D. Wiles, M.A. Gwidt, J.M. Parrish, S.E. “Development of a Naturally Aspirated Spark Ignition Direction-Injection Flex-Fuel Engine,” SAE Int. J. Engines 1 1 267 295 2008
  5. Yang, J. Kenney, T. “Some Concepts of DISI Engine for High Fuel Efficiency and Low Emissions,” SAE Technical Paper 2002-01-2747 2002
  6. VanDerWege, B.A. Han, Z. Lyer, C.O. Muñoz, R.H. et al. “Development and Analysis of a Spray-Guided DISI Combustion System Concept,” SAE Technical Paper 2003-01-3105 2003
  7. Stein, R.A. House, C.J. Leone, T.G. “Optimal Use of E85 in a Turbocharged Direct Injection Engine,” SAE Int. J. Fuels Lubr. 2 1 670 682 2009
  8. Hadler, J. Szengel, R. Middendorf, H et al. “Minimum Consumption - Maximum Force: TSI Technology in the New 1.2L Engine from Volkswagen,” 30. Internationales Wiener Motorensymposium 2009
  9. Honda, T. Kawamoto, M. Katashiba, H. Sumida, M. et al. “A Study of Mixture Formation and Combustion for Spray Guided DISI,” SAE Technical Paper 2004-01-0046 2004
  10. Bandel, W. Fraidl, G.K. Kapus, P.E. Sikinger, H. et al. “The Turbocharged GDI Engine: Boosted Synergies for High Fuel Economy Plus Ultra-Low Emissions,” SAE Technical Paper 2006-01-1266 2006
  11. Fraidl, G.K. Kapus, P.E. Prevedel, K. Fürhapter, A. “GDI Turbo: The Next Step,” 28. Wiener Motorensymposium 2007
  12. Fuchs, H. Hopfner, W. Kapus, P. Winklhofer, E. “Methods and Criteria for Fuel Injector Integration in Boosted Gasoline Direct Injection Engines,” IMechE: Injection Systems for IC Engines London 2009
  13. Lang, O. Habermann, K. Krebber-Hortmann, K. Sehr, A. et al. “Potential of the Spray-guided Combustion System in Combination with Turbocharging,” SAE Technical Paper 2008-01-0139 2008
  14. Alger, T. Chauvet, T. Dimitrova, Z. “Synergies between High EGR Operation and GDI Systems,” SAE Int. J. Engines 1 1 101 114 2008
  15. Kulzer, A. Christ, A. Rauscher, M. Sauer, C. et al. “Thermodynamic Analysis and Benchmark of Various Gasoline Combustion Concepts,” SAE Technical Paper 2006-01-0231 2006
  16. Zhang, Y. He, B.-Q. Xie, H. Zhao, H. “The Combustion and Emission Characteristics of Ethanol on a Port Fuel Injection HCCI Engine,” SAE Technical Paper 2006-01-0631 2006
  17. Nakata, K. Utsumi, S. Ota, A. Kawatake, K. et al. “The Effect of Ethanol Fuel on a Spark Ignition Engine,” SAE Technical Paper 2006-01-3380 2006
  18. Gnanam, G. Sobiesiak, A. Reader, G. Zhang, C. “An HCCI Engine Fuelled with Iso-octane and Ethanol,” SAE Technical Paper 2006-01-3246 2006
  19. Cohn, D.R. Bromberg, L. Heywood, J.B. “Direct Injection Ethanol Boosted Gasoline Engines: Biofuel Leveraging For Cost Effective Reduction of Oil Dependence and CO2 Emissions,” MIT 2005
  20. Kapus, P.E. Füerhapter, A. Fuchs, H. Fraidl G.K. “Ethanol Direct Injection on Turbocharged SI Engines - Potential and Challenges,” SAE Technical Paper 2007-01-1408 2007
  21. Hirooka, H. Mori, S. Shimizu, R. “Effects of High Turbulence Flow on Knock Characteristics,” SAE Technical Paper 2004-01-0977 2004
  22. Lumley, J.L. Engines: An Introduction Cambridge University Press 1999
  23. Glanz, R. “Differential Measurement of Tumble Flows,” MTZ Worldwide January 2000
  24. Anderson, M.K. Assanis, D.N. Filipi, Z.S. “First and Second Law Analyses of a Naturally-Aspirated, Miller Cycle, SI Engine with Late Intake Valve Closure,” SAE Technical Paper 980889 1998

Cited By