Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Experimental and Numerical Evaluation of Diesel Spray Momentum Flux

Journal Article
2009-01-2772
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2009-01-2772
Published November 02, 2009 by SAE International in United States
Experimental and Numerical Evaluation of Diesel Spray Momentum Flux
Sector:
Citation: Postrioti, L., Mariani, F., Battistoni, M., and Mariani, A., "Experimental and Numerical Evaluation of Diesel Spray Momentum Flux," SAE Int. J. Engines 2(2):287-299, 2010, https://doi.org/10.4271/2009-01-2772.
Language: English

References

  1. Pierpont D.A. Reitz, R.D. Effects of Injection Pressure and Nozzle Geometry on Dl Diesel Emission and Performance SAE Paper 950604 1996
  2. Heywood, J. B. “ Internal Combustion Engine Fundamentals” ” McGraw-Hill Book Co., New York 1988
  3. Winter J. Dittus B. Kerst A. Muck O. Schulz R. Vogel A. “ Nozzle Hole Geometry - a Powerful Instrument for Advanced Spray Design" ” THIESEL International Conference on Thermo-and Fluid Dynamics Processes in Diesel Engines 2004
  4. Mahar B. “ Future and Potential of Diesel Injection System” ” Thermo-and Fluid Dynamic Processes in Diesel Engines 2: selected papers Whitelaw, J.H. Payri, F. Arcoumanis C. Desantes, J.M.
  5. Rajaratnam N. Turbulent Jets Amsterdam, Elsevier 1974
  6. Payri R. Garcia J.M. Salvador F.J. Gimeno J. Using Spray Momentum Flux Measurements to Understand the Influence of Diesel Nozzle Geometry on Spray Characteristics Fuel; 84 551 561 2005
  7. Desantes J. M. Payri R. Salvador F. J. Gimeno J. “Measurements of Spray Momentum for the Study of Cavitation in Diesel Injection Nozzles” SAE-Paper 2003-01-0703 2003
  8. Payri R. Ruiz S. Salvador F. J. Gimeno J. On the dependence of spray momentum flux in spray penetration: Momentum flux packets penetration model Journal of mechanical science and technology ISSN 1738-494X 2007 21 1100 1111
  9. Desantes J. M. Payri R. Salvador F. J. Gimeno J. Prediction of Spray Penetration by Means of Spray Momentum Flux SAE-Paper 2006-01-1387
  10. Kampmann S. Dittus B. Mattes P. Kirner M. The Influence of Hydro Grinding at VCO Nozzles on the Mixture Preparation in a Dl Diesel Engine SAE Paper 960867 1996
  11. Postrioti L. Grimaldi C.N. Ceccobello M. Di Gioia R. “ Diesel Common Rail System Behavior with Different Fuels” ” SAE-Paper 2004-01-0029 2004
  12. Ubertini S. Mariani F. Postrioti L “ Experimental Validation of Spray Breakup and Fuel Evaporation Models in High Pressure Ambient Conditions” ” Thermo-and Fluid Dynamic Processes in Diesel Engines 2: selected papers Whitelaw, J.H. Payri, F. Arcoumanis C. Desantes, J.M. Springer : 3-540-202187-4; 61 85 2004
  13. Cavalletti M. Mariani F. “ 3-D Spray Simulation of a High-Pressure Diesel Injection System: Experimental Validation of CFD Models” ” Procedings of the 9° High-Tech Cars and Engines International Conference, Modena (Italy), 29-30 Maggio 2003
  14. Badami M. Millo F. Postrioti L Mallamo F. Pinzello A. Mariani F. “ Experimental and Numerical Analysis of Diesel Common Rail Fuel Sprays in an Air Quiscent Vessel ” THIESEL International Conference on Thermo-and Fluid Dynamics Processes in Diesel Engines 2006
  15. Rölle, T. “Injection Discharge-rate-Curve Indicator (EVI-IAV)"” 1996
  16. Ishikawa S. Ohmori Y. Fukushima S. Suzuki T. Takamura A. Kamimoto T. 2000 “ Measurement of Rate of Multiple Injection in CDI Engines” ” SAE Paper 2000-01-1257
  17. Postrioti L. Ubertini S. An integrated experimental-numerical study of HSDI Diesel injection system and spray dynamics SAE Paper 2006-01-1389 2006
  18. Postrioti L. “Sviluppo di un Apparato per la Misura della Portata Istantanea di Sistemi di Iniezione Diesel” MisMac IX Congress 2006
  19. Grimaldi C. N. Postrioti L 2000 “ Experimental Comparison between Conventional and Bio-derived Fuels Sprays from a Common Rail Injection System” ” SAE Paper 2000-01-1252 . SAE 2000 Transactions Journal of Engines, Section 3, Vol 109
  20. 2005
  21. Dukowicz J. K. A Particle-fluid numerical modes for liquid sprays J. Comp. Physics, 35 229 253 1980
  22. Gosman A.D. loannides S.I. 'Aspects of computer simulation of liquid-fuelled combustors' AIAA, J. Energy 7 482 490 1983
  23. Reitz R.D. Diwakar R. 'Effect of drop breakup on fuel sprays' SAE Technical Paper Series 860469 1986
  24. Obermeier F. 'Modeling of nozzle-flow' IDEA Project, Subprogram A1 1991
  25. Bai C. Gosman A.D. 'Development of methodology for spray impingement simulation' SAE Technical Paper Series 950283 1995

Cited By

Recommended Content

Technical Paper Multi-Dimensional Wave Propagation in Pipe Junctions
Technical Paper Modeling of Pressure Wave Reflection from Open-Ends in I.C.E. Duct Systems
Technical Paper CFD Analysis of Air Intake System with Negative Pressure on Intake Grill