Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Applications of CFD Modeling in GDI Engine Piston Optimization

Journal Article
2009-01-1936
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2009-01-1936
Published June 15, 2009 by SAE International in United States
Applications of CFD Modeling in GDI Engine Piston Optimization
Sector:
Citation: Xu, Z., Yi, J., Curtis, E., and Wooldridge, S., "Applications of CFD Modeling in GDI Engine Piston Optimization," SAE Int. J. Engines 2(1):1749-1763, 2009, https://doi.org/10.4271/2009-01-1936.
Language: English

References

  1. Han Z. Yi J. Trigui N. Stratified Mixture Formation and Piston Wetting in a DISI Engine SAE 2002-01-2655
  2. Yi J. Han Z. Trigui N. Fuel-Air Mixing Homogeneity and Performance Improvements of a Stratified-Charge DISI Combustion System SAE 2002-01-2656
  3. Han Z. Weaver C. Wooldridge S. Alger T. Hilditch J. Mcgee J. Westrate B. Xu Z. Yi J. Chen X. Trigui N. Davis G. Development of a New Light Stratified-Charge Combustion System for a Family of Engines with Upfront CFD Coupling with Thermal and Optical Engine Experiments SAE- 2004-01-0545
  4. Yi J. Han Z. Xu Z. Stanley L. Combustion Improvement of a Light Stratified-Charge Direct Injection Engine SAE- 2004-01-0546
  5. Amsden, A.A. “KIVA-3V: A Block-Structured KIVA Program for Engines with Vertical or Canted Valves” Los Alamos National Laboratory Report LA-13313-MS 1997
  6. Amsden, A.A. “KIVA-3V, Release 2: Improvements to KIVA-3V” Los Alamos National Laboratory Report LA-13608-MS 1999
  7. Yi, J. Han, Z. A Methodology of Rapid Mesh Generation and Dynamic Mesh Management with Moving Valves for Engine CFD 2001
  8. Han Z. Xu Z. Trigui N. Spray/Wall Interaction Models for Multidimensional Engine Simulation International Journal of Engine Research 1 127 146 2000
  9. Han Z. Xu Z. Wooldridge S. Yi J. Lavoie G. Modeling of DISI Engine Sprays with Comparison to Experimental In-Cylinder Spray Images 2001 SAE 2001-01-3667
  10. Han Z. Xu Z. Wall Film Dynamics Modeling for Impinging Sprays in Engines SAE 2004-01-0099
  11. Yong Y. Reitz R.D. Modeling the Effect of Primary Atomization on Diesel Engine Emissions SAE 2003-01-1041
  12. Yi J. Wooldridge S. Modeling of Multi-hole Gasoline Injector Spray Ford Research-SRR-2006-0076
  13. Yi, J. Wooldridge, S. Coulson, G. Hilditch, J. et al. "Development and Optimization of the Ford 3.5L V6 EcoBoost Engine," SAE Int. J. Engines 2 1 1388 1407 2009
  14. Xu, Z. Yi, J. Wooldridge, S. Reiche, D. et al. "Modeling the Cold Start of the Ford 3.5L V6 EcoBoost Engine," SAE Int. J. Engines 2 1 1367 1387 2009
  15. Iyer C. Yi J. 3D CFD Upfront Optimization of the In-Cylinder Flow of the 3.5L V6 EcoBoost Engine SAE 2009-01-1492
  16. Lippert, A. M. Reitz R. D. Modeling of Multicomponent fuels Using Continuous Distributions with Application to Droplet Evaporation and Sprays SAE Paper 972282
  17. Zeng, Y. Lee, C. F. A Multicomponent Droplet Preferential Vaporization Model for Spray Computations, Atomization and Spray 12 1 163 186 2002
  18. Wang D. Lee Q. F. Zeng Y. Modeling of Fuel Air Mixing in a Stratified Gasoline Direct Injection Engine Using Multicomponent Representation SAE 2003-01-0067
  19. Zeng Y. Lee C. F. A Multicomponent Fuel Film Vaporization Model for Multidimensional Computations Journal of Propulsion and Power 15 6 964 973 1999
  20. Zeng Y. Modeling of Multicomponent Fuel Vaporization in Internal Combustion Engines Ph.D. Dissertation University of Illinois at Urbana-Champaign
  21. Greenfield M. Lavoie G. Smith C. Curtis E. Macrospic Model of the D86 Fuel Volatility Procedure SAE Paper 982724
  22. Curtis E. Russ S. Aquino C. Lavoie G. Trigui N. The Effect of Injector Targeting and Fuel Volatility on Fuel Dynamics in a PFI Engine During Warm-up: Part II-Modeling Results SAE Paper 982519

Cited By

Recommended Content

Journal Article CFD Simulation of Oil Jets for Piston Cooling Applications Comparing the Level Set and the Volume of Fluid Method
Technical Paper An Extension of the Dynamic Mesh Handling with Topological Changes for LES of ICE in OpenFOAM ®
Technical Paper Multi-Objective Tolerance Optimization Considering Friction Loss for Internal Combustion Engines