This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Dynamic Modeling of HCCI Combustion Timing in Transient Fueling Operation
Journal Article
2009-01-1136
ISSN: 1946-3936, e-ISSN: 1946-3944
Sector:
Topic:
Citation:
Shahbakhti, M. and Koch, C., "Dynamic Modeling of HCCI Combustion Timing in Transient Fueling Operation," SAE Int. J. Engines 2(1):1098-1113, 2009, https://doi.org/10.4271/2009-01-1136.
Language:
English
References
- Kalghatgi G. T. Head R. A. “Combustion Limits and Efficiency in a Homogeneous Charge Compression Ignition Engine” Int. Journal of Engine Research 7 215 236 2006
- Shahbakhti M. Lupul R. Koch C. R. “Cyclic Variations of Ignition Timing in an HCCI Engine” Proceeding of ASME/IEEE Joint Rail Conference & Internal Combustion Engine Spring Technical Conference 2007
- Serinyel Z. Le Moyne L. Guibert P. “Homogeneous Charge Compression Ignition as an Alternative Combustion Mode for the Future of Internal Combustion Engines” International Journal of Vehicle Design 44 1-2 20 40 2007
- Sjoberg M. Dec J. E. Babajimopoulos A. Assanis D. “Comparing Enhanced Natural Thermal Stratification Against Retarded Combustion Phasing for Smoothing of HCCI Heat-Release Rates” SAE Paper No. 2004-01-2994 2004
- Olsson J. Tunestål P. Johansson B. Fiveland S. Agama R. Willi M. Assanis D. “Compression Ratio Influence on Maximum Load of a Natural Gas Fueled HCCI Engine” SAE Paper No. 2002-01-0111 2002
- Iverson R. J. Herold R. E. Augusta R. Foster D. E. Ghandhi J. B. Eng J. A. Najt P. M. “The Effects of Intake Charge Preheating in a Gasoline-Fueled HCCI Engine” SAE Paper No. 2005-01-3742 2005
- Johansson B. “Homogeneous Charge Compression Ignition: The Future of IC Engines?” International Journal of Vehicle Design 44 1-2 1 19 2007
- Lu X. Chen W. Hou Y Huang Z. “Study on the Ignition, Combustion and Emissions of HCCI Combustion Engines Fueled With Primary Reference Fuels” SAE Paper No. 2005-01-0155 2005
- Yao M. Zheng Z. Zhang B. Chen Z. “The Effect of PRF Fuel Octane Number on HCCI Operation” SAE Paper No. 2004-01-2992 2004
- Shahbakhti M. Koch C. R. “Characterizing the Cyclic Variability of Ignition Timing in an HCCI Engine Fueled with n-Heptane/iso-Octane Blend Fuels” International Journal of Engine Research 9 361 397 2008
- Sjöberg M. Dec J. E. “Comparing Late-Cycle Autoignition Stability for Single- and Two-Stage Ignition Fuels in HCCI Engines” Proceedings of the Combustion Institute 31 2895 2902 2007
- Bengtsson J. Strandh P. Johansson R. Tunestål P. Johansson B. “Hybrid Modelling Of Homogeneous Charge Compression Ignition (HCCI) Engine Dynamics - A Survey” International Journal of Control 80 1814 1847 2007
- Law D. Kemp D. Allen J. Kirkpatrick G. Copland T. “Controlled Combustion in an IC-Engine with a Fully Variable Valve Train” SAE Paper No. 2000-01-0251 2000
- Haraldsson G. Tunestål P. Johansson B. Hyvonen J. “HCCI combustion phasing with closed-loop combustion control using variable compression ratio in a multi-cylinder engine” SAE Paper No. 2003-01-1830 2003
- Gérard D. Besson M. Hardy J. P. Croguennec S. Thomine M. Aoyama S. Tomita M. “HCCI Combustion on a Diesel VCR Engine” SAE Paper No. 2008-01-1187 2008
- Olsson J. Tunestål P. Johansson B. “Closed-Loop Control of an HCCI Engine” SAE Paper No. 2001-01-1031 2001
- Kamio J. Kurotani T. Sato T. Kiyohiro Y. Hashimoto K. Gunji T. “A Study on Combustion Control by Dual-Fuel Strategies” SAE Paper No. 2007-08-0242 2007
- Canova M. Garzarella L. Ghisolfi M. Mohler S. M. Guezennec Y Rizzoni G. “A Control-Oriented Mean-Value Model for HCCI Diesel Engines with External Mixture Formation” Proceedings of IMECE2005, ASME International Mechanical Engineering Congress 2005
- Shaver G. M. Gerdes J. C. Roelle M. J. Caton P. A. Edwards C. F. “Dynamic Modeling of Residual-Affected Homogeneous Charge Compression Ignition Engines with Variable Valve Actuation” ASME Journal of Dynamic Systems, Measurement and Control 127 374 381 2005
- Yasar H. Soyhan H. S. Walmsley H. Head B. Sorusbay C. “Double-Wiebe Function: an Approach for Single-Zone HCCI Engine Modeling” Applied Thermal Engineering 28 11-12 1284 90 2008
- Halstead M. Kirsch L. Keck J. “The Autoignition of Hydrocarbon Fuels at High Temperatures and Pressures-Fitting of a Mathematical Model” Combustion and Flame 30 45 60 1977
- Bengtsson J. Gafvert M. Strandh P. “Modeling of HCCI Engine Combustion for Control Analysis” Proceeding of IEEE conference on decision and control 1682 1687 2004
- Karagiorgis S. Collings N. Glover K. Petridis T. “Dynamic Modeling of Combustion and Gas Exchange Processes for Controlled Auto-Ignition Engines” Proceeding of the 2006 American Control Conference Minneapolis, Minnesota, USA June 14-16, 2006
- Shaver G. M. Roelle M. J. Caton P. A. Kaahaaina N. B. Ravi N. Hathout J. Ahmed J. Kojic A. Park S. Edwards C. F. Gerdes J. C. “A Physics-Based Approach to the Control of Homogeneous Charge Compression Ignition Engines with Variable Valve Actuation” International Journal of Engine Research 6 361 375 2005
- Rausen D. J. Stefanopoulou A. G. Kang J-M. Eng J. A. Kuo W. “A Mean-Value Model for Control of Homogeneous Charge Compression Ignition (HCCI) Engines” Proceeding of American Control Conference 125 131 2004
- Livengood J. C. Wu P. C. “Correlation of Autoignition Phenomena in Internal Combustion Engines and Rapid Compression Machines” Fifth Symposium (International) on Combustion 347 356 1955
- Agrell F. Angstrom H. E. Eriksson B. Wikander J. Linderyd J. “Integrated Simulation and Engine Test of Closed Loop HCCI Control by Aid of Variable Valve Timings” SAE Paper No. 2003-01-0748 2003
- Ohyama Y. “Engine Control Using a Real-Time Combustion Model” SAE paper No. 2001-01-0256 2001
- Iida M. Aroonsrisopon T. Hayashi M. Foster D. Martin J. “The Effect of Intake Air Temperature, Compression Ratio and Coolant Temperature on the Start of Heat Release in an HCCI Engine” SAE Paper No. 2001-01-1880 2001
- Swan K. Shahbakhti M. Koch C. R. “Predicting Start of Combustion Using a Modified Knock Integral Method for an HCCI Engine” SAE Paper No. 2006-01-1086 2006
- Souder J. S. Mehresh P. Hedrick J. K. Dibble R. W. “A Multi-Cylinder HCCI Engine Model for Control” Proceedings of IMECE2004 307 316 2004
- Ohyama Y “Engine Control Using Combustion Model” SAE paper No. 2000-01-0198 2000
- Shaver G. M. Roelle M. J. Gerdes J. C. “Modeling Cycle to Cycle Dynamics and Mode Transition in HCCI Engines with Variable Valve Actuation” Journal of Control Engineering Practice 14 213 222 2006
- Chiang C. J. Stefanopoulou A. G. “Stability Analysis in Homogeneous Charge Compression Ignition (HCCI) Engines With High Dilution” IEEE Transactions on Control Systems Technology 15 209 219 2007
- Killingsworthy N. J. Acevesz S. M. Flowersz D. L. Krsti M. “A Simple HCCI Engine Model for Control” IEEE International Conference on Control Applications 2006
- Jia N. Wang J. Nuttall K. Wei J. Xu H. Wyszynski M. L. Qiao J. Richardson M. J. “HCCI Engine Modeling for Real-Time Implementation and Control Development” IEEE/ASME Transactions on Mechatronics 12 6 581 9 2007
- Pfeiffer R. Haraldsson G. Olsson J. O. Tunestål P. Johansson R. Johansson B. “System Identification and LQG Control of Variable-Compression HCCI Engine Dynamics” Proceeding of IEEE International Conference on Control Applications 1442 1447 2004
- Audet A. “Closed Loop Control of HCCI Using Camshaft Phasing and Dual Fuels” M.Sc. thesis University of Alberta 2008
- Wagner R. M. Edwards K. D. Daw C. S. Green J. B. Jr. Bunting B. G. “On the Nature of Cyclic Dispersion in Spark Assisted HCCI Combustion” SAE Paper No. 2006-01-0418 2006
- Daw C. S. Wagner R. M. Edwards K. D. Green J. B. Jr “Understanding the Transition Between Conventional Spark-Ignited Combustion and HCCI in a Gasoline Engine” Proceedings of the Combustion Institute 31 2887 2894 2007
- Shahbakhti M. Lupul R. Koch C. R. “Predicting HCCI Auto-Ignition Timing by Extending a Modified Knock-Integral Method” SAE Paper No. 2007-01-0222 2007
- Shahbakhti M. Koch C. R. “Control Oriented Modeling of Combustion Phasing for an HCCI Engine” Proceeding of American Control Conference 2007
- Bengtsson J. Strandh P. Johansson R. Tunestål P. Johansson B. “Closed-Loop Combustion Control Of Homogeneous Charge Compression Ignition (HCCI) Engine Dynamics” International Journal of Adaptive Control and Signal Processing 18 167 179 2004
- Bengtsson J. Strandh P. Johansson R. Tunestål P. Johansson B. “Hybrid Control Of Homogeneous Charge Compression Ignition (HCCI) Engine Dynamics” International Journal of Control 79 422 448 2006
- Tanaka S. Ayala F. Keck J. C. Heywood J. B. “Two-stage Ignition in HCCI Combustion and HCCI Control by Fuels and Additives” Journal of Combustion and Flame 132 219 239 2003
- Checkel M. D. Dale J. D. “Computerized Knock Detection from Engine Pressure Records” SAE Paper No. 860028 1986
- Kirchen P. Shahbakhti M. Koch C. R. “A Skeletal Kinetic Mechanism for PRF Combustion in HCCI Engines” Journal of Combustion Science and Technology 179 1059 1083 2007
- Rassweiler G. M. Withrow L. “Motion Pictures of Engine Flames Correlated with Pressure Cards” SAE Transactions 42 185 204 1938
- Shahbakhti M. Lupul R. Koch C. R. “Sensitivity Analysis and Modeling of HCCI Auto-Ignition Timing” Proceeding of the Fifth IFAC Symposium on Advances in Automotive Control 303 310 2007
- Sjöberg M. Dec J. E. “An Investigation of the Relationship Between Measured Intake Temperature, BDC Temperature, and Combustion Phasing for Pre-mixed and Dl HCCI Engines” SAE Paper No. 2004-01-1900 2004
- Cavina N. Siviero C. Suglia C. “Residual Gas Fraction Estimation: Application to a GDI Engine With Variable Valve Timing and EGR” SAE Paper No. 2004-01-2943 2004
- Burcat A. “Third Millenium Ideal Gas and Condensed Phase Thermochemical Database for Combustion” Technical Report TAE 867 Faculty of Aerospace Engineering, Israel Institute of Technology January 2001 ftp.technion.ac.il/pub/supported/aetdd/thermodynamics
- Heywood J. B. “Internal Combustion Engine Fundamentals”. McGraw-Hill New York 1988
- Nelder J. A. Mead R. “A Simplex Method for Function Minimization” Computer Journal 308 313 1965
- Turns S. R. “An Introduction to Combustion: Concepts and Applications”. McGraw-Hill 2nd 2000
- Chang J. Guralp O. Filipi Z. Assanis D. Kuo T. Najt P. Rask R. “New Heat Transfer Correlation for an HCCI Engine Derived From Measurements of Instantaneous Surface Heat Flux” SAE Paper No. 2004-01-2996 2004
- Shahbakhti M. Koch C. R. “Thermo-Kinetic Combustion Modeling of an HCCI Engine to Analyze Ignition Timing for Control Applications” Proceeding of Combustion Institute/Canadian Section (CI/CS) Spring Technical Conference 2007
- Aquino C. F. “Transient A/F Control Characteristics of the 5 Liter Central Fuel Injection Engine” SAE Paper No. 810494 1981
- Berggren P. Perkovic A. “Cylinder Individual Lambda Feedback Control in an SI Engine”. M.Sc. Thesis Linkoping University 1996
- Melgaard H. Hendricks E. “Continuous Identification of a Four-Stroke SI Engine” Proceeding of American Control Conference 1876 1881 1990
- Chang C. Fekete N. P. Powell J. D. “Engine Air-Fuel Ratio Control Using an Event-Based Observer” SAE Paper No. 930766 1993
- Stefanopoulou A. G. Cook J. A. “Joint Air-Fuel Ratio and Torque Regulation Using Secondary Cylinder Air Flow Actuators” ASME Journal of Dynamic Systems, Measurement and Control 121 638 647 1999
- Almkvist G. Eriksson S. “An Analysis of Air to Fuel Ratio Response in a MPFI Engine Under Transient Conditions” SAE Paper No. 932753 1993
- Moskwa J.J. “Automotive Engine Modeling for Real-Time Control”. PhD. Thesis Massachusetts Institute of Technology 1988
- Shahbakhti M. Ghafuri M. Aslani A. R. Sahraeian A. Jazayeri S. A. Azadi S. “A Novel Method to Estimate Parameters of the Wall-Wetting Fuel Model in MPFI Engines for Cold Start and Warm Up Conditions” Proceeding of ASME Internal Combustion Engine Fall Technical Conference 2004
- Lupul R. “Steady State and Transient Characterization of a HCCI Engine with Varying Octane Fuel” M.Sc. thesis University of Alberta 2008
- Ljung L. “System Identification: Theory for the User”. Prentice Hall PTR Second 1999
- Tang X. Asik J. R. “Optimal A/F Ratio Estimation Model (Synthetic UEGO) for SI Engine Cold Transient AFR Feedback Control” SAE Paper No. 980798 1998
- Hendricks E. Sorenson S. C. “Mean Value Modelling of Spark Ignition Engines” SAE Paper No. 900616 1990