Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Transient Liquid Penetration of Early-Injection Diesel Sprays

Journal Article
2009-01-0839
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2009-01-0839
Published April 20, 2009 by SAE International in United States
Transient Liquid Penetration of Early-Injection Diesel Sprays
Sector:
Citation: Pickett, L., Kook, S., and Williams, T., "Transient Liquid Penetration of Early-Injection Diesel Sprays," SAE Int. J. Engines 2(1):785-804, 2009, https://doi.org/10.4271/2009-01-0839.
Language: English

References

  1. Zhao F. Asmus T.N. Assanis D. Najt P.M. Dec J.E. Eng J.A. Homogeneous Charge Compression Ignition (HCCI) Engines - Key Research and Development Issues Society of Automotive Engineers Warrendale, PA 2003
  2. Kanda T. Hakozaki T. Uchimoto T. Hatano J. Kitayama N. Sono H. “PCCI Operation with Early Injection of Conventional Diesel Fuel,” SAE Paper 2005-01-0378 , SAE Transactions 114 3 584 593 2005
  3. Klingbeil A.E. Juneja H. Ra Y. Reitz R. D. “Premixed Diesel Combustion Analysis in a Heavy-Duty Diesel Engine,” SAE Paper 2003-01-0341 , SAE Transactions 112 2003
  4. Musculus M.P.B. “Multiple Simultaneous Optical Diagnostic Imaging of Early-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine,” SAE Paper 2006-01-0079 , SAE Transactions 115 3 83 110 2006
  5. Hardy W.L. Reitz R.D. “A Study of the Effect of High EGR, High Equivalence Ratio, and Mixing Time on Emissions Levels in a Heavy-Duty Diesel Engine for PCCI Combustion,” SAE Paper 2006-01-0026 2006
  6. Kook S. Bae C Miles P.C. Choi D. Pickett L.M. “The Influence of Charge Dilution and Injection Timing on Low-Temperature Diesel Combustion and Emissions,” SAE Paper 2005-01-3837 , SAE Transactions 114 4 1575 1595 2006
  7. Kook S. Bae C Miles P.C. Choi D. Bergin M. Reitz R.D. “The Effect of Swirl Ratio and Fuel Injection Parameters on CO Emission and Fuel Conversion Efficiency for High-Dilution, Low-Temperature Combustion in an Automotive Diesel Engine,” SAE Paper 2006-01-0197 , 2006, SAE Transactions 115 3 111 132 2007
  8. Hotta Y. Inayoshi M. Nakakita K. Fujiwara K. Sakata I. “Achieving Lower Exhaust Emissions and Better Performance in an HSDI Diesel Engine With Multiple Injection,” SAE Paper 2005-01-0928 , SAE Transactions 114 3 2005
  9. Opat R. Ra Y. Gonzalez M.A. Krieger R. Reitz R.D. Foster D.E. Durret R.P. Siewert R.M. “Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light-Duty Diesel Engine,” SAE Paper 2007-01-0193 2007
  10. Mueller C.J. Martin G.C. Briggs T.E. Duffy K.P. “An Experimental Investigation of in-Cylinder Processes Under Dual-Injection Conditions in a Dl Diesel Engine,” SAE Paper 2004-01-1843 2004
  11. Minato A. Tanaka T. Nishimura T. “Investigation of Premixed Lean Diesel Combustion with Ultra High Pressure Injection,” SAE Paper 2005-01-0914 , SAE Transactions 114 3 756 764 2005
  12. Walter B. Gatellier B. “Development of the High Power NADI Concept Using Dual Mode Diesel Combustion to Achieve Zero NOx and Particulate Emissions,” SAE Paper 2002-01-1744 , SAE Transactions 111 4 779 787 2002
  13. Lechner G.A. Jacobs T.J. Chryssakis C.A. Assanis D. Siewert R.M. “Evaluation of a Narrow Spray Cone Angle, Advanced Injection Timing Strategy to Achieve Partially Premixed Compression Ignition Combustion in a Diesel Engine,” SAE Paper 2005-01-0167 2005
  14. Siewert R.M. “Spray Angle and Rail Pressure Study for Low NOx Diesel Combustion,” SAE Paper 2007-01-0122 2007
  15. Kashdan J. Mendez S. Bruneaux G. “On the Origin of Unburned Hydrocarbon Emissions In a Wall Guided, Low NOx Diesel Combustion System” SAE Paper 2007-01-1836 2007
  16. Fang T. Coverdill R.E. Lee C.F. White R. A. “Smokeless Combustion Within a Small-Bore HSDI Diesel Engine Using a Narrow Angle Injector,” SAE Paper 2007-01-0203 2007
  17. Martin G.C. Mueller C.J. Milam D. Radovanovic M. Gehrke C “Early Direct-Injection, Low-Temperature Combustion of Diesel Fuel in an Optical Engine Utilizing a 15-Hole, Dual-Row, Narrow-lncluded-Angle Nozzle,” SAE Paper 2008-01-2400 2008
  18. Yokota H. Kudo Y. Nakajima H. Kakegawa T. Suzuki T. “A New Concept for Low Emission Diesel Combustion,” SAE Paper 970891 1997
  19. Cursente V. Pacaud P. Mendez S. Knop P. de Francqueville L. “System Approach for Compliance With Full Load Targets on a Wall Guided Diesel Combustion System,” SAE Paper 2008-01-0840 2008
  20. Kalghatgi G.T. Risberg P. Angstrom H.-E. “Advantages of Fuels With High Resistance to Autoignition in Late-Injection, Low-Temperature, Compression Ignition Combustion,” SAE Paper 2006-01-3385 2006
  21. Bessonette P.W. Schleyer C.H. Duffy K.P. Hardy W.L. Liechty M.P. “Effects of Fuel Property Changes on Heavy-Duty HCCI Combustion,” SAE Paper 2007-01-0191 2007
  22. Siebers D.L. “Liquid-Phase Fuel Penetration in Diesel Sprays,” SAE Paper 980809 1998
  23. Siebers D.L. “Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization.” SAE Paper 1999-01-0528 1999
  24. Espey C. Dec J.E. “The Effect of TDC Temperature and Density on the Liquid-Phase Fuel Penetration in a D.I. Diesel Engine,” SAE Paper 952456 , SAE Transactions 104 4 1400 1416 1995
  25. Alfuso S. Allocca L. Auriemma M. Caputo G. Corcione F.E. Montanaro A. Valentino G. “Analysis of a High Pressure Diesel Spray at High Pressure and Temperature Environment Conditions,” SAE Paper 2005-01-1239 2005
  26. Desantes J.M. Pastor J.V. Payri R. Pastor J.M. “Experimental Characterization of Internal Nozzle Flow and Diesel Spray Behavior. Part II: Evaporative Conditions,” Atomization and Sprays 15 517 543 2005
  27. Naber J.D. Siebers D.L. “Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays,” SAE Paper 960034 , SAE Transactions 105 3 82 111 1996
  28. http://www.ca.sandia.gov/ECN/
  29. Siebers D. Higgins B. Pickett L.M. “Flame Lift-Off on Direct-Injection Diesel Fuel Jets: Oxygen Concentration Effects,” SAE Paper 2002-01-0890 , SAE Transactions 111 3 1490 1509 2002
  30. Kook S. Pickett L.M. Musculus M.P.B. Gemlich R.K. “Influence of Diesel Injection Parameters on End-of-lnjection Liquid Length Recession” SAE Paper 2009-01-1356 2009
  31. Settles G. S. Schlieren and Shadowgraph Techniques Springer-Verlag 2001
  32. Pickett L.M. Kook S. Williams T.C. “Visualization of Diesel Spray Penetration, Cool-Flame, Ignition, High-Temperature Combustion, and Soot Formation Using High-Speed Imaging,” SAE Paper 2009-01-0658 2009
  33. Musculus M.P.B. Kattke K. “Entrainment Waves in Diesel Jets,” SAE Paper 2009-01-1355 2009
  34. Anders J.W. Magi V. Abraham J. “A Computational Investigation of the Interaction of Pulses in Two-Pulse Jets,” Num. Heat Tran., Part A: Applications 54 11 999 1021 2008
  35. Musculus M.P.B. Lachaux T. Pickett L.M. Idicheria C.A. “End-of-lnjection Over-Mixing and Unburned Hydrocarbon Emissions in Low-Temperature-Combustion Diesel Engines,” SAE Paper 2007-01-0907 , SAE Transactions 116 2007

Cited By

Recommended Content

Technical Paper Experimental and Numerical Study of Water Spray Injection at Engine-Relevant Conditions
Technical Paper Effects of Valve-Shrouding and Squish on Combustion in a Spark-ignition Engine
Technical Paper Novel Metrics for Validation of PIV and CFD in IC Engines