This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Characterization of Diesel Common Rail Spray Behavior for Single- and Double-hole Nozzles

Journal Article
ISSN: 1946-3936, e-ISSN: 1946-3944
Published October 06, 2008 by SAE International in United States
Characterization of Diesel Common Rail Spray Behavior for Single- and Double-hole Nozzles
Citation: Matsumoto, A., Xie, X., Lai, M., Winsor, R. et al., "Characterization of Diesel Common Rail Spray Behavior for Single- and Double-hole Nozzles," SAE Int. J. Engines 1(1):1144-1156, 2009,
Language: English


  1. Montgomery, D.T. Chan, M. Chang, C. T. Farrell, P. V. Reitz, R.D. “Effect of Injector Nozzle Hole Size and Number on Spray Characteristics and the Performance of a Heavy Duty D.I. Diesel Engine,” SAE 962002 1996
  2. Arregle, J. Pastor, J.V. Ruiz, S. “The Influence of Injection Parameters on Diesel Spray Characteristics,” SAE 1999-01-0200 1999
  3. Siebers, D.L. “Liquid-Phase Fuel Penetration in Diesel Sprays,” SAE 980809 1998
  4. Bergstrand, P. Denbratt, I. “Diesel Combustion with Reduced Nozzle Orifice Diameter,” SAE 2001-01-2010 2001
  5. Tokuda, H. Itoh, S. Kinugawa, M. Shirabe, N. “Denso CRT to Successfully Meet Future Emission Regulation,” 2005 Vienna Symposium 26
  6. Zhang, Y. Nishida, K. Tokuda, H. Nomura, S. Itoh, T. “Spray Characteristics of Group-hole Nozzle for D.I. Diesel Engine” SAE 2003-01-3115 2003
  7. Gao, J. Matsumoto, Y. Nishida, K. “Fuel Injection Strategies to Enhance Evaporation in D.I. Diesel Sprays,” JSAE 20065859 2006
  8. Nishida, K. Nomura, S. Matsumoto, Y. “Spray and Mixture Properties of Group-Hole Nozzle for D.I. Diesel Engines,” ICLASS-2006 2006
  9. Gao, J Matsumoto, Y. Namba, M. Nishida, K. Group-Hole Nozzle Effects on Mixture Formation and In-cylinder Combustion Processes in Direct Injection Diesel Engines SAE 2007-01-4050 2007
  10. Gao, J. Matsumoto, Y. Nishida, K. “Effects of Group-hole Nozzle Specifications on Fuel Atomization and Evaporation of Direct Injection Diesel Sprays,” SAE 2007-01-1889 2007
  11. Matsumoto Y. Gao, J. Nishida, K. “Mixture Formation and Combustion Processes of Multi-Hole Nozzle with Micro Orifices for DI Diesel Engines,” SAE 2007-01-4049 2007
  12. Park, S.W. Reitz, R.D. “Modeling the Effect of Injector Nozzle-Hole Layout on Diesel Engine Fuel Consumption and Emissions,” Journal of Engineering for Gas Turbines and Power 2008 130
  13. Bergin, M.J. Reitz, R.D. “Optimization of Injector Spray Configurations for an HSDI Diesel Engine at High Load,” ASME ICEF2007-1761 2007
  14. Pawlowski, A. Kneer, R. Lippert, A.M. Parrish, S.E. “Investigation of the Interaction of Sprays from Clustered Orifices under Ambient Conditions Relevant for Diesel Engines” SAE Int. J. Engines 1 1 514 527 2008
  15. Pierpont, D.A. Montgomery, D.T. Reitz, R.D. “Reducing Particulate and NOx Using Multiple Injections and EGR in a D.I. Diesel,” SAE 950217 1995
  16. Dohle, U. Kruger, M. Naber, D. Stein, J.O. Gauthier, Y. “Results of Combustion Optimization by use of Multi-hole Nozzles in Modern Passsenger Car Diesels,” 2006 Vienna Symposium 27
  17. Adomeit, Ph. Rohs, H. Korfer, T. Busch, H. Spray Interaction and Mixture Formation in Diesel Engines with Grouped Hole Nozzles THIESEL 2006
  18. Mulemane, A. Subramaniyam, S. Lu, P.-H. Han, J.-S. Lai, M.-C. Poola, R. “Comparing cavitation in diesel injectors based on different modelling approaches,” SAE 2004-01-0027
  19. Lai, M.-C. Wang, T.C. Xie, X. Han, J.-S. et. a. “Microscopic Characterization of Diesel Sprays at VCO Nozzle Exit,” SAE 982542 1998
  20. Wang, T.-C. Han, J.-S. Lai, M.-C. “Parametric Characterization of High-Pressure Diesel Fuel Injection Systems,” J. of Engineering for Gas Turbines and Power 2003 125 412 426
  21. Gupta, S. Poola, R. Sekar, R. “Injection Parameter Effects on Diesel Spray Characteristics,” SAE 2000-01-2787 2000
  22. Hiroyasu, H. Arai, M. “Structures of Fuel Spray in Diesel Engines,” SAE 900475 1990

Cited By