Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

CFD-Based Optimization of a Diesel-fueled Free Piston Engine Prototype for Conventional and HCCI Combustion

Journal Article
2008-01-2423
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2008-01-2423
Published October 06, 2008 by SAE International in United States
CFD-Based Optimization of a Diesel-fueled Free Piston Engine Prototype for Conventional and HCCI Combustion
Sector:
Citation: Bergman, M., Fredriksson, J., and Golovitchev, V., "CFD-Based Optimization of a Diesel-fueled Free Piston Engine Prototype for Conventional and HCCI Combustion," SAE Int. J. Engines 1(1):1118-1143, 2009, https://doi.org/10.4271/2008-01-2423.
Language: English

References

  1. Goldsborough, S. Van Blarigan, P. Optimizing the Scavenging System for a Two-Stroke Cycle, Free Piston Engine for High Efficiency and Low Emissions: A Computational Approach SAE Paper 2003-01-0001 2003
  2. Carter, D. Wechner, E. The Free Piston Power Pack: Sustainable Power for Hybrid Electric Vehicles SAE Paper 2003-01-3277 2003
  3. Caresana, F. Comodi G. Pelagalli, L. Design Approach for a Two-Stroke Free Piston Engine for Electric Power Generation SAE Paper 2004-32-0037 2004
  4. Max, E. FPEC, Free Piston Energy Converter, Proceedings of the 21st Worldwide International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition (EVS21 Monaco) Monaco 2-6 April 2005
  5. Kleemann, A.P. Dabadie, J.C. Henriot, S. Computational Design Studies for a High-Efficiency and Low-Emissions Free Piston Engine Prototype SAE Paper 2004-01-2928 2004
  6. Fredriksson, J. Bergman, M. Golovitchev, V.I. Denbratt, I. Modeling the Effect of Injection Schedule Change on Free Piston Engine Operation SAE Paper 2006-01-0449 2006
  7. Bergman, M. Fredriksson, J. Golovitchev, V.I. Performance and Emission Formation Evaluation of a Diesel-Fueled Free Piston Engine using CFD JSAE Paper 20065454 2006
  8. Amsden A.A. KIVA-3V: A Block-structured KIVA Program for Engines with Vertical or Canted Valves, LA-13313-MS July 1997
  9. Bergman, M. Golovitchev, V.I. Application of Transient Temperature vs. Equivalence Ratio Emission Maps to Engine Simulations SAE paper 2007-01-1086 2007
  10. Guibet, J.C. Fuels and Engines, Editions Technip Paris 1999
  11. Farrell, J.T. Chernavsky, N.P Dryer, F.L. et al Development of an Experimental Database and Kinetic Models for Surrogate Diesel Fuels SAE Paper 2007-01-0201 2007
  12. Bergman, M. Golovitchev, V.I. Chemical Mechanisms for Modeling HCCI with Gasoline and Diesel Oil Surrogates Proceedings of the VII. Congress on Engine Combustion Processes 323 334 Munchen 15-16 March 2005 http://web.student.chalmers.se/∼miriam78/first.pdf
  13. Gustavsson*, J. Golovitchev, V. I. Helmantel, A. 3-D Modelling of Conventional and HCCI Combustion Diesel Engines SAE paper 2004-01-2964 2004
  14. Bergman, M. Golovitchev, V.I. Modification of a Diesel Oil Surrogate Model for 3D CFD Applied to Conventional and HCCI Combustion SAE Paper 2008-01-2410 2008
  15. Nagle, J. Strickland-Constable, R.F. Proc. 5th Carbon Conf. 1 154 1962
  16. Heywood, J. B. Internal Combustion Engine Fundamentals 638 McGraw-Hill Book Company 1988
  17. Stiesch, G. Modeling Engine Spray and Combustion Processes Springer-Verlag Berlin Heidelberg 2003
  18. Aceves, S.M. Flowers, D.L. Espinoza-Loza, F. Babajimopoulos, A. Assanis, D.N. Analysis of Premixed Charge Compression Ignition Combustion with a Sequential Fluid Mechanics-Multizone Chemical Kinetics Model SAE Paper 2005-01-0115 2005
  19. Babajimopoulos, A. Assanis, D. Flowers, D. Aceves, S. Hessel, R. A Fully Coupled Computational Fluid Dynamics and Multi-Zone Model with Detailed Chemical Kinetics for the Simulation of Premixed Charge Compression Ignition Engines International Journal of Engine Research 6 5 497 512 16 2005
  20. Singh, S. Reitz, R.D. Musculus, M.P.B. Comparison of the Characteristic Time (CTC), Representative Interactive Flamelet (RIF), and Direct Integration with Detailed Chemistry Combustion Models against Optical Diagnostic Data for Multi-Mode Combustion in a Heavy-Duty DI Diesel Engine SAE Paper 2006-01-0055 2006
  21. Kong, S.C. Reitz, R.D. Application of Detailed Chemistry and CFD for Predicting Direct Injection HCCI Engine Combustion and Emissions Proceedings of the Combustion Institute 29 663 669 2002
  22. Patterson, M. A. Reitz, R. D. Modeling the Effects of Fuel Spray Characteristics on Diesel Engine Combustion and Emission SAE Paper 980131 1998
  23. Tao Feng Dr. Chalmers University 2007
  24. Tao, F. Foster, D. E. Reitz, R. D. Soot Structure in a Conventional Non-Premixed Diesel Flame SAE paper 2006-01-0196 2006
  25. Siebers, D. L. Liquid-Phase Fuel Penetration in Diesel Sprays SAE Paper 980809 1998
  26. Fredriksson, J. Denbratt, I. Simulation of a Two-Stroke Free Piston Engine SAE Paper 2004-01-1871 2004
  27. West Martin Volvo Technology 2008
  28. Amneus, P. Mauss, F. Kraft, M. Vressner, A. Johansson, B. NO x and N 2 O Formation in HCCI Engines SAE Paper 2005-01-0126 2005
  29. Denbratt Ingemar Professor Chalmers University 2008
  30. Helmantel, A. Low Emission Concepts for Diesel Engines, PhD thesis Department of Applied Mechanics Chalmers University of Technology Göteborg, Sweden 2006
  31. Ryan, T. South West Research Institute, USA, Slides from the lecture: Advanced Combustion for Low Emissions and High Efficiency, given at the 7:th International Conference on Engines for Automobile, ICE 2005 (SAE Naples section) Italy September 2005

Cited By

Recommended Content

Technical Paper Turbulence Intensity Calculation from Cylinder Pressure Data in a High Degree of Freedom Spark-Ignition Engine
Technical Paper Effect of Breathing Characteristics on the Performance in Spark-Ignition Engines
Technical Paper Development of Two Stage Turbo-Charging for Medium Duty Diesel Engine of Power Generation Application