Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Experimental Assessment of Instantaneous Heat Transfer in the Combustion Chamber and Exhaust Manifold Walls of Air-Cooled Direct Injection Diesel Engine

Journal Article
2008-01-1326
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2008-01-1326
Published April 14, 2008 by SAE International in United States
Experimental Assessment of Instantaneous Heat Transfer in the Combustion Chamber and Exhaust Manifold Walls of Air-Cooled Direct Injection Diesel Engine
Sector:
Citation: Mavropoulos, G., Rakopoulos, C., and Hountalas, D., "Experimental Assessment of Instantaneous Heat Transfer in the Combustion Chamber and Exhaust Manifold Walls of Air-Cooled Direct Injection Diesel Engine," SAE Int. J. Engines 1(1):888-912, 2009, https://doi.org/10.4271/2008-01-1326.
Language: English

References

  1. Benson R.S. Whitehouse N.D. Internal Combustion Engines Pergamon, Oxford 1979
  2. Heywood J.B. Internal Combustion Engine Fundamentals McGraw-Hill New York 1988
  3. Ferguson C.R. Internal Combustion Engines John Wiley New York 1986
  4. Annand W.J.D. “Heat transfer in the cylinders of reciprocating internal combustion engines” Proceedings of the Institution of Mechanical Engineers 177 973 990 1963
  5. French C.C.J. “Piston cooling” SAE Paper No. 720024 1972
  6. Seale W.J. Taylor D.H.C “Spatial variation of heat transfer to pistons and liners of some medium speed diesel engines” Proceedings of the Institution of Mechanical Engineers 185 203 218 1970-71
  7. Whitehouse N.D. “Heat transfer in a quiescent chamber diesel engine” Proceedings of the Institution of Mechanical Engineers 185 963 975 1970-71
  8. Rakopoulos C.D. Hountalas D.T. “Development and validation of a 3-D multi-zone combustion model for the prediction of DI diesel engines performance and pollutants emissions” Transactions of SAE, Journal of Engines 107 1413 1429 1998 SAE Paper No. 981021
  9. Kouremenos D.A. Rakopoulos C.D. Hountalas D.T. “Thermodynamic analysis of indirect injection diesel engines by two-zone modelling of combustion” Transactions of ASME, Journal of Engineering for Gas Turbines and Power 112 138 149 1990
  10. Kouremenos D.A. Rakopoulos C.D. Hountalas D.T. “Multi-zone combustion modeling for the prediction of pollutants emissions and performance of DI diesel engines” Transactions of SAE, Journal of Engines 106 940 957 1997 SAE Paper No. 970635
  11. Keribar R. Morel T. “Thermal shock calculations in I.C. engines” SAE Paper No. 870162 1987
  12. Morel T. Wahiduzzaman S. Fort E.F. “Heat transfer experiments in an insulated diesel” SAE Paper No. 880186 1988
  13. Enomoto Y. Furuhama S. “A study of the local heat transfer coefficient on the combustion chamber walls of a four-stroke gasoline engine” Bulletin JSME 32 107 114 1989
  14. Alkidas A.C. Myers J.P. “Transient heat-flux measurements in the combustion chamber of a spark-ignition engine” Transactions of ASME, Journal of Heat Transfer 104 62 67 1982
  15. Alkidas A.C. Cole R.M. “Transient heat-flux measurements in a divided-chamber diesel engine” Transactions of ASME, Journal of Heat Transfer 107 439 444 1985
  16. Borman G. Nishiwaki K. “Internal-combustion engine heat transfer” Progress in Energy and Combustion Science 13 1 46 1987
  17. Perez-Blanco H. “Experimental characterization of mass, work and heat flows in an air cooled, single cylinder engine” Energy Conversion & Management 45 157 169 2004
  18. Tillock B.R. Martin J.K. “Measurement and modeling of thermal flows in an air-cooled engine” Transactions of SAE, Journal of Engines 105 1781 1789 1996 SAE Paper No. 961731
  19. Zhaoda Y. Zheng F. Xiaoli Y. Zhixing Y. Hongouan S. “Calculation and prediction of thermal loading of the air-cooled diesel engine” SAE Paper No. 881254 1988
  20. Rakopoulos C.D. Scott M.A. Kyritsis D.C. Giakoumis E.G. “Availability analysis of hydrogen/natural gas blends combustion in internal combustion engines” Energy 33 2008
  21. Rakopoulos C.D. Antonopoulos K.A. Rakopoulos D.C. “Experimental heat release analysis and emissions of a HSDI diesel engine fueled with ethanol-diesel fuel blends” Energy 32 1791 1808 2007
  22. Rakopoulos C.D. Antonopoulos K.A. Rakopoulos D.C. “Development and application of a multi-zone model for combustion and pollutants formation in direct injection Diesel engine running with vegetable oil or its bio-diesel” Energy Conversion & Management 48 1881 1901 2007
  23. Kamo R. Bryzik W. “Cummins/TACOM advanced adiabatic engine” SAE Paper No. 840428 1984
  24. Assanis D.N. “Effect of combustion chamber insulation on the performance of a low heat rejection diesel engine with exhaust heat recovery” Heat Recovery Systems & CHP 9 475 484 1989
  25. Rakopoulos C.D. Antonopoulos K.A. Rakopoulos D.C. Giakoumis E.G. “Investigation of the temperature oscillations in the cylinder walls of a diesel engine with special reference to the limited cooled case” Int. J. of Energy Research 28 977 1002 2004
  26. Lazaro J.L. Garcia-Bernad J.L. Perez C. Galindo J. Climent H. Arnau F.J. “Cooled EGR modulation: a strategy to meet EURO IV emission standards in automotive DI diesel engines” SAE Paper No. 2002-01-1154 2002
  27. Kanda T. “Study on Euro IV combustion technologies for direct injection diesel engine” SAE Paper No. 2004-01-0113 2004
  28. Mure C.R. Rhee K.T. “Instantaneous heat transfer over the piston of a motored direct injection-type diesel engine” SAE Paper No. 890469 1989
  29. Farrugia M. Alkidas A.C. Sangeorzan B.P. “Cycle-averaged heat flux measurements in a straight-pipe extension of the exhaust port of a SI engine” SAE Paper No. 2006-01-1033 2006
  30. Sammut G. Alkidas A.C. “Relative contributions of intake and exhaust tuning on SI engine breathing - A computational study” SAE Paper No. 2007-01-0492 2007
  31. Heller S. Wachtmeister G. “Analysis and modeling of heat transfer in the SI engine exhaust system during warm-up” SAE Paper No. 2007-01-1092 2007
  32. Rakopoulos C.D. Mavropoulos G.C. “Study of the steady and transient temperature field and heat flow in the combustion chamber components of a medium speed diesel engine using finite element analyses” Int. J. of Energy Research 20 437 464 1996
  33. Rakopoulos C.D. Hountalas D.T. Mavropoulos G.C. Giakoumis E.G. “An integrated transient analysis simulation model applied in thermal loading calculations of an air-cooled diesel engine under variable speed and load conditions” Transactions of SAE, Journal of Engines 106 923 939 1997 SAE Paper No. 970634
  34. Rakopoulos C.D. Mavropoulos G.C. Hountalas D.T. “Modeling the structural thermal response of an air-cooled diesel engine under transient operation including a detailed thermodynamic description of boundary conditions” SAE Paper No. 981024 1998
  35. Rakopoulos C.D. Mavropoulos G.C. “Components heat transfer studies in a low heat rejection DI diesel engine using a hybrid thermostructural finite element model” Applied Thermal Engineering 18 301 316 1998
  36. Rakopoulos C.D. Mavropoulos G.C. “Experimental instantaneous heat fluxes in the cylinder head and exhaust manifold of an air-cooled Diesel engine” Energy Conversion & Management 41 1265 1281 2000
  37. Rakopoulos C.D. Mavropoulos G.C. Hountalas D.T. “Measurements and analysis of load and speed effects on the instantaneous wall heat fluxes in a direct injection air-cooled diesel engine” Int. J. of Energy Research 24 587 604 2000
  38. Rakopoulos C.D. Rakopoulos D.C. Mavropoulos G.C. Giakoumis E.G. “Experimental and theoretical study of the short term response temperature transients in the cylinder walls of a Diesel engine at various operating conditions” Applied Thermal Engineering 24 679 702 2004
  39. Amsden A.A. Butler T.D. O'Rourke P.J. Ramshaw J.D. “KIVA-a comprehensive model for 2-D and 3-D engine simulations” SAE Paper No. 850554 1985
  40. Morel T. Keribar R. “A model for predicting spatially and time resolved convective heat transfer in bowl-in-piston combustion chambers” SAE Paper No. 850204 1985
  41. Yoo S. Kim E. “A study of in-cylinder local heat transfer characteristics of a spark ignition engine” SAE Paper No. 931981 1993
  42. Welty J.R. Engineering Heat Transfer John Wiley New York 1974
  43. Alkidas A.C. Battiston P.A. Kapparos D.J. “Thermal studies in the exhaust system of a diesel-powered light-duty vehicle” SAE Paper No. 2004-01-0050 2004
  44. Ranganathan R.P. Turner D.W. Franchett M.E. “Exhaust manifold gas temperature predictions using system level data driven modeling” SAE Paper No. 2005-01-0698 2005
  45. NANMAC “Temperature Measurement Handbook” VIII Framingham MA 1997
  46. Farrugia M. Alkidas A.C. Sangeorzan P. “Transient surface-heat-flux measurements in the exhaust of a SI engine” Int. J. of Vehicle Design 45 1 2 1 11 2007
  47. Wimmer A. Pivec R. Sams T. “Heat transfer to the combustion chamber and port walls of IC engines-measurement and prediction” SAE Paper No. 2000-01-0568 2000
  48. He Y. Battiston P.A. Alkidas A.C. “Thermal studies in the exhaust manifold of a turbocharged V6 diesel engine operating under steady-state conditions” SAE Paper No. 2006-01-0688 2006
  49. Kar K. Roberts S. Stone R. Oldfield M. French B. “Instantaneous exhaust temperature measurements using thermocouple compensation techniques” SAE Paper No. 2004-01-1418 2004

Cited By

Recommended Content

Technical Paper Exhaust Phases in a DI Diesel Engine Based on Instantaneous Cyclic Heat Transfer Experimental Data
Journal Article Calibration of a TFG Sensor for Heat Flux Measurements in a S.I. Engine
Technical Paper Laser Ignition of Single Cylinder Engine and Effects of Ignition Location