This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Seat Belt Buckle Release by Inadvertent Contact
Technical Paper
2008-01-1236
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
When an automotive seat belt buckle is believed to have released during a motor vehicle accident, it is typically attributed to one of several potential mechanisms, including inertial release, partial engagement, inadvertent contact, or structural overload. While the majority of literature in the past has focused on the topic of inertial release, little has been written on other release mechanisms. This review paper addresses automotive seat belt buckle release by inadvertent contact between the buckle pushbutton and some other object.
This paper describes the conditions that must be satisfied for inadvertent contact to result in buckle release, including release force, direction, and pushbutton travel. We explain the role of occupant kinematics and the likelihood of contact between and occupant's hand or arm and the pushbutton. Occurrences of inadvertent contact in safety testing and a real world case study are presented. In addition, requirements of United States Federal Motor Vehicle Safety Standards (FMVSS) 208 and 209, United Nations Economic Commission for Europe (UNECE) Regulation 16, and European Economic Community (EEC) Directive 77/541 relating to inadvertent contact will be discussed. Also addressed are the design guidelines that have been adopted by some manufacturers to formalize the design process, including “ball tests”.
Ultimately, the occupant restraint engineer must balance the possibility of release by inadvertent contact with the requirement of easy and rapid removal to maximize safety and promote seat belt usage. We discuss the need for an engineer to consider not only buckle design, but also the vehicle environment in which a buckle will be used, because buckle mounting and location within a vehicle may affect the likelihood of release due to inadvertent contact.
Recommended Content
Authors
Topic
Citation
Davee, D., Raasch, C., Moralde, M., and Van Arsdell, W., "Seat Belt Buckle Release by Inadvertent Contact," SAE Technical Paper 2008-01-1236, 2008, https://doi.org/10.4271/2008-01-1236.Also In
References
- Moffatt E.A., Thomas T.M. and Cooper E.R., “Safety Belt Buckle Inertial Responses in Laboratory and Crash Tests”, SAE 950887, 1995.
- 29 FR 16973, December 11, 1964.
- 30 FR 8432, July 1, 1965; 31 FR 11528, August 31, 1966.
- NHTSA Interpretation File - To: Robert E. Norton II, Senior Staff Counsel, DaimlerChrysler Corporation, From: Stephen P. Wood, Assistant Chief Counsel, 2003.
- 36 FR 4607; March 10, 1971.
- NHTSA Interpretation File - To: Volvo of America Corporation, From: F. Berndt, Acting Chief Counsel, 1976.
- NHTSA Interpretation File - To: BMW of North America, Inc., From: F. Berndt, Acting Chief Counsel, 1976.
- Personal communication, VCA North America.
- NHTSA, Petition DP92-017, “Inadvertent Release of Safety Belt Buckles”, Office of Defects Investigation, November 18, 1992.
- Raasch C., Davee D. and Luepke P., “Seat Belt Entanglement in Rollover Accidents: Physical Evidence and Occupant Kinematics”, SAE 2008-01-1237.
- www.nhtsa.dot.gov/cars/problems/rollovers/characteristics_fatalities.htm
- Buying a Safer Car, DOT HS 809 546, 2003.
- Kendall, D.L., Fowkles M., Gazeley I and Haslegrave C.M., “Comfort and Convenience of Safety Belts in Everyday Use”, The Motor Industry Research Association, 1981.
- 44 FR 77210, December 31, 1979.
- 50 FR 46056, November 5, 1985.
- Pierce B.F., Woodson W.E. and Selby P.H., “Sources and remedies for restraint systems discomfort and inconveniences”, DOT HS-801-277, November 1974.
- Noy, Y.I., “Seat Belt Buckle Release Force: Cause for Entrapment?” SAE 9303421, 1993.