This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Analysis of Premix Flame and Lift-Off in Diesel Spray Combustion using Multi-Dimensional CFD

Journal Article
2008-01-0968
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 14, 2008 by SAE International in United States
Analysis of Premix Flame and Lift-Off in Diesel Spray Combustion using Multi-Dimensional CFD
Sector:
Citation: Campbell, J., Gosman, A., and Hardy, G., "Analysis of Premix Flame and Lift-Off in Diesel Spray Combustion using Multi-Dimensional CFD," SAE Int. J. Engines 1(1):571-590, 2009, https://doi.org/10.4271/2008-01-0968.
Language: English

References

  1. STAR-CD v3.2 Methodology CD-Adapco London 2005
  2. STAR-CD v3.26 Supplementary notes CD-Adapco London 2005
  3. Barths Three-dimensional simulation of pollutant formation in a di diesel engine using multiple interactive flamelets SAE Technical paper , ( 982459 ) 1998
  4. Chomiak J. Karlsson A. Flame lift-off in diesel sprays Proc. Combust. Inst. 26 2557 2504 1996
  5. Curran H. J. Gaffuri P. Pitz W. J. Westbrook C. K. A comprehensive modeling study of n-heptane oxidation Combustion and Flame 1998
  6. Wilcox D.C. Turbulence Modeling for CFD DCW Industries 1998
  7. Diwaker Assessment of the ability of a multi-dimensional computer code to model combustion in a homogenous charge engine SAE technical paper , ( 840230 ) 1984
  8. Lyons K. M. Watson K. A. Carter C. D. Donbar J. M. Upstream islands of flame in lifted-jet partially premixed combustion Combustion Science and Technology 2007
  9. Siebers D. Higgins B. Flame lift-off on direct-injection diesel sprays under quiescent condition SAE Technical Paper , ( 2001-01-0530 ) 2001
  10. Siebers D. Higgins B. Measurements of the flame lift-off location on di diesel sprays using oh chemiluminescence SAE Technical Paper , ( 2001-01-0918 ) 2001
  11. Dukowicz J.K. A particle-fluid numerical model for liquid sprays Journal of Computational Physics 1980
  12. Espey Christoph Dec John E. Planar laser rayleigh scattering for quantitative vapour-fuel imagiing in a diesel jet Combustion and Flame 109 65 86 1997
  13. Tap F.A. Veynante D. Simulation of flame lift-off on a diesel jet using a generalized flame surface density modeling approach Proceedings of the Combustion Institute 30 912 926 2005
  14. Demoulin F.X. Borghi R Modeling of turbulent spray combustion with application to diesel like experiment Combustion and Flame 2002
  15. Gosman A.D. Clerides D. Diesel spray modelling: A review ILASS Europe Annual Meeting 1997
  16. Subramanian G. Pires da Crus A. Colin O. Vervisch L. Modeling engine turbulent auto-ignition using tabulated detailed chamistry SAE Technical paper , ( 2007-01-0150 ) 2007
  17. Hasse C. Bikas G. Peters N. Modeling di diesel combustion using the eulerian particle flamelet model SAE Technical paper , ( 2000-01-2934 ) 2000
  18. Hiroyasu H. Kadota T. Arai M. Bull JSME 1983
  19. Higgins B.S. Siebers D.L. Aradi A. Diesel spray ignition and premixed burn behaviour SAE technical paper , ( 2000-01-0940 ) 2000
  20. Hiroyasu H. Nishida K. Simplified three-dimensional modeling of mixture formation and combustion in a d.i. diesel engine SAE Technical paper 1989
  21. Idicheria Cherian A. Pickett Lyle Quantitative mixing measurements in a vaporizing diesel spray by rayleigh imaging SAE Technical paper 2007
  22. Idicheria Cherian A. Pickett Lyle M. Effect of egr on diesel premixed-burn equivalence ratio Proc. Combust. Inst. 2007
  23. IMAGINE/AMESim http://www.amesim.com/software/tools/ifp-c3d.aspx
  24. Magnussen I. Balthasar M. Hellstroem T. Simulation of soot formation for diesel engine like conditions and comparison with experimental data THIESEL 2006 Conference on Thermo- and Fluid Dynamic Processes in Diesel Engines 2006
  25. Iyer Venkatraman Abraham John An evaluation of a two-fluid eulerian-liquid eulerian-gas model for diesel sprays Journal of Fluids Engineering 2003
  26. Dec J.E. A conceptual model of di diesel combustion based on laser-sheet imaging SAE Technical Paper Series , ( 970873 ) 1997 Society of Automobile Engineers
  27. Jones W.P. Whitelaw J.H. Calculation methods for reacting turbulent flows: A review Combustion and Flame 1982
  28. Krueger C Validierung eines 1D-Spraymodells zur Simulation der Gemischebildung in direkteinspritzenden Dieselmotoren RWTH Aachen 2001
  29. Vanquickenborne L. Van Tiggelen A. The stabilization mechanism of lifted diffusion flames Combustion and Flame 10 59 69 1966
  30. Sandia National Laboratories
  31. Sandia National Laboratories
  32. Lehtiniemi Harry Mauss Fabian Balthasar Michael Magnusson Ingemar Modeling diesel engine combustion with detailed chemistry using a progress variable approach SAE Technical paper , ( 2005-01-3855 ) 2005
  33. Lehtiniemi Harry Mauss Fabian Balthasar Michael Magnusson Ingemar Modeling diesel spray ignition using detailed chemistry with a progress variable approach Combustion Science and Technology 2006
  34. Pickett L. Siebers D. Soot in diesel fuel jets: effects of ambinet temperature, ambient density, and injection pressure Combustion and Flame 2004
  35. Zolver M. Klahr D. Bohbot J. Laget O. Torres A. Reactive cfd in engines woith a new unstructured parallel solver Oil Gas and Science Review 58 33 46 2003
  36. Duclos Jean-Marc Zellat Marc Duranti Stefano Towards a universal combustion model in star-cd for ic engines: from gdi to hcci and application to di diesel combustion optimization Multi-dimensional Engine Modelling Users conference 2003
  37. Metghalchi M. Keck J.C Burning velocities of mixtures of air with methanol, iso-octane and indolene at high pressure and temperature Combust. Flame 48 191 210 1982
  38. Naber J.D. Siebers D.L. Effects of gas density and vaporization on penetration and dispersion of diesel sprays SAE Technical paper , ( 960034 ) 1996
  39. Nagle J. Strickland-Constable R..F. Oxidation of carbon between 1000-2000 c Proc. of the Fifth Carbon Conference 154 Pegamamon Press 1962
  40. Colin. O. Pires da Cruz A. Jay S. Detailed chemistry based auto-ignition model including low temperature phenomena applied to 3d engine calculations Proceedings of the Combustion Institute 2005
  41. Colin O. Benkenida A. The 3-zones extended coherent flame model (ECFM3Z) for computing premixed/diffusion combustion Oil and Gas Science and Technology - Review IFP 59 6 593 609 2004
  42. Patterson M.A. Kong S.G. Hampson G.J. Reitz R.D Modeling the effects of fuel injection characteristics on diesel engine soot and no x emissions SAE Technical Paper Series , ( 940523 ) 1994 Society of Automobile Engineers
  43. Pauls Christoph Vogel Stefan Gruenefeld Gerd Peters Norbert Combined simulations and oh-chemiluminescence measurements of the combustion process using different fuels under diesel-engine like conditions SAE Technical paper , ( 2007-01-0020 ) 2007
  44. Peters N The effects of spray formation on mixing, auto-ignition and combustion in diesel engines THIESEL 2006 Conference on Thermo- and Fluid Dynamic Processes in Diesel Engines 2006
  45. Peters N Williams F.A. Liftoff characteristics of turbulent jet diffusion flames AIAA Journal 21 1983
  46. Peters Norbert Turbulent Combustion Cambridge University Press 2000
  47. Pickett L.M. Idicheria C.A. Effects of ambient temeprature and density on soot formation under high egr conditions Thiesel Conference Proceedings 2006 2004
  48. Pitsch H. Wan Y.P. Peters N. Numerical investigation of soot formation and oxidation under diesel engine condition SAE technical paper , ( 952357 ) 1995
  49. Pope S.B. A explanation of the turbulent round-jet/plane-jet anomaly AIAA 16 1978
  50. Reveille B. Kleeman A. Jay S. Towards even cleaner diesel engines: Contribution of 3d cfd tools Oil & Gas Scienec and Technology - Rev.IFP 61 1 2006
  51. Steiner R. Bauer C. Krueger C. Otto F. Maas U. 3d-simulation of a di-diesel combustion applying a progress variable approach accounting for complex chemistry SAE , ( 2004-01-0106 ) 2004
  52. Tatschl R. Preisching P. Ruetz J. Recent advances in di-diesel combustion modeling in avl fire - a validation study International Multidiemnsional Engine Modeling User's Group Meeting April 2007
  53. Venugopal R. Abraham J. A numerical investigation of flame lift-off in diesel jets Combustion Science and Technology 179 2599 2618 2007
  54. Senecal P.K. Pomraning E. Richards K.J. Briggs T.E Choi C.Y. McDavid R.M. Patterson M.A. Multi-dimensional modeling of direct-injection diesel sp[ray liquid length and flame lift-off length using cfd and parallel detailed chemistry SAE technical series , ( 2003-01-1043 ) 2003
  55. Siebers Dennis L. Liquid-phase fuel penetration in diesel sprays SAE technical paper , ( 980809 ) 1998
  56. Subramanian G. Colin O. Pires da cruz A. Vervisch L. Bruneaux G. Modeling turbulent mixing of an evaporating spray 20th International Colloquium on the Dynamics of Explosions and Reactive Systems - ICDERS 2005
  57. Subramanian G. Vervisch L. Ravet F. New developments in turbulent combustion modeling for engine design: The ecfm-cleh combustion submodel SAE Technical paper , ( 2007-01-0154 ) 2007
  58. Venugopal R. Abraham J. A review of fundamental studies relevant to flame lift-off in diesel jets SAE Technical paper 2007
  59. Magi V. Iyer V. Abraham J. The k-epsilon model and computed spreading rates in round and plane jets Numerical Heat Transfer,Part A 40 317 334 2001
  60. von Berg E. Alajbegovic A. Tatschl R. Krueger C. Michels U. Multiphase modeling of diesel sprays with the eulerian/eulerian approach ILASS 2001
  61. Engine Combustion Network Website Sandia National Laboratories

Cited By