This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Late Intake Valve Closing as an Emissions Control Strategy at Tier 2 Bin 5 Engine-Out NOx Level

Journal Article
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 14, 2008 by SAE International in United States
Late Intake Valve Closing as an Emissions Control Strategy at Tier 2 Bin 5 Engine-Out NOx Level
Citation: He, X., Durrett, R., and Sun, Z., "Late Intake Valve Closing as an Emissions Control Strategy at Tier 2 Bin 5 Engine-Out NOx Level," SAE Int. J. Engines 1(1):427-443, 2009,
Language: English


  2. Yanagihara, H. et al. Proc. 17th Int. Vienna Motor symp. 1996 303
  3. Stein, R.A. Galletti, K.M. Leone, T.G. “Dual equal VCT - A variable camshaft timing strategy for improved fuel economy and emissions” SAE paper 95097
  4. Leone, T.G. Christenson, E.J. Stein, R.A. “Comparison of variable camshaft timing strategies at part load” SAE paper 960584
  5. Parvate-Patil, G. B. Hong, H. Gordon, B. “Analysis of Variable Valve Timing Events and Their Effects on Single Cylinder Diesel Engine” SAE paper 2004-01-2965
  6. Helmantel, A. Denbratt, I. “HCCI Operation of a Passenger Car DI Diesel Engine with an Adjustable Valve Train” SAE paper 2006-01-0029
  7. Lancefield, T. Methely, I. Rase, U. Kuhn, T. “The Application of Variable Event Timing to a Modern Diesel Engine” SAE paper no. 2000-01-1229
  8. Lancefield, T. “The Influence of Variable Valve Actuation on the Part Load Fuel Economy of a Modern Light-Duty Diesel Engine” SAE paper no. 2003-01-0028
  9. Tai, C. Tsao, T. Schörn, N. A. Levin, M. B. “Increasing Torque Output from a Turbodiesel with Camless Valvetrain” SAE paper no. 2002-01-1108
  10. Fessler, H. Genova Marco “An Electro-Hydraulic “Lost Motion” VVA System for a 3.0 Liter Diesel Engine” SAE paper no. 2004-01-3018
  11. Kami, R. Mavinahally, N. S. Kamo, L. Bryzik, W. Reid, M. “Emissions Comparisons of an Insulated Turbocharged Multi-cyulinder Miller Cycle Diesel Engine” SAE paper no. 980888
  12. Murata, Y. Kusaka, J. Odaka, M. Daisho, Y. Kawano, D. Suzuki, H. Ishii H. Goto, Y. “Achievement of Medium Engine Speed and Load Premixed Diesel Combustion With Variable Valve Timing” SAE paper no. 2006-01-0203
  13. Nevin, R. M. “PCCI Investigation Using Variable Intake Valve Closing in a Heavy Duty Diesel Engine” University of Wisconsin-Madison 2006
  14. Sun, Z. He, X. “Development and Control of electrohydraulic fully flexible valve actuation System for Diesel Combustion Research” SAE paper no. 2007-01-4021
  15. He, X. Donovan, M. T. Zigler, B. T. Palmer, T. R. Walton, S. M. Wooldridge, M. S. Atreya, A. “An Experimental Study of Isooctane Ignition Delay Times under HCCI Operating Conditions Using a Rapid Compression Facility” Combust. Flame 142 2005 266 275
  16. Opat, R. Ra, Y. Gonzalez, D. M. A. Krieger, R. Reitz, R. D. Foster, D. E. Durrett, R. P. Siewert, R. M. “Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light Duty Diesel Engine” SAE paper 2007-01-0193
  17. Kook, S. Bae, C. Miles, P.C. Choi, D Pickett, L.M. “The Influence of Charge Dilution and Injection Timing on Low Temperature Diesel Combustion and Emissions” SAE Paper 2005-01-3837 2005
  18. Bowman, C. T. “Kinetics of Pollutant Formation and Destruction in Combustion” Prog. Energy Combust. Sci. 1 33 45 Pergamon Press 1975
  19. Plee, S. L. Ahmad, T. Myers, J. P. “Flame Temperature Correlation for the Effects of Exhaust Gas Recirculation on Diesel Particulate and NOx Emissions” SAE Paper 811195 1981
  20. Musculus, M. P. B. “On the Correlation between NOx Emissions and Diesel Premixed Burn” SAE Paper 2004-01-1401 2004
  22. McBride, B.J. Gordon, S. Reno, M.A. October 1993

Cited By