This content is not included in your SAE MOBILUS subscription, or you are not logged in.

The Potential of Enhanced HCCI / CAI Control Through the Application of Spray Guided Direct Injection

Journal Article
2008-01-0035
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 14, 2008 by SAE International in United States
The Potential of Enhanced HCCI / CAI Control Through the Application of Spray Guided Direct Injection
Sector:
Citation: Brewster, S., Cathcart, G., and Zavier, C., "The Potential of Enhanced HCCI / CAI Control Through the Application of Spray Guided Direct Injection," SAE Int. J. Engines 1(1):13-26, 2009, https://doi.org/10.4271/2008-01-0035.
Language: English

References

  1. Chernoby, M. Hermance, D.W. Moulton, J. Oge, M.T. Smyth, J.G. Botti, J.J.M. “Hybrids vs. Diesel vs. Modified Gasoline, The Near Term - Is It Time for a Reality Check?” Panel Discussion, SAE World Congress 2005
  2. Onishi, S. Hong Jo, S. Shoda, K. Do Jo, P. Kato, S. “Active Thermo-Atmosphere Combustion (ATAC) - A New Combustion Process for Internal Combustion Engines” SAE 790501 1979
  3. Noguchi, M. Tanaka, Y. Tanaka, T. Takeuchi, Y. “A Study on Gasoline Engine Combustion by Observation of Intermediate Reactive Products during Combustion” SAE 790840 1979
  4. Najt, P. Foster, D.E. “Compression-Ignited Homogeneous Charge Combustion” SAE 830264 1983
  5. Thring, R. H. “Homogeneous-Charge Compression-Ignition (HCCI) Engines” SAE 892068 1989
  6. Aoyama, T. Hattori, Y. Mizuta, J. Sato, Y. “An Experimental Study on Premixed-Charge Compression Ignition Gasoline Engine” SAE 960081 1996
  7. Lavy, J. Dabadie, J.C. Angelberger, C. Duret, P. Willand, J. Juretzka, A. Schaflein, J. Ma, T. Lendresse, Y. Satre, A. Schulz, C. Kramer, H. Zhao, H. Damiano, L. “Innovative Ultra-low NOx Controlled Auto-Ignition Combustion Process for Gasoline Engines: the 4-SPACE Project” SAE 2000-01-1837 2000
  8. Koopmans, L. “HCCI Combustion by Retaining Residuals” 91-7291-560-9 2005
  9. Xu, H. “CHARGE and CHASE - The UK FORESIGHT VEHICLE Research on Extending HCCI Engine Operating Boundaries” HCCI Symposium Lund, Sweden 2005
  10. Heywood, J.B. “Internal Combustion Engine Fundamentals” McGraw-Hill Book Company 0-07-100499-8 1988
  11. Yamaoka, S. Kakuya, H. Nakagawa, S. Okada, T. Shimada, A. Kihara, Y. “HCCI Operation Control in a Multi-Cylinder Gasoline Engine” SAE 2005-01-0120 2005
  12. Olsson, J-O. Tunestal, P. Johansson, B. “Closed-Loop Control of an HCCI Engine” SAE 2001-01-1031 2001
  13. Brand, D. Onder, C. H. Guzzella, L. “Estimation of the Instantaneous In-Cylinder Pressure for Control Purposes Using Crankshaft Angular Velocity” SAE 2005-01-0228 2005
  14. Fuerhapter, A. Piock, W.F. Fraidl, G.K. “CSI - Controlled Auto Ignition - the Best Solution for the Fuel Consumption Versus Emission Trade-Off?” SAE 2003-01-0754 2003
  15. Larsson, S. Andersson, I. K. “An Experimental Evaluation of Torque Sensor-Based Feedback Control of Combustion Phasing in An SI Engine” SAE 2005-01-0060 2005
  16. Wagner, M. Böhme, J. F. Förster, J. “In-Cylinder Pressure Estimation from Structure-Borne Sound” SAE 2000-01-0930 2000
  17. Wilhelmsson, C. Tunestal, P. Johansson, B. “FPGA Based Engine Feedback Control Algorithms” FISITA F2006P039 2006
  18. Schten, K. Ripley, G. Punater, A. Erickson, C. “Design of an Automotive Grade Controller for In-Cylinder Pressure Based Engine Control Development” SAE 2007-01-0774 2007
  19. Gerdes, C. “Controlling HCCI with Physically-Based Models” HCCI Symposium Lund, Sweden 2005
  20. Tunestal, P. “Closed-Loop Combustion Control Activities in Lund” HCCI Symposium Lund, Sweden 2005
  21. Milovanovic, N. Blundell, D. Pearson, R. Turner, J. Chen, R. “Enlarging the Operational Range of a Gasoline HCCI Engine By Controlling the Coolant Temperature” SAE 2005-01-0157 2005
  22. Milovanovic, N. Blundell, D. Turner, J. Gedge, S. “Cam Profile Switching (CPS) and Phasing Strategy vs Fully Variable Valve Train (FVVT) Strategy for Transitions between Spark Ignition and Controlled Auto Ignition Modes” SAE 2005-01-0766 2005
  23. Stokes, J. Lake, T. Murphy, R. Osborne, R. Patterson, J. Seabrook, J. “Gasoline Engine Operation With Twin Mechanical Variable Lift (Tmvl) Valvetrain-Stage 1: Si and Cai Combustion With Port Fuel Injection” SAE 2005-01-0752 2005
  24. Li, Y. Zhao, H. Brouzos, N. Ma, T. “Parametric Study on CAI Combustion in a GDI Engine with an Air-Assisted Injector” SAE 2007-01-0196 2007
  25. Gaynor, J. A. Fleck, R. Kenny, R. G. Kee, R. J. Cathcart, G. “An Investigation of Air-Assist Injection Timings and Durations in a GDI CAI Engine” JSAE 20077136 2007
  26. Cathcart, G. Zavier, C. “Fundamental Characteristics of an Air-Assisted Direct Injection Combustion System as Applied to 4 Stroke Automotive Gasoline Engines” SAE 2000-01-0256 2000
  27. Funaioli, A. E. Achleitner, E. Baecker, H. “Direct Injection Systems for Otto Engines” SAE 2007-01-1416 2007
  28. Rassweiler, G.M. Withrow, L. “Motion Pictures of Engine Flames Correlated with Pressure Cards” SAE Journal (Trans) 42 185 204 May 1938 SAE 800131
  29. Barber, T. “MFB Calculation” Orbital Internal Report 2007
  30. Sellnau, M. C. Matekunas, F. A. “Cylinder-Pressure-Based Engine Control Using Pressure-Ratio-Management and Low-Cost Non-Intrusive Cylinder Pressure Sensors” SAE 2000-01-0932 2000

Cited By