This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Gasoline S.I. Engine Combustion and Knocking Analysis on the Mixture Formation in the Various Direct Injection Fuel Spray Patterns
Technical Paper
2006-01-0230
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The relation between in-cylinder mixture formation and combustion, i.e. knocking is investigated with using 1cylinder firing tests, CFD calculations, LIF measurements for the various direct injection fuel spray patterns. These works reveal that even in the early injection to aim homogeneous mixture, direct injection fuel spray pattern has strong influence for combustion and knocking.
Recommended Content
Authors
Topic
Citation
Suzuki, Y., Oki, H., and Kurosawa, S., "Gasoline S.I. Engine Combustion and Knocking Analysis on the Mixture Formation in the Various Direct Injection Fuel Spray Patterns," SAE Technical Paper 2006-01-0230, 2006, https://doi.org/10.4271/2006-01-0230.Also In
References
- koike Makoto Saito Akinori Tomoda Terutoshi Yamamoto Yasuhiro “Research and development of a New Direct Injection Gasoline Engine” SAE 2000-01-0530
- Kanda Mutumi Baika Toyokazu Kato Senji Iwamuro Minoru Koike Makoto Saito Akinori “Application of a New Combustion Concept to Direct Injection Gasoline Engine” SAE 2000-01-0531
- Abe Shizuo Sugiyama Masanori Kishi Hiroyuki Harada Jun “Development of a new V-6 High Performance Stoichiometric Gasoline Direct Injection Engine” 25 Internationales Wiener Motorensymposium 2004
- Eiser A. Heiduk Th. Fitzen M. Gessler J. Hatz W. “The new V-6 FSI-engine from AUDI” 25 Internationales Wiener Motorensymposium 2004
- Ortmann Rainer Raimann Stefan Arndtm Juergen Greszik Romann Wuerfel Gernot “Methods and Analysis of Fuel Injection, Mixture Preparation and Chrage Stratification in Different Direct Injected SI Engines” SAE 2001-01-0970
- Nomura Yoshihiro Miyagawa Hiroshi Fujikawa Taketoshi Tomoda Terutoshi Kubota Masato Abe Shizuo “Numerical Study of Mixture Formation and Combustion Processes in a Direct injection Gasoline Engine with Fan Shaped Spray” SAE 2001-01-0738
- Suh Edward S. Rutland Christopher J. “Numerical Study of Fuel/Air Mixture Preparation in a GDI Engine” SAE 1999-01-3657
- Bardsley M.E.A. Felton P.G. Bracco F.V. “2-D Visualization of Liquid and Vapor Fuel in an I.C. Engine” SAE 880521
- Lawrenz W. Koehler J. Meier F. Stolz W. Worth R. Bloss W.H. maly R.R. Wagner E. Zahn M. “Quantitative 2D LIF Measurements of Air/Fuel Ratios During the Intake Stroke in a Transparent SI Engine” SAE 922320
- Shimizu Rio Matumoto Seiichi Furuno Shigeo Murayama Motohide Kojima Shiniji “Measurement of Air-Fuel Mixture Distribution in a Gasoline Engine Using LIEF Technique” SAE 922356
- Takagi Masahide Miriyoshi Yasuo “Modeling of a hollow-cone spray at different ambient pressures” The International Journal of Engine Research Dec. 2003
- Heywood J.B “Internal combustion engine fundamentals” McGraw-Hill Book Co. 1988
- Moriyoshi Yasuo Morikawa Hideaki kamimoto Takeyuki “Analysis of Flame Propagation Phenomenon in Simplified stratified Charge Conditions” JSAE 9740343
- halstead M.P. Kirsch L.J. Quinn C.P. “The Autoignition of Hydrocarbon Fuels at High Temperatures and Pressures- Fitting of a Mathematical Model” Combustion and Flame 30 45 60 1977
- Schepertoens H. Lee W. “Multidimensional Modeling of Knocking Combustion in SI Engines” SAE 850502
- Teraji Atsushi Tsuda Tsuyoshi noda Toru Kubo Masaaki Itoh Teruyuki “Development of a Three Dimensional Knocking Simulation for a Spark Ignition Engines” JSAE 20035629