This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Analysis of Loop Scavenging Process in a Small Power SI Two-Stroke Engine
Technical Paper
2002-01-2181
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The paper concerns to the filling efficiency in spark ignition two-stroke engines of small power with loop-scavenged system. Amount of lost fresh charge to exhaust system has been presented. By changing of geometrical dimensions of transfer and exhaust ports scavenge efficiency, delivery ratio and exhaust loss of fresh charge can be changed. Full analysis of mass flow rate of air-fuel mixture and exhaust gases was conducted. Comparison of velocity vectors in an opened cylinder by means of finite element method in a CFD-program and during measurement is shown in graphs. There was obtained a big conformity of results from experimental research and calculation, which allowed carrying out the spatial analysis of fresh charge distribution in the cylinder in dependence on shape of combustion chamber. Principally geometry of ports and combustion chamber influence on emission of unburned hydrocarbons in exhaust system. For simulation test zero- and one-dimensional model of thermodynamic processes in engine, inlet and outlet systems were used. In the paper dependences of different scavenge factors were shown as a function of geometrical parameters of the engine ports. In conclusions there were given some indications, how to decrease exhaust losses of fresh charge by change of engine ports.
Recommended Content
Citation
Mitianiec, W., "Analysis of Loop Scavenging Process in a Small Power SI Two-Stroke Engine," SAE Technical Paper 2002-01-2181, 2002, https://doi.org/10.4271/2002-01-2181.Also In
References
- BLAIR G.P. Design and Simulation of Two-Stroke Engines SAE R-61 1996
- BLAIR G.P. KENNY R.G. Further Developments in Scavenging Analysis for Two-Cycle Engines SAE Congress and Expositions Detroit 1980
- BLAIR G.P. Studying Scavenge Flow in a Two-Stroke Cycle Engine SAE Off-Highway Vehicle Meeting Milwaukee 1975
- AHMADI-BEFRUI B. BRANDSTATTER W. KRATOCHWILL H. Multidimensional Calculation of the Flow Processes in a Loop Scavenged Two-Stroke Cycle Engine SAE International Congress and Exposition Detroit 1989 SAE Pap. No 890841
- CHEN Ch. VESHAGH A. A Comparison Between Alternative Methods for Gas Flow and Performance Prediction of Internal Combustion Engines SAE Tech.Pap., 921734
- JANTE A. Zu einigen Entwicklungsproblemen des Verbrennungsmotors Automobil-Industrie
- MITIANIEC W. JAROSZEWSKI A. Mathematical models of physical processes in internal combustion engines of small power (in polish) Ossolineum Wroclaw-Warszawa-Kraków 1993
- MITIANIEC W. Chosen calculation methods of non-steady gas flow in pipes of internal combustion engine (in polish) Science Workbook of Cracow University of Technology 1994
- OKA T. ISHIHARA S. Relation Between Scavenging Flow and Its Efficiency of a Two-Stroke Cycle Engine Bulletin of the JSME 14 69 1971
- RYCHTER T. TEODORCZYK A. Mathematical modeling of working cycle of piston engine (in polish) PWN Warszawa 1990
- SEIFERT H. Erfahrungen mit Einem Mathematischen Modell zur Simulation von Arbeitsverfahren in Verbrennungsmotoren MTZ 1978 39 12 567 572
- ROSSKAMP H. KIMMEK A. PRETZSCH P. MUGELE M. Scavenge Loss Mechanisms and Their Driving Forces in Loop Scavenged High Performance Two-Stroke Engines Small Engine Technology Conference Pisa 2001 SAE Paper 2001 01 1826/4247
- DRECQ D. BENTEYN P.E. GARDIN, CONTE T. Emission and Consumption Reduction for Small Two-Stroke Gasoline Engine Small Engine Technology Conference Pisa 2001 SAE Paper 2001 01 1827/4248
- PAYRI F. CLIMENT H. PASTOR J.M. GAIA C. Optimisation of the Scavenging and Injection Processes of an Air-Assisted Direct Fuel Injection 50 cc 2-Stroke S.I. Engine by Means of Modelling Small Engine Technology Conference Pisa 2001 SAE Paper 2001 01 1814/4234
- LUDWIG J. QIN H.Q. SPALDING D.B. PHOENICS Reference Manual TR200 CHAM London 1998
- EKENBERG M. JOHANSSON B. The Effect of Transfer Port Geometry on Scavenge Flow Velocities at High Engine Speed SAE Paper 960366 International SAE Congress and Exposition Detroit 1996
- RAGHUNATHAN B.D. KENNY R.G. Simulation and Validation of the Flow within a Motored Two-Stroke Engine SAE Paper 970359 International SAE Congress and Exposition Detroit 1997
- ZAHN W. ROSSKAMP H. RAFFENBERG H. KLIMMEK A. Analysis of a Stratified Charging Concept for High-Performance Two-Stroke Engines SAE Paper 2000-01-0900 International SAE Congress and Exposition Detroit 2000