This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Surface Modification Design: Carburizing With Atmospheres
Technical Paper
2002-01-1505
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Atmosphere carburizing remains one of the most important surface treatment technologies throughout the world. In this paper, various important metallurgical design variables are identified by examining the results of the carburisation of 15HN steel. These results showed the importance of the formation of martensite-retained austenite-carbide microstructure after hardening. Increasing austenization temperature causes a decrease in the carbide fraction and an increase in the fraction of retained austenite. By optimisation of the composition of these microstructures through variation of carburisation process, hardening, and tempering variables, it is possible to optimise compressive stresses, abrasive wear resistance, and contact fatigue resistance.
Authors
Citation
Przyłęcka, M., Gęstwa, W., and Totten, G., "Surface Modification Design: Carburizing With Atmospheres," SAE Technical Paper 2002-01-1505, 2002, https://doi.org/10.4271/2002-01-1505.Also In
References
- Przyłęcka M. Gęstwa W. Modelowanie struktury i własności nawęglanych i azotonawęglanych stali chromowo-niklowych Inżynieria Materiałowa 4 105 lipiec-sierpień 1998 703 706
- Przyłęcka M. Materiałowo - technologiczne aspekty trwałości łożysk tocznych Politechnika Poznańska, Seria Rozprawy Nr202, Poznań 1988 103
- Przyłęcka M. Gęstwa W. Wpływ nowoczesnych ośrodków chłodzących na strukturę i własności warstw nawęglanych lub azotonawęglanych wytworzonych na stalach konstrukcyjnych Inżynieria Materiałowa 6 119 listopad-grudzień 2000 407 410
- Przyłęcka M. Gęstwa W. Totten G.E. The modelling of structure and properties of carburizing or carbonitriding layers, as well as hardening in different quenching mediums Heat Treating proceedings of the 20th Conference 9-12 October 2000 St.Louis, Missouri, USA 624 634
- Przyłęcka M. Gęstwa W. Wpływ stanu strukturalnego na niektóre własności użytkowe warstw nawęglonych lub azotonawęglanych wytworzonych na stalach konstrukcyjnych Zeszyty naukowe Politechniki Świętokrzyskiej, Mechanika 72, Kielce 2000 97 117
- Przyłęcka M. The modeling of structure and properties of carburized low-chromium hypereutectoid steels Journal of Materials Engineering and Performance, ASM International, Materials Park, Ohio, Journal of Materials Engineering and Performance 5 2 1996
- Gęstwa W. Azotonawęglanie wybranych stopów Fe-Cr-Mn-Si Praca doktorska, Politechnika Poznańska, Poznań 1997
- Przyłęcka M. Gęstwa W. The Modeling of Residual Stresses after Direct Hardening of Carburized and Carbonitrided Low-Chromium Hypereutectoid Steels (ŁH15) “MAT-TEC 97”, “Analysis of residual stresses from materials to bio-materials”, IITT International 1997
- Peyre J.P. Tournier C. Choix des traitements thermiques superficiels Center technique des Industries Mécaniques, Paris 1985
- Przyłęcka M. Gęstwa W. The modeling residual stresses of carburizing chromium and chromium-nickel of constructional steels after quenching mediums 3rd International Conference On Quenching And Control Of Distortion ASM 24-26.03.1999 Praga, Czechy 340 351
- Przyłęcka M. Gęstwa W. The modeling residual stresses of carbonitriding chromium and chromium-nickel steels after quench hardening in different quehching mediums 3rd International Conference On Quenching And Control Of Distortion ASM 24-26.03.1999 Praga, Czechy 542 553
- Przyłęcka M. Gęstwa W. Naprężenia własne a twardość i zużycie cierne azotonawęglanej lub nawęglanej stali 12HN3A Inżynieria Materiałowa 5 112 1999 510 514
- Grysa K. Przyłęcka M. Przyłęcki Z. Pole temperatury w badaniach zużycia ciernego materiałów metalowych Prace Badawcze Komisji Technologii Budowy Maszyn PAN Oddział w Poznaniu, z.2 1981 125 140
- Lesage J. Chicot D. Przyłęcka M. Kulka M. Gęstwa W. Role du chrome sur la cementation Hyper-Austenitique d'un acier a roulement Traitement Thermique 276 1994 42 46
- Gęstwa W. Przyłęcka M. Kulka M. Wpływ dodatku amoniaku do atmosfery nawęglającej na wyniki procesu węgloazotowania Archiwum Technologii Budowy Maszyn, z.13, Poznań 1994 111 121
- Przyłęcka M. Gęstwa W. Modelowanie naprężeń własnych w zahartowanej nawęglonej i azotonawęglonej niskochromowej stali nadeutektoidalnej (ŁH15) Inżynieria Powierzchni 2 czerwiec 1999 31 37
- Gęstwa W. Przyłęcka M. Kulka M. The influence of carbonitriding and heat treatment on the properties or low- and highcarbon steels The Second ASM Heat Treatment And Surface Engineering Proceedings And Exhibition In Europe Dortmund (Germany) Westfallenhallen 1÷3 June 1993 239 246
- Pertek A. Przyłęcka M. Pomiary naprężeń własnych metodą mechaniczną w nawęglonych stalach łożyskowych Seminarium “Metodyczne problemy pomiarów naprężeń własnych” Poznań-Puszczykowo 1-2 XII 1994
- Lesage J. Chicot D. Al Karaischi M. Role of microstructure and residual stresses on fatigue crack propagation in carbonitrided steels Steel Research 60 8 1989 370 374
- Parrish G. The Influence of Microstructure on the Properties of Case-Carburized Components American Society for Metals Metals Park, Ohio 44073 1980 193
- Nosov V.B. Yurasov S.A. Raschyet prokalivayemosti konstrukcionnyh stalyey po hemicheskom sostavu Metallovedenie i Termicheskaya Obrabotka Metallov 1 1995 19 24
- Burakowski T. Wierzchoń T. Surface Enginnering of Metals CRC Series in Materials Science and Technology CRC Press New York 1999
- Priestner R. Glover S.G. Stabilisation Effect in a High Carbon Nickel Steel Physical Properties of Martensite and Bainite; Special report 93 The Iron and Steel Institute 1965 38 42
- Mendiratta M.G. Sasser J. Krauss G. Effect of dissolved carbon on microcracking in martensite of an Fe-1,39C alloy Metal. Transactions 62 1969 351 353
- Krauss G. Steels : Heat Treatment and Processingprinciples ASM International Materials Park, Ohio44073 ISBN 0-87170-370-X 500
- Apple F.A. Krauss G. Microcraking and fatigue in carburized steel Metal. Transactions 4 1973 1195 1200
- Krauss G. The microstructure and fatigue of carburized steel Metal. Transactions 9A 1978 1527 1535
- Degallaix G. Chicot D. Baralis J. Lesage J. Modéle simplifié contraintes résiduelles dans les couches traités superficiellement Memoires et Études Scientifiques Revue de Métallurgiee Féviev 1990 113 122
- Szpunar E. Beilanik J. Influence of Retained Austenite on Propagation of Fatigue, Cracks in Carburised Cases of Toothed Elements Heat Treatment '84, The Metals Society 39.1 39.9
- Richman R.H. Landgraf R.W. Some Effects of Retained Austenite on the Fatigue Resistance of Carburized Steel Metall. Trans. A. 6 May 1975 955 964
- Johnson R.J. The Role of Nickel in Carburizng Steels Publication A 1205 International Nickel Company, Inc.
- Yen X. Zhu D. Shi D. The Stress Induced Phase Transformation of Carburising and Carbonitrided Layers and Their Contact Fatigue Behaviour Heat Treat. Met. (China) 1 1984 31 37
- Franklin J. Hill P. Allen C. The Effect of Heat Treatment on Retained Austenite in 1% Carbon-Chromium Bearing Steel Heat Treat. Met. 2 1979 46 50
- Koistinen DP. The Distribution of Residual Stresses in Carburised Cases and Their Origin Trans. ASM 50 1958 227 241
- Diesburg D.E. Kim C. Fairhurst W. Microstructural and Residual Stress Effects on the Fracture of Case-Hardened Steels paper 23 Heat Treatment '81 (University of Aston), The Metals Society Sept 1981
- Wiegand K Tolasch G. The Combined Effect of Individual Factors on Raising the Alternating Bending Fatigue Strength of Case-Hardened Test Pieces Härterei-Technische Mitteilungen (BISI 6081) 22 Oct 1967 213 220
- Razim C. Influence of Residual Austenite on the Strength Properties of Case-Hardened Test Pieces during Fatiguing Härterei-Technische Mitteilungen (BISI 6448) 23 April 1968 1 8
- Brugger H. Werkstoff und Wärmebehandlungseinflüsse auf die Zahafußtragfahigkeit VDI-Berichte 195 1973 135 144
- Pacheco J.L. Krauss G. Microstructure and High Bending Fatigue Strength of Carburised Steel J.Heat Treat. 7 2 1989 77 86
- Zaconne M.A. Kelley J.B. Krauss G. Strain Hardening and Fatigue of Simulated Case Microstructure in Carburised Steel Conf. Proc. Processing and Performance Lakewood, CO ASM International July 1989
- Kozyrev G.V. Toporov G.V. Effect of Retained Austenite on the Impact-Fatigue Strength of Steel Metal Sci. Heat Treat. 15 12 Dec 1973 1064 1066
- Panhans M.A. Fournelle R.A. High Cycle Fatigue Resistance of AISI E 9310 Carburised Steal with Two Different Levels of Retained Austenite and Surface Residual Stress J. Heat Treat. 2 1 1981 54 61
- Razim C. Effects of Residual Austenite and Recticular Carbides on the Tendency to Pitting of Case Hardened Steels, thesis Techn. Hochschule Stuttgart 1967
- Balter M.A. Turovskii M.L. Resistance of Case-Hardened Steel to Contact Fatigue Met. Sci. Heat Treat. 3 March 1966 177 180
- Diament A. El Haik R. Lafont R. Wyss R. Surface Fatigue Behaviour of the Carbonitrided and Case-Hardened Layers in Relation to the Distribution of the Residual Stresses and the Modifications of the Crystal Lattice Occurring during Fatigue (BISI 12455) 25th Colloquc Int. Caen, France 29 – 31 May 1974 International Federation for the Heat Treatment of Materials 1974
- Vinokur B.B. Kondratyuk S.E. Markovskaya L.I. Khrunik R.A. Gurmaza A.A. Vainerman V.B. Effect of Retained Austenite on the Contact Fatigue Strength of Carburizęd Steel Met. Sci. Heat Treat. 11 Nov 1978 47 49
- Vinokur B. The Composition of the Solid Solution Structure and Contact Fatigue of the Case-Hardened Layer Metall. Trans. A 24 May 1993 1163 1168
- Bárczy P. Takács J. Endurance Improvements of Planet Gear Pins by Heat Treatment, paper 24, Heat Treatment '84 The Metals Society 1984
- Hahn G.T. Bhargava V. Rubin C.A. Leng X. Analysis of the Effects of Hardened Layers on Rolling and Sliding Contact Performance Conf. Pmc. Processing and Performance Lakewood, CO ASM International 1989
- Razim C. Survey of Basic Facts of Designing Case Hardened Components 1980
- Thoden B. Grosch J. Crack. Resistance of Carburised Steel under Bend Stress Conf. Proc. Procesing and Performce Lakewood, CO ASM International 1983
- Sharma V.K. Walter G.H. Breen D H. The Effect of Alloying Elements on Case Toughness of Automotive Gear Steels Heat Treatment'87, The Metals Society 1997
- Niemann G. Seitzinger A. Calculation of Scoring Resistance for Spur and Helical Gears ISO 6336, International Standars Organization 1996
- Matveevsky R.M. Sinaisky V.M. Buyanovsky I.A. Contributions to the Influence of Retained Austenite Content in Steels on the temperature Stability of Boundary Lubricant layers in Fraction J.Lubr: Technol. (Trans. ASME) July 1975 512 515
- Grew W. Cameron A. Role of Austenite and Mineral Oil in Lubricant Failure Nature 217 5127 3 Feb 1968
- Kozlovski I.I. Manevskii S.E. Sokolov I.I. Effect of Reteined Austenite on the Resistance to Scoring of Steel 20Kh2N4A Met. Sci. Heat Treat. 1 1978 70 80
- Manevskii S.E. Sokolov I.I. Resistance to Seizing of Carburized and Carbon Nitrided Steels Metalloved. Term. Obrab. Met. 4 Aprill 1977 66 68
- Terauchi S. Takehara J.I. On the Effect of Metal Structure on Scoring Limit Bull. Jpn. Soc. Mech. Eng. 21 152 Feb 1978 324 332
- Razim C. Restaustenit-zum Kenntnisstand über Ursache und Auswirkungen bei einsatzgehärteten Stählen HTM 40 1985 4 150 165
- Denis S. Simon A. Beck G. Estimation of the Effect Stress/Phase Transformation Interaction when Calculating Internal Stress during Martensitic Quenching of Steel Trans. ISIJ 22 1982 504 513
- Stickels C. A. Carbide refining Heat Treatment for 52100 Bearing Steel Met. Trans. 5 1974 865 874
- Winokur B. B. i in. Vlijane ostatocnogo austenita na konataktnuju vynoslivost cementujennoj stali Met. i Term. Obr. Met. 11 1978 47 49
- Meyzaud Y. Sauzay C. Traitement thermique et austénite résiduelle Traitement Thermique, 61-74 1994 33 42
- Parrish G. Carburizing – Microstructures and Properties December 1999 American Society for Metals International Metals Park, Ohio 44073 ISBN:0-87170-666-0 247
- Totten G.E. Howes M.A.H. Steel Heat Treatment Handbook Marcel Dekker, Inc. ISBN:0-8247-9750-7 1192
- Shaw B.A. Abudaia F.B. Evans J.T. Chracterization of retained austenite in case carburised gears and its influence on fatigue performance Heat Treating proceedings of the 20th Conference 9-12 October 2000 St.Louis, Missouri, USA 62 69
- Edmonds D.V. The use of retained austenite in the study of phase transformations Heat Treating proceedings of the 20th Conference 9-12 October 2000 St.Louis, Missouri, USA 479 490