Open Access

Ducted Fuel Injection: A Numerical Soot-Targeted Duct Geometry Optimization

Journal Article
03-15-02-0014
ISSN: 1946-3936, e-ISSN: 1946-3944
Published September 14, 2021 by SAE International in United States
Ducted Fuel Injection: A Numerical Soot-Targeted Duct Geometry Optimization
Sector:
Citation: Millo, F., Piano, A., Peiretti Paradisi, B., Segatori, C. et al., "Ducted Fuel Injection: A Numerical Soot-Targeted Duct Geometry Optimization," SAE Int. J. Engines 15(2):2022, https://doi.org/10.4271/03-15-02-0014.
Language: English

References

  1. Janssen , N.A. , Gerlofs-Nijland , M.E. , Lanki , T. et al. Health Effects of Black Carbon Copenhagen WHO 2012
  2. Bond , T.C. , Doherty , S.J. , Fahey , D. et al. Bounding the Role of Black Carbon in the Climate System: A Scientific Assessment J. Geophys. Res. Atmos. 118 11 2013 5380 5552 https://doi.org/10.1002/jgrd.50171
  3. Miller , J. and Jin , L. Global Progress toward Soot-Free Diesel Vehicles in 2019 ICCT Xi’an, China 2019
  4. Brizi , G. , Postrioti , L. , and van Vuuren , N. Experimental Analysis of SCR Spray Evolution and Sizing in High-Temperature and Flash Boiling Conditions SAE Int. J. Fuels Lubr. 12 2 2019 87 107 https://doi.org/10.4271/04-12-02-0006
  5. Millo , F. , Rafigh , M. , Sapio , F. et al. Modeling NOx Storage and Reduction for a Diesel Automotive Catalyst Based on Synthetic Gas Bench Experiments Ind. Eng. Chem. Res. 57 27 2018 12335 12351 https://doi.org/10.1021/acs.iecr.8b01813
  6. Patterson , M.A. , Kong , S.C. , Hampson , G.J. , and Reitz , R.D. Modeling the Effects of Fuel Injection Characteristics on Diesel Engine Soot and NOx Emissions SAE Technical Paper 940523 1994 https://doi.org/10.4271/940523
  7. Musculus , M.P.B. , Miles , P.C. , and Pickett , L.M. Conceptual Models for Partially Premixed Low-Temperature Diesel Combustion Prog. Energy Combust. Sci. 39 2013 246 283 https://doi.org/10.1016/j.pecs.2012.09.001
  8. Fuquan , Z. , Assanis , D.N. , Asmus , T.N. , Dec , J. et al. Homogeneous Charge Compression Ignition (HCCI) Engines: Key Research and Development Issues Warrendale, PA Society Automotive Engineers 2003
  9. Reitz , R.D. and Duraisamy , G. Review of High Efficiency and Clean Reactivity Controlled Compression Ignition (RCCI) Combustion in Internal Combustion Engines Prog. Energy Combust. Sci. 46 2015 12 71 https://doi.org/10.1016/j.pecs.2014.05.003
  10. Kamimoto , T. and Bae , M.H. High Combustion Temperature for the Reduction of Particulate in Diesel Engines SAE Technical Paper 880423 1988 https://doi.org/10.4271/880423
  11. Pickett , L.M. and Siebers , D.L. Non-Sooting, Low Flame Temperature Mixing-Controlled DI Diesel Combustion SAE Technical Paper 2004-01-1399 2004 https://doi.org/10.4271/2004-01-1399
  12. Polonowski , C. , Mueller , C. , Gehrke , C. , Bazyn , T. et al. An Experimental Investigation of Low-Soot and Soot-Free Combustion Strategies in a Heavy-Duty, Single-Cylinder, Direct-Injection, Optical Diesel Engine SAE Int. J. Fuels Lubr. 5 1 2012 51 77 https://doi.org/10.4271/2011-01-1812
  13. Mueller , C.J. , Nilsen , C.W. , Ruth , D.J. et al. Ducted Fuel Injection: A New Approach for Lowering Soot Emissions from Direct-Injection Engines Appl. Energy 204 2017 206 220 https://doi.org/10.1016/j.apenergy.2017.07.001
  14. Gehmlich , R.K. , Mueller , C.J. , Ruth , D.J. et al. Using Ducted Fuel Injection to Attenuate or Prevent Soot Formation in Mixing-Controlled Combustion Strategies for Engine Applications Appl. Energy 226 2018 1169 1186 https://doi.org/10.1016/j.apenergy.2018.05.078
  15. Nilsen , C.W. , Biles , D.E. , and Mueller , C.J. Using Ducted Fuel Injection to Attenuate Soot Formation in a Mixing-Controlled Compression Ignition Engine SAE Int. J. Engines 12 3 2019 309 322 https://doi.org/10.4271/03-12-03-0021
  16. Nilsen , C.W. , Biles , D.E. , Yraguen , B.F. , and Mueller , C.J. Ducted Fuel Injection versus Conventional Diesel Combustion: An Operating-Parameter Sensitivity Study Conducted in an Optical Engine with a Four-Orifice Fuel Injector SAE Int. J. Engines 13 3 2020 345 362 https://doi.org/10.4271/03-13-03-0023
  17. Nilsen , C.W. , Biles , D.E. , Yraguen , B.F. , and Mueller , C.J. Ducted Fuel Injection vs. Conventional Diesel Combustion: Extending the Load Range in an Optical Engine with a Four-Orifice Fuel Injector SAE Int. J. Engines 14 1 2021 47 58 https://doi.org/10.4271/03-14-01-0004
  18. Li , F. , Lee , C. , Wu , H. et al. An Optical Investigation on Spray Macroscopic Characteristics of Ducted Fuel Injection Exp. Therm. Fluid Sci. 109 2019 109918 https://doi.org/10.1016/j.expthermflusci.2019.109918
  19. Li , F. , Lee , C. , Wang , Z. et al. Optical Investigation on Impacts of Ambient Pressure on Macroscopic Spray Characteristics of Ducted Fuel Injection under Non-Vaporizing Conditions Fuel 268 5 2020 117192 https://doi.org/10.1016/j.fuel.2020.117192
  20. Li , F. , Lee , C. , Wang , Z. et al. Schlieren Investigation on Impacts of Duct Size on Macroscopic Spray Characteristics of Ducted Fuel Injection Appl. Therm. Eng. 176 8 2020 115440 https://doi.org/10.1016/j.applthermaleng.2020.115440
  21. Svensson , K.I. and Martin , G.C. Ducted Fuel Injection: Effects of Stand-Off Distance and Duct Length on Soot Reduction SAE Int. J. Adv. Curr. Pract. in Mobility 1 3 2019 1074 1083 https://doi.org/10.4271/2019-01-0545
  22. Fitzgerald , R.P. , Svensson , K. , Martin , G. , Qi , Y. et al. Early Investigation of Ducted Fuel Injection for Reducing Soot in Mixing-Controlled Diesel Flames SAE Int. J. Engines 11 6 2018 817 833 https://doi.org/10.4271/2018-01-0238
  23. Tanno , S. , Kawakami , J. , Kitano , K. , and Hashizume , T. Investigation of a Novel Leaner Fuel Spray Formation for Reducing Soot in Diffusive Diesel Combustion-Homogenizing Equivalence Ratio Distribution in the Lift-Off Region SAE Technical Paper 2019-01-2273 2019 https://doi.org/10.4271/2019-01-2273
  24. Nilsen , C.W. , Yraguen , B.F. , Mueller , C.J. , Genzale , C. et al. Ducted Fuel Injection vs. Free-Spray Injection: A Study of Mixing and Entrainment Effects Using Numerical Modeling SAE Int. J. Engines 13 5 2020 705 715 https://doi.org/10.4271/03-13-05-0044
  25. Millo , F. , Piano , A. , Peiretti Paradisi , B. et al. Ducted Fuel Injection: Experimental and Numerical Investigation on Fuel Spray Characteristics, Air/Fuel Mixing and Soot Mitigation Potential Fuel 289 2021 119835 https://doi.org/10.1016/j.fuel.2020.119835
  26. Millo , F. , Segatori , C. , Piano , A. , Peiretti Paradisi , B. et al. An Engine Parameters Sensitivity Analysis on Ducted Fuel Injection in Constant Volume Vessel Using Numerical Modeling SAE Technical Paper 2021-24-0015 2021 https://doi.org/10.4271/2021-24-0015
  27. Piano , A. , Millo , F. , Postrioti , L. , Biscontini , G. et al. Numerical and Experimental Assessment of a Solenoid Common-Rail Injector Operation with Advanced Injection Strategies SAE Int. J. Engines 9 1 2016 565 575 https://doi.org/10.4271/2016-01-0563
  28. Richards , K.J. , Senecal , P.K. , and Pomraning , E. 2018
  29. Yakhot , V. and Orszag , S.A. Renormalization Group Analysis of Turbulence. I. Basic Theory J. Sci. Comput. 1 1 1986 3 51 https://doi.org/10.1007/BF01061452
  30. Reitz , R.D. and Diwakar , R. Structure of High-Pressure Fuel Sprays SAE Technical Paper 870598 1987 https://doi.org/10.4271/870598
  31. Amsden , A.A. , O’Rourke , P.J. , and Butler , T.D. 1989
  32. Reitz , R.D. and Bracco , F.V. Mechanisms of Breakup of Round Liquid Jets Encyclopedia of Fluid Mechanics Houston Gulf Pub. Co., Book Division 1986 https://inis.iaea.org/search/search.aspx?orig_q=RN:19041515
  33. Liu , A.B. , Mather , D. , and Reitz , R.D. Modeling the Effects of Drop Drag and Breakup on Fuel Sprays SAE Technical Paper 930072 1993 https://doi.org/10.4271/930072
  34. Naber , J.D. and Reitz , R.D. Modeling Engine Spray/Wall Impingement SAE Technical Paper 880107 1988 https://doi.org/10.4271/880107
  35. Amsden , A.A. and Findley , M. KIVA-3V: A Block-Structured KIVA Program for Engines with Vertical or Canted Valves Washington, DC US Department of Energy 1997
  36. Zeuch , T. , Moréac , G. , Ahmed , S.S. , and Mauss , F. A Comprehensive Skeletal Mechanism for the Oxidation of n-Heptane Generated by Chemistry-Guided Reduction Combust. Flame 155 4 2008 651 674 https://doi.org/10.1016/j.combustflame.2008.05.007
  37. Mauss , F. Entwicklung eines kinetischen Modells der Rußbildung mit schneller Polymerisation Göttingen Cuvillier 1997
  38. Kazakov , A. and Frenklach , M. Dynamic Modeling of Soot Particle Coagulation and Aggregation: Implementation with the Method of Moments and Application to High-Pressure Laminar Premixed Flames Combust. Flame 114 1998 484 https://doi.org/10.1016/S0010-2180(97)00322-2
  39. Siebers , D. and Higgins , B. Flame Lift-Off on Direct-Injection Diesel Sprays under Quiescent Conditions SAE Technical Paper 2001-01-0530 2001 https://doi.org/10.4271/2001-01-0530
  40. Higgins , B. and Siebers , D. Measurement of the Flame Lift-Off Location on DI Diesel Sprays Using OH Chemiluminescence SAE Technical Paper 2001-01-0918 2001 https://doi.org/10.4271/2001-01-0918
  41. Rhim , D.R. and Farrell , P.V. Characteristics of Air Flow Surrounding Non-Evaporating Transient Diesel Sprays SAE Technical Paper 2000-01-2789 2000 https://doi.org/10.4271/2000-01-2789

Cited By