Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Development and Validation Procedure of a 1D Predictive Model for Simulation of a Common Rail Fuel Injection System Controlled with a Fuel Metering Valve

Journal Article
03-11-04-0027
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/03-11-04-0027
Published July 10, 2018 by SAE International in United States
Development and Validation Procedure of a 1D Predictive Model for Simulation of a Common Rail Fuel Injection System Controlled with a Fuel Metering Valve
Sector:
Citation: Ferrari, A., Pizzo, P., and Vitali, R., "Development and Validation Procedure of a 1D Predictive Model for Simulation of a Common Rail Fuel Injection System Controlled with a Fuel Metering Valve," SAE Int. J. Engines 11(4):401-422, 2018, https://doi.org/10.4271/03-11-04-0027.
Language: English

References

  1. Wang , M. , Ouyang , G. , and Zhou , J. Simulation and Experimental Study on High-Pressure Common Rail Fuel System of Diesel Engine Proceedings of the International Conference on Computer Distributed Control and Intelligent Environmental Monitoring 2011 586 589
  2. Sun , Z.Y. , Li , G.X. , Chen , C. , Yu , S.Y. et al. Numerical Investigation on Effects of nozzle’s Geometric Parameters on the Flow and the Cavitation Characteristics within Injector’s Nozzle for a High-Pressure Common-Rail DI Diesel Engine Energy Conversion and Management 89 843 861 2015
  3. Mohan , B. , Yang , W. , Tay , K.I. , and Yu , W. Experimental Study of Spray Characteristics of Biodiesel Derived from Waste Cooking Oil Energy Conversion and Management 88 622 632 2014
  4. Huber , B. and Ulbrich , H. Modeling and Experimental Validation of the Solenoid Valve of a Common Rail Diesel Injector SAE Technical Paper 2014-01-0195 2014 10.4271/2014-01-0195
  5. Matsumoto , S. , Yamada , K. , and Date , K. Concepts and Evolution of Injector for Common Rail System SAE Technical Paper 2012-01-1753 2012 10.4271/2012-01-1753
  6. Ferrari , A. and Mittica , A. FEM Modeling of the Piezoelectric Drive System in the Design of Direct-Acting Diesel Injectors Applied Energy 99 471 483 2012
  7. Rolf , L. , Parche , M. , Alvarez-Avila , C. , Krauß , J. et al. Pressure-Amplified Common Rail System for Commercial Vehicles MTZ Worldw 70 5 10 15 2009
  8. Busch , S. , Zha , K. , and Miles , P.C. Investigations of Closely Coupled Pilot and Main Injections as a Means to Reduce Combustion Noise in a Small-Bore Direct-Injection Diesel Engine International Journal of Engine Research 16 1 13 22 2015
  9. Lee , J.W. , Choi , S.M. , Yu , S. , Choi , H. et al. Comparison of the Effects of Multiple Injection Strategy on the Emissions between Moderate and Heavy EGR Rate Conditions: Part 1 - Pilot Injections Journal of Mechanical Science and Technology 27 4 1135 1141 2013
  10. O’Connor , J. and Musculus , M. Post Injections for Soot Reduction in Diesel Engines: A Review of Current Understanding SAE Int. J. Engines 6 1 400 421 2013
  11. Payri , F. , Broatch , A. , Salavert , J.M. , and Martín , J. Investigation of Diesel Combustion using Multiple Injection Strategies for Idling after Cold Start of Passenger-Car Engines Experimental Thermal and Fluid Science 34 857 865 2010
  12. Torregrosa , A.J. , Broatch , A. , Garcia , A. , and Monico , L.F. Sensitivity of Combustion Noise NO and Soot Emissions to Pilot Injection in PCCI Diesel Engines Applied Energy 104 149 157 2013
  13. d’Ambrosio , S. and Ferrari , A. Potential of Double Pilot Injection Strategies Optimized with the Design of Experiments Procedure to Improve Diesel Engine Emissions and Performance Applied Energy 155 918 932 2015
  14. Pogulyaev , Y.D. , Baitimerov , R.M. , and Rozhdestvenskii , Y.V. Detailed Dynamic Modelling of Common Rail Piezo Injector Procedia Engineering 129 93 98 2015
  15. Wang , P. , Zheng , D. , and Tian , Y. High Pressure Common Rail Injection System Modelling and Control ISA Transactions 63 265 273 2016
  16. Payri , R. , Salvador , F.J. , Carreres , M. , and de la Morena , J. Fuel Temperature Influence Energy Conversion and Management 114 376 391 2016
  17. Lino , P. , Maione , B. , and Rizzo , A. Nonlinear Modelling and Control of a Common Rail Injection System for Diesel Engines Applied Mathematical Modelling 31 1770 1784 2007
  18. Salvador , F.J. , Hoyas , S. , Novella , R. , and Martinez-Lopez , J. Numerical Simulation and Extended Validation of Two-Phase Compressible Flow in Diesel Injector Nozzles Proc Inst Mech Eng Part D: J Automobile Eng 225 4 545 563 2011
  19. Sun , Z.Y. , Li , X. , Chen , C. , Yu , Y.S. et al. Numerical Investigation on Effects of Nozzle’s Geometry Parameters on the Flow and the Cavitation Characteristics within Injector’s Nozzle for a Pressure Common-Rail DI Diesel Engine Energy Conversion and Management 89 1 843 861 2015
  20. Catania , A.E. , Ferrari , A. , and Manno , M. Development and Application of a Complete Multijet Common-Rail Injection-System Mathematical Model for Hydrodynamic Analysis and Diagnostics ASME Transactions, Journal of Engineering for Gas Turbines and Power 130 0628091 06280913 2008
  21. Salvador , F.J. , Plazas , A.H. , Gimeno , J. , and Carreres , M. Complete Modelling of a Piezo Actuator Last-Generation Injector for Diesel Injection Systems International Journal of Engine Research 15 1 3 19 2014
  22. Ferrari , A. , Mittica , A. , and Spessa , E. Benefits of Hydraulic Layout over Driving Systems in Piezo-Injectors and Proposal of a New-Concept CR Injector with an Integrated Minirail Applied Energy 103 245 253 2013
  23. Payri , R. , Salvador , F.J. , Marti-Aldiravì , P. , and Martinez-Lopez , J. Using One-Dimensional Modeling to Analyse the Influence of the Use of Biodiesels on the Dynamic Behaviour of Solenoid-Operated Injectors in Common Rail Systems: Detailed Injection System Model Energy Conversion and Management 54 1 90 99 2012
  24. Gauthier , C. , Sename , O. , Dugard , L. , and Meissonnier , G. Modelling of a Diesel Engine Common Rail Injection System Proceedings of the IFAC World Congress Prague July 3-8 2005 16
  25. Gupta , V.K. , Zhang , Z. , and Sun , Z. Modeling and Control of a Novel Pressure Regulation Mechanism for Common Rail Fuel Injection Systems Applied Mathematical Modelling 35 3473 3483 2011
  26. Chiavola , O. and Giulianelli , P. Modelling and Simulation of Common Rail Systems SAE Technical Paper 2001-01-3183 2001 10.4271/2001-01-3183
  27. Ferrari , A. and Pizzo , P. Fully Predictive Common Rail Fuel Injection Apparatus Model and its Application to Global System Dynamics Analyses International Journal of Engine Research 18 3 2017
  28. Hong , S. , Shin , H. , Sohn , J. , Park , I. , and Sunwoo , M. J. Auto. Eng 2014
  29. Catania , A.E. and Ferrari , A. Experimental Analysis, Modeling, and Control of Volumetric Radial-Piston Pumps ASME Journal of Fluids Engineering 133 0811031 08110312 2011
  30. Ferrari , A. , Paolicelli , F. , and Pizzo , P. The New Generation of Solenoid Injectors Equipped with Pressure Balanced Pilot-Valves for Energy Saving and Dynamic Response Improvement Applied Energy 151 367 376 2015
  31. Ferrari , A. and Pizzo , P. Optimization of an Algorithm for the Measurement of Unsteady Flow-Rates in High-Pressure Pipelines and Application of a Newly Designed Flowmeter to Volumetric Pump Analysis ASME Journal of Engineering for Gas Turbines and Power 138 3 031604 2016
  32. Catania , A.E. and Ferrari , A. Development and Assessment of a New Operating Principle for the Measurement of Unsteady Flow-Rates in High-Pressure Pipelines Flow Measurement and Instrumentation 20 6 230 240 2009
  33. Catania , A.E. , Ferrari , A. , and Spessa , E. Temperature Variations in the Simulation of High-Pressure Injection-System Transient Flows under Cavitation International Journal of Heat and Mass Transfer 51 2090 2107 2008
  34. Merrit , H.E. Hydraulic Control Systems John Wiley & Sons 1967
  35. Ferrari , A. , Pizzo , P. , and Rundo , M. Modelling and Experimental Studies on a Proportional Valve Using an Innovative Dynamic Flow-Rate Measurement in Fluid Power Systems Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2404 2418 2017 10.1177/0954406217721259
  36. White , F.M. Fluid Mechanics Seventh McGraw Hill 2011
  37. Zielke , W. Frequency-Dependent Friction in Transient Pipe Flow ASME Journal of Basic Eng 90 1968
  38. Kagawa , T. , Lee , I.Y. , Kitagawa , A. , and Takenaka , T. High Speed and Accurate Computing Method of Frequency-Dependent Friction in Laminar Pipe Flow for Characteristics Method Transactions of the Japanese Society of Mechanical Engineering, Series B 49 2638 2644 1983
  39. Toro , E. Riemann Solvers and Numerical Methods for Fluid Dynamics Berlin Springer-Verlag 1997
  40. Catania , A.E. , Ferrari , A. , and Spessa , E. Numerical-Experimental Study and Solutions to Reduce the Dwell Time Threshold for Fusion-Free Consecutive Injections in a Multijet Solenoid-Type C.R. System ASME Transactions, Journal of Engineering for Gas Turbines and Power 131 1 14 2009 0742-4795
  41. Catania , A.E. and Ferrari , A. Advanced Mathematical Modeling of Electronic Unit-Injector Systems for Heavy-Duty Diesel Engine Application SAE Int. J. Commer. Veh. 1 1 134 151 2009
  42. Bosch , R. Automotive Handbook Seventh Detroit Society of American Engineers (SAE) 2007

Cited By