Mechanisms for Achieving Non-Sinusoidal Waveforms on Stirling Engines

The current state-of-the-art Stirling engines use sinusoidal piston and displacer motion to drive the thermodynamic cycle and produce power. Research performed at NASA Glenn has shown that non-sinusoidal waveforms have the potential to increase Stirling engine power density, and could possibly be used to tailor engine performance to the needs of a specific application. However, the state-of-the-art Stirling engine design uses gas springs or planar springs that are very nearly linear, resulting in a system that resonates at a single frequency. This means that imposing non-sinusoidal waveforms, consisting of multiple frequencies, requires large forces from the drive mechanism (either the alternator or the crank shaft). These large forces increase losses, and increase the size and requirements of the control system. This innovation aims to reduce the external forcing requirements by introducing internal mechanical components that provide the forces necessary to achieve the desired waveforms.