Comparison of Regulated and Unregulated Emissions and Fuel Economy of SI Engines with Three Fuels: RON95, M15, and E10

This article focuses on a comparative research of the emissions discharged from four vehicles equipped with SI engines, which comply with different emission control systems (Euro 6, Euro 5, and Euro 3). The vehicles used for this work were installed with two different fuel injection technologies (direct injection and port fuel injection) and were operated with three different types of fuels (RON 95, M15, and E10). The tests were performed at the Joint Research Center (JRC) in Ispra using a state-of-the-art emissions test facility according to the European emissions legislation. The test bench included a chassis dynamometer and two different driving cycles were used: NEDC and US06. The main conclusions observed by this article are: (1) Emissions levels from vehicles fueled with M15 are similar to or lower than from those fueled with RON95. (2) Using M15 has the potential to decrease carbon dioxide emissions and to save fuel on an energetic basis. (3) PM emissions are lower for gasoline/alcoholic fuels. (4) No statistically significant effects on carbonyl emissions were found with M15.