Search
Advanced Search
of the following are true
(
)

Results

Items (216,072)
Missile Hydraulic Pumps and Their Power SourcesAIR560D (Current)
This AIR provides information about the specific requirements for missile hydraulic pumps and their associated power sources.
A-6C4 Power Sources Committee
Exterior Lighting Recommendations for Urban Air Mobility and Electric Vertical Takeoff and Landing AircraftARP7216 (Current)4/10/2026
This document covers external lighting for Electric Vertical Takeoff and Landing (E-VTOL) and Urban Air Mobility (UAM) vehicles. It discusses lights that may be installed both to meet regulatory requirements as well as for customer comfort and aircraft recognition. It also discusses the differences between UAM vehicles and other aircraft and how those differences impact the lighting.
A-20B Exterior Lighting Committee
J1939 Digital AnnexJ1939DA_202601 (Current)4/10/2026
This document is intended to supplement the J1939 documents by offering the J1939 information in a form that can be sorted and searched for easier use.
Truck and Bus Control and Communications Network Committee
Aluminum Alloy, Rolled or Forged Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651, 7075-T652), Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat TreatedAMS4310G (Current)4/9/2026
This specification covers an aluminum alloy in the form of rolled or forged rings up to 6 inches (152 mm), inclusive, in thickness (see 3.3.1.1.1) and an OD to wall thickness ratio of 10 or greater (see 8.5).
AMS D Nonferrous Alloys Committee
Steel Bars, Forgings, and Tubing, Nitriding, 1.4Cr - 1.2Mo - 0.3V (0.29 - 0.36C), (32CrMoNiV5), Double Vacuum Melted, Premium Aircraft-Quality for Bearing ApplicationsAMS6498C (Current)4/9/2026
This specification covers a nitriding grade of premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock. AMS6496 and AMS6497 cover UNS K23280 with other quality levels.
AMS E Carbon and Low Alloy Steels Committee
Magnesium Alloy, Investment Castings, 8.7Al - 0.70Zn - 0.22Mn (AZ91C-T6), Solution and Precipitation Heat TreatedAMS4452G (Current)4/9/2026
This specification covers a magnesium alloy in the form of investment castings (see 8.6).
AMS D Nonferrous Alloys Committee
INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 12 (FOR AS81703 CONNECTORS)AS33700C (Current)4/9/2026
AE-8C1 Connectors Committee
Copper Alloy (Brass), Sheet, Strip, and Plate, 70Cu - 30Zn, Half Hard (H02)AMS4507K (Current)4/8/2026
This specification covers a copper-zinc alloy (brass) in the form of sheet, strip, and plate (see 8.6).
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Sheet, 3.2Cu - 0.52Mg - 0.30Ag - 0.95 Li - 0.12Zr (2198-T8), Solution Heat Treated, Cold Worked, and Artificially AgedAMS4412C (Current)4/8/2026
This specification covers an aluminum alloy in the form of sheet from 0.063 to 0.249 inch (1.60 to 6.30 mm) in nominal thickness (see 8.6).
AMS D Nonferrous Alloys Committee
Passenger Vehicle Windshield Demisting and Defrosting SystemsJ902_202604 (Current)4/8/2026
This SAE Recommend Practice establishes for passenger cars, light trucks, and multipurpose vehicles with GVW of 4500 kg (10000 pounds) or less, as defined by the EPA, and M1 category vehicles, as defined by the European Commission:
Interior Climate Control Vehicle OEM Committee
Steel, Sheet, Strip, and Plate, 0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C) (NAX 9115-AC)AMS6354H (Current)4/8/2026
This specification covers a low-alloy steel in the form of sheet, strip, and plate 4.00 inches (101.6 mm) and under in thickness.
AMS E Carbon and Low Alloy Steels Committee
Measurement Procedures for Short Pulse Width Strobe Anticollision LightsARP5029C (Current)4/8/2026
This SAE Aerospace Recommended Practice (ARP) provides the user with standardized guidelines for the measurement of effective intensity of short pulse width strobe anticollision lights for aircraft in the laboratory, in maintenance facilities, and in the field. A common source of traceability for calibration of the measurement systems, compensation for known causes of variation in light output such as the use of colored lenses, and recommendations which minimize sources of errors and uncertainties are included in this document. Estimates of uncertainty and error sources for each class of measurement are discussed.
A-20B Exterior Lighting Committee
STUD, LOCKED-IN RING, SERRATED, HIGH STRENGTHAS51992D (Current)4/8/2026
E-25 General Standards for Aerospace and Propulsion Systems
Sampling, Conformance Strategies, and Recommended Practices for Closed Loop Processing of Powder for Additive ManufacturingARP7302 (Current)4/8/2026
This SAE Aerospace Recommended Practice (ARP) establishes methods and identifies opportunities to sample used powder feedstock circulating within closed loop equipment of an additive manufacturing (AM) process for the purpose of showing conformance to a powder specification. Powder within the entirety of closed loop equipment cannot be represented by sampling and testing of discrete, in-process lots. Because powder processing (i.e., reconditioning, conveyance, and storage) is asynchronous with a build cycle, individual samples and their associated tests do not represent the totality of powder committed to a machine. Powder consumed as part of an individual build cycle may only represent a subset of feedstock in circulation within such equipment. Therefore, regular testing to substantiate conformance to a powder specification is required to assert conforming feedstock was consumed during individual build cycles of the AM workflow to fabricate parts or preforms. Operation of some
AMS AM Additive Manufacturing Metals
Magnesium Alloy, Investment Castings, 9.0Al - 2.0Zn (AZ92A-T6), Solution and Precipitation Heat TreatedAMS4453H (Current)4/8/2026
This specification covers a magnesium alloy in the form of investment castings (see 8.6).
AMS D Nonferrous Alloys Committee
Test Method for Measuring Wet Color Transfer CharacteristicsJ1326_202604 (Current)4/8/2026
This procedure describes a method of measuring the resistance to wet color transfer of materials such as textiles, leather, and composites.
Textile and Flexible Plastics Committee
Integration and Certification Considerations for Electrified Propulsion AircraftAIR7128 (Current)4/8/2026
This document provides a comprehensive compilation of currently available practices, standards, regulations, and guidance material that have been considered relevant for developing an electrified propulsion system (independently or as part of an aircraft) and that may also help the applicants in the process of building their own certification approach with their Authority. It also covers unique considerations for electrified propulsion development and aircraft integration. It focuses on the particularities introduced by the new technology. This document is not intended to represent a proposed Means of Compliance (MoC) with any particular certification regulation.
E-40 Electrified Propulsion Committee
Aluminum Alloy, 2017, Bar, Rod, and Wire, Rolled, Drawn, or Cold FinishedAMSQQA225/5A (Current)11/6/2018
This specification covers the specific requirements for 2017 aluminum alloy bar, rod and wire produced by rolling, drawing or cold finishing.
AMS D Nonferrous Alloys Committee
Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus 0.50 ounce per linear yard (20 g/linear m)AMS3782/4B (Current)9/11/2013
This specification covers one weight and type of para-aramid webbing.
AMS P Polymeric Materials Committee
Yarn, Organic Fiber (Para-Aramid), High Modulus 1420 (1580 d tex) Denier, 1.2% FinishAMS3901/11C (Current)7/31/2014
This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.
AMS P17 Polymer Matrix Composites Committee
Plating, Brush, Nickel General PurposeAMS2451/1B (Current)1/21/2022
This specification establishes the requirements for a general-purpose brush plating of nickel applied by electrodeposition.
AMS B Finishes Processes and Fluids Committee
Test Slabs, Fluoroelastomer (FKM), 70–80 Hardness, for Improved Gas Turbine Engine Oil CompatibilityAMS3217/8A (Current)10/18/2017
This specification covers a fluorocarbon (FKM) rubber stock in the form of molded test slabs.
AMS CE Elastomers Committee
Webbing, Nylon, Integral Locking Slots 1-1/8 (29) Wide, 11,000 (48,930) Breaking StrengthAMS3797/11C (Current)4/14/2015
This specification covers one width and one strength of integral locking slot nylon webbing.
AMS P Polymeric Materials Committee
Cloth, Parachute, Meta-Aramid, Low Modulus 7.0 (237) Weight, Plain WeaveAMS3801/4C (Current)10/11/2016
This specification covers one weight and one weave of low-modulus meta-aramid cloth.
AMS P Polymeric Materials Committee
Test Slabs, Fluorosilicone (FVMQ) 55 - 65AMS3217/5C (Current)7/19/2013
This specification covers a standard fluorosilicone (FVMQ) rubber stock in the form of molded test slabs.
AMS CE Elastomers Committee
Webbing, Low Modulus Aramid 1-3/4 (44) Wide, 10,000 (44,482) Breaking Strength Herringbone TwillAMS3798/11C (Current)4/14/2015
This specification covers one width and one breaking strength of low-modulus aramid webbing.
AMS P Polymeric Materials Committee
Webbing, Low Modulus Aramid 1 (25) Wide, 2500 (11,121) Breaking Strength Herringbone TwillAMS3798/15C (Current)4/14/2015
This specification covers one width and one breaking strength of low-modulus aramid webbing.
AMS P Polymeric Materials Committee
Webbing, Low Modulus Aramid 9/16 (14) Wide, 500 (2224) Breaking Strength Herringbone Twill, Resin TreatedAMS3798/1C (Current)4/14/2015
This specification covers one width and one breaking strength of low-modulus aramid webbing.
AMS P Polymeric Materials Committee
Polytetrafluoroethylene (PTFE) Sheet, Molded General Purpose Grade, As SinteredAMS3667E (Current)8/25/2011
This specification covers virgin, unfilled polytetrafluoroethylene (PTFE) in the form of sheet, manufactured by compression molding and sintering.
AMS P Polymeric Materials Committee
Lead Alloy Sheet and Extrusions 93Pb - 6.5Sb - 0.50Sn As FabricatedAMS7721D (Current)2/7/2018
This specification covers a lead alloy in the form of sheet and extrusions.
AMS D Nonferrous Alloys Committee
Type 14 40% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or ExtrusionsAMS3678/14A (Current)2/29/2016
This specification covers a polytetrafluoroethylene (PTFE) resin filled with 40% bronze powder in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
AMS P Polymeric Materials Committee
PLASTIC ROD AND BAR, POLYIMIDE Unfilled, MoldedAMS3644/1 (Current)9/1/1994
This specification covers an unfilled polyimide plastic in the form of molded rod and bar.
AMS P Polymeric Materials Committee
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For Hand and Machine Layup GL-I-36 - 150 (302)AMS3906/5C (Current)10/13/2016
This specification covers one type of epoxy-resin-impregnated, non-woven, glass fiber in the form of tape for hand or machine layup and of flat sheet.
AMS P17 Polymer Matrix Composites Committee
Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 55 Durometer “D”AMS3571/7C (Current)9/23/2011
This specification covers one type of polyether-type urethane (EU) resin and hardener which, when mixed and cured, produce elastomeric polyurethane products.
AMS P Polymeric Materials Committee
Webbing, Nylon/Polyester, Aircraft Arresting Center Pick 130,000 Pounds (578 kN)AMS3796/3B (Current)6/9/2016
This specification covers one type of nylon/polyester in the form of webbing.
AMS P Polymeric Materials Committee
Webbing, Low Modulus Aramid 1-23/32 (44) Wide, 5500 (24,465) Breaking Strength Double Plain Weave with BinderAMS3798/4C (Current)4/14/2015
This specification covers one width and one breaking strength of low-modulus aramid webbing.
AMS P Polymeric Materials Committee
Alcohol, Denatured EthylAMS3002H (Current)3/24/2014
This specification covers a denatured ethyl alcohol in the form of a liquid.
AMS B Finishes Processes and Fluids Committee
Solvent, Petroleum AromaticAMS3165F (Current)2/9/2016
This specification covers a petroleum-base liquid solvent.
AMS B Finishes Processes and Fluids Committee
Steel, Carbon, Laminated Sheet, Surface BondedAMS6387C (Current)5/7/2018
This specification covers steel in the form of laminated sheet.
AMS E Carbon and Low Alloy Steels Committee
Thread, Para-Aramid Intermediate Modulus 10,000 yards per pound (20,159 m/kg), 16 pounds force (71 N) Breaking StrengthAMS3787/1B (Current)6/14/2016
This specification covers one weight and strength of para-aramid thread.
AMS P Polymeric Materials Committee
Webbing, Tubular, Low Modulus Aramid 3/4 (19) Wide, 2300 (10 231) Breaking StrengthAMS3799/2D (Current)7/31/2018
This specification covers one width and one breaking strength of low modulus aramid tubular webbing.
AMS P Polymeric Materials Committee
TAPE, NYLON, NONMELTING, REINFORCING 5/16 (8) Wide, 350 (1555 N) Breaking StrengthAMS3777/6 (Current)10/1/1995
This specification covers one width and strength of nylon tape.
AMS P Polymeric Materials Committee
Rope, Aramid Fiber, Jacketed Parallel Strand, Braided JacketAMS3813/3B (Current)6/20/2016
This specification covers parallel-yarn ropes formed from impregnated aramid fibers.
AMS P Polymeric Materials Committee
Aluminum Alloy 5456, Bar, Rod, Shapes, Tube, and Wire, ExtrudedAMSQQA200/7C (Current)12/7/2017
This specification covers the specific requirements for aluminum alloy 5456 bar, rod, shapes, tube, and wire produced by extrusion.
AMS D Nonferrous Alloys Committee
Interleaf Carrier Material, Composite Tape Polyethylene Coated Paper, Unperforated 0.0035 inch (0.089 mm)AMS3898/3B (Current)4/13/2022
This specification covers one type of paper coated on both sides with polyethylene film in the form of rolls of sheeting or reels of unperforated tape of the width specified.
AMS P17 Polymer Matrix Composites Committee
Roving, Organic Fiber (Para-Aramid), High Modulus 7350 Denier, (8200 d tex), 0.6% FinishAMS3901/15B (Current)7/31/2014
This specification covers one type of organic fiber in the form of roving. The product shall be formed as three ends of 2450 denier yarn (AMS3901/13) collected into an approximately parallel arrangement without twist.
AMS P17 Polymer Matrix Composites Committee
Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 5 Pounds/Cubic Foot (80 kg/m3) DensityAMS3568/1B (Current)8/25/2011
This specification covers a chemically or mechanically expanded polyether urethane (EU) elastomeric foam material in the form of ready-to-use sheet.
AMS P Polymeric Materials Committee
Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 75 Durometer “D”AMS3571/9C (Current)9/23/2011
This specification covers one type of polyether-type urethane (EU) resin and hardener which, when mixed and cured, produce elastomeric polyurethane products.
AMS P Polymeric Materials Committee
Tow, Carbon Fiber For Structural Composites 550 (3792) Tensile Strength, 38 (262) Tensile ModulusAMS3892/10B (Current)12/27/2016
This specification covers one type of carbon fiber in the form of tow.
AMS P17 Polymer Matrix Composites Committee
Identification ForgingsAMS2808E (Current)3/28/2017
This specification covers the requirements for identification of forgings, including die forgings, hand forgings, and rolled rings.
AMS B Finishes Processes and Fluids Committee
Items per page:
1 – 50 of 216072