Results
This AIR provides information about the specific requirements for missile hydraulic pumps and their associated power sources.
The intent of this specification is for the procurement of plain weave fabric epoxy prepreg product with 250 °F (121 °C) cure for aerospace applications; therefore, no qualification or equivalency threshold values are provided. Users that intend to conduct a new material qualification or equivalency program must refer to the production quality assurance section (see 4.3).
The intent of this specification is for the procurement of carbon fiber epoxy prepreg product with 250 °F (121 °C) cure for aerospace applications; therefore, no qualification or equivalency threshold values are provided. Users that intend to conduct a new material qualification or equivalency program must refer to the production quality assurance section (see 4.3).
According to SAE6906, Force Protection and Survivability (FPS) is the Human Systems Integration (HSI) domain that facilitates system operation and personnel safety during and after exposure to hostile situations or environments. Force protection refers to all preventive measures taken to mitigate hostile actions against Department of Defense (DoD) and Department of Homeland Security (DHS) (e.g., U.S. Coast Guard, Customs and Border Patrol, Immigration and Customs Enforcement, etc.) personnel. Survivability denotes the capability of the system and/or personnel manning the system to avoid or withstand man-made hostile environments without suffering an abortive impairment of his/her ability to accomplish its designated mission. Damage due to enemy or fratricidal action, or even equipment failure, will endanger the warfighters' well-being and place them into a life-threatening situation.
This method outlines the standard procedure for testing the hardness of bearing components. Bearings covered by this test method shall be any rolling element bearing used in airframe control.
This SAE Aerospace Recommended Practice (ARP) provides criteria for the design, installation, operation, and training aspects of head-up display (HUD) systems in transport category aircraft, with emphasis on pilot interface and operational requirements. The recommendations apply to permanently installed (including stowable) HUDs that display primary flight information, including those integrating enhanced flight vision system (EFVS) imagery. The intent is to ensure HUDs are designed and used in a manner that improves pilot situational awareness and flight technical performance across all phases of flight, up to and including low-visibility operations. While technical design standards (optical performance, hardware specs, etc.) are defined in documents like ARP5288 and AS8055, this document focuses on pilot usage considerations and human factors. HUD systems addressed here are typically designed to support a fail-passive operational concept applicable to Category III instrument approach
This SAE Aerospace Information Report (AIR) supplements ARP4754B/ED-79B by identifying the crucial elements to be considered when constructing the development assurance plans described in Section 3 (Development Assurance Planning) of ARP4754B/ED-79B for integrated systems. Section 4.6.4 of ARP4754B/ED-79B expands the aircraft/system integration and verification activities by emphasizing testing during integration to investigate for unintended behaviors. However, guidelines are needed for planning that are specifically aimed at the aircraft level and at integrating across system functions and boundaries. Until such guidelines are more comprehensively provided, this AIR presents a collection of lessons learned from past certification programs involving integrated systems, and as such it may be considered in conjunction with Sections 3 and 4 of ARP4754B/ED-79B. ARP4761A/ED-135 elaborates the safety activities by adding processes and methods such as the Aircraft or System Functional Hazard
The purpose of this SAE Recommended Practice is to establish uniform test procedures for measuring and rating air delivery and cooling capacity of truck and off-road self-propelled work machines used in earth moving, agriculture, and forestry air-conditioner evaporator assemblies. It is the intent to measure only the actual cooling capacity of the evaporator. It is not the intent of this document to rate and compare the performance of the total vehicle air-conditioning system.
This SAE Aerospace Information Report (AIR) provides information and guidance for the selection and use of technologies and methods for lubrication system monitoring of gas turbine aircraft engines. This AIR describes technologies and methods covering oil system performance monitoring, oil debris monitoring, and oil condition monitoring. Both on-aircraft and off-aircraft applications are presented. A higher-level view of lubrication system monitoring as part of an overall engine monitoring system (EMS) is discussed in ARP1587. The scope of this document is limited to those lubrication system monitoring, inspection, and analysis methods and devices that can be considered appropriate for health monitoring and routine maintenance. This AIR is intended to be used as a technical guide. It is not intended to be used as a legal document or standard.
This specification covers a titanium alloy in the form of wire for welding filler metal (see 8.5).
This specification covers an aluminum-lithium alloy in the form of extruded profiles 0.040 to 1.000 inch (1.00 to 25.40 mm), inclusive, in nominal thickness (see 8.5).
This specification covers an aluminum alloy in the form of castings.
This standard establishes the common requirements for training of DPRV personnel for use at all levels of the aerospace engine supply chain. This standard shall apply when an organization elects to delegate product release verification by contractual flow down to its suppliers (reference 9100 and 9110 standards) and to perform product acceptance on its behalf. It is intended that organizations specify their DPRV requirements through the application of AS9117. While the delegating organization will use the AS13001 standard as the baseline for establishing DPRV process and product training, it may include additional contractual training requirements to meet its specific needs. The DPRV training material was primarily developed for aerospace engine supply chain requirements. However, this standard may also be used in other aerospace industry sectors where a DPRV process requiring specific training can be of benefit.
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers a premium aircraft-quality, high-alloy steel gas-atomized and HIP-consolidated in the form of bars, wire, forgings, and forging stock.
This specification covers piston rings fabricated from cast iron.
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers a premium aircraft-quality alloy steel in the form of bars, forgings 100 square inches (645 cm2) and under in cross-sectional area, and forging stock of any size.
This specification covers a high-carbon steel in the form of bars.
This specification, in conjunction with the general requirements for steel heat treatment covered in AMS2759, establishes the requirements for heat treatment of low-alloy steel parts to minimum ultimate tensile strengths of 220 ksi (1517 MPa) and higher. Parts are defined in AMS2759. The requirements for heat treatment of alloy Aermet100 are no longer part of this specification and can be found in AMS2759/3. Due to the limited hardenability of these materials, size limits have been added to this specification.
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, and forging stock.
This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.
This specification covers a free-machining, low-alloy steel in the form of round bars 3.50 inches (88.9 mm) and under in nominal diameter produced by a die-drawing process.
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers a carbon steel in the form of sheet and strip.
This specification covers a premium aircraft-quality, maraging alloy steel in the form of bars, forgings, mechanical tubing, flash welded rings up through 10.000 inches (254.00 mm), inclusive, in diameter or least distance between parallel sides and stock of any size for forging or flash welded rings.
This specification covers a premium aircraft-quality alloy steel in the form of bars, forgings, and forging stock.
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.
This specification covers a nitriding grade of aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock. AMS6497 and AMS6498 cover UNS K23280 having other quality levels.
This practice provides a method for evaluating microhardness and microstructure very close (0.002 inch (0.051 mm) or less) to the surface of a disk specimen. Specific accept/reject criteria for partial decarburization (3.7.1), inadvertent carburization/nitriding (3.7.3), total decarburization/intergranular oxidation (3.8), and other characteristics evaluated are to be found in the applicable specification where this ARP is referenced.
This specification covers an alloy steel in the form of investment castings.
This specification covers carbon steel (1025) tubing of aircraft quality.
This specification covers a premium-aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, and forging stock.
This specification covers procedures for approval of premium-quality forgings, usually serialized, the stock from which such forgings are produced, and the controls to be exercised in producing the forgings and forging stock.
This specification covers an aircraft-quality, low-alloy, heat-resistant steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers materials in the form of a liquid used to remove smut from aluminum surfaces treated with etch-type oxidation and corrosion removers.
This specification covers a carbon steel in the form of sheet and strip.
This specification covers established inch/pound manufacturing tolerances applicable to carbon steel sheet, strip, and plate ordered to inch/pound dimensions. These tolerances apply to all conditions unless otherwise noted. The term “excl” is used to apply only to the higher figure of the specified range. Tolerances for product sizes not listed herein shall be as agreed upon by purchaser and vendor.
The purpose of this SAE Aerospace Recommended Practice (ARP) is to provide the aerospace industry with recommendations concerning the minimization of stress corrosion cracking in wrought heat-treatable carbon and low-alloy steels and in austenitic, precipitation hardenable, and martensitic corrosion-resistant steels and alloys. The detailed recommendations are based on laboratory and field experience and reflect those design practices and fabrication procedures which should avoid in-service stress corrosion cracking.
Items per page:
50
1 – 50 of 219468