Results

Items (219,531)

Aircraft Pressures and Temperatures – Resource Document

This SAE AIR covers Forced Air technology including: reference material, equipment, safety, operation, and methodology. It is intended to provide pressure and temperature (temps pages 26 & 31) information and minimum safety guidelines regarding use of equipment to remove frozen contaminants related to: i) Forced air ii) Forced air/fluid iii) Deicing fluid

G-12M Methods Committee

Aircraft Skin Pressures and Temperatures

AIR8469 (Current)

This information report covers all known aircraft with respect to deicing operations, especially with regard to OEM pressure and temperature limitations on the airframe. It provides data for airlines/operators on compliance with OEM limits and confirms that OEM limits are not exceeded during deicing operations.

G-12M Methods Committee

Missile Hydraulic Pumps and Their Power Sources

AIR560D (Current)

This AIR provides information about the specific requirements for missile hydraulic pumps and their associated power sources.

A-6C4 Power Sources Committee

Numerical Modeling Techniques for Jet Engine Test Cell Aerodynamics

AIR6355 (Current)

6/5/2026

This SAE Aerospace Information Report (AIR) has been written for individuals associated with ground level testing of turbofan and turbojet engines, and particularly for those who might be interested in investigating steady-state performance characteristics of a new test cell design or of proposed modifications to an existing test cell by means of numerical modeling and simulation. It is not the intent of this standard to provide specific test cell design recommendations, which are covered in the reference documentation.

EG-1E Gas Turbine Test Facilities and Equipment

Radiographic Film, 3-80

AMS7295/5C (Current)2/20/2006

This specification covers one type of low-contrast, fine-grain radiographic film in the form of cut sheets or rolls.

AMS K Non Destructive Methods and Processes Committee

Radiographic Film, 3-30

AMS7295/7C (Current)2/20/2006

This specification covers one type of low-contrast, coarse-grain radiographic film in the form of cut sheets or rolls.

AMS K Non Destructive Methods and Processes Committee

Steel Bars, Forgings, Rings and Forging Stock 0.50Cr - 0.55Ni - 0.20Mo (0.28 - 0.33C) (SAE 8630)

AMS6280N (Current)

7/6/2022

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.

AMS E Carbon and Low Alloy Steels Committee

Sheet and Strip, Steel (0.90 - 1.04C) (SAE 1095) Annealed

AMS5121M (Current)

10/1/2024

This specification covers a carbon steel in the form of sheet and strip.

AMS E Carbon and Low Alloy Steels Committee

CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NON-ENVIRONMENTAL, STRAIGHT, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)

AS85049/21D (Current)

8/4/2022

AE-8C1 Connectors Committee

CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF STRAIGHT, NONMETALLIC, CATEGORY 4C (FOR MIL-DTL-27599 SERIES I AND MIL-DTL-38999 SERIES I AND II CONNECTORS)

AS85049/45C (Current)

7/28/2021

AE-8C1 Connectors Committee

Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant Nickel Base - 15.5Cr - 16Mo - 3.8W - 5.5Fe Solution Heat Treated

AMS5750D (Current)

4/5/2017

This specification covers a corrosion and heat resistant nickel-base alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.

AMS F Corrosion and Heat Resistant Alloys Committee

Steel, Carburizing 3.5ni 1.5cr (.14 - .20c)

AMS6254E (Current)7/1/1946

No scope available.

AMS E Carbon and Low Alloy Steels Committee

STEEL BARS, FORGINGS, AND RINGS, CORROSION RESISTANT 15Cr - 20Co - 2.8Mo Solution Heat Treated

AMS5761A (Current)

10/1/1986

AMS F Corrosion and Heat Resistant Alloys Committee

Radiographic Film, 3-30

AMS7295/6C (Current)2/20/2006

This specification covers one type of low-contrast, medium-grain radiographic film in the form of cut sheets or rolls.

AMS K Non Destructive Methods and Processes Committee

CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, NONMETALLIC, CATEGORY 4C (FOR MIL-DTL-27599 SERIES I AND MIL-DTL-38999 SERIES I AND II CONNECTORS)

AS85049/46C (Current)

7/27/2021

AE-8C1 Connectors Committee

CONNECTOR ACCESSORIES, ELECTRICAL, RING, POTTING BOOT, CATEGORY 5 (MIL-DTL-38999 SERIES I AND II CONNECTORS)

AS85049/58C (Current)

4/30/2021

AE-8C1 Connectors Committee

Ethylene Tetrafluoroethylene (Etfe) Molded Sheet, Stress-Relieved

AMS3532C (Current)10/1/1993

This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of October 1995.

AMS P Polymeric Materials Committee

Molded or Extruded Bar, Rod, and Shapes Made from Polyamide-Imide (PAI) Plastic Material Both Filled and Unfilled Grades for High-Impact Strength and Mechanical Strength Applications in High Temperature Environments

AMS3670C (Current)

5/19/2021

This specification and its supplementary detail specifications cover molded or extruded bar, rod, and shapes made from filled and unfilled polyamide-imide (PAI) polymer.

AMS P Polymeric Materials Committee

Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 5 Pounds/Cubic Foot (80 kg/m3) Density

AMS3568/1B (Current)

8/25/2011

This specification covers a chemically or mechanically expanded polyether urethane (EU) elastomeric foam material in the form of ready-to-use sheet.

AMS P Polymeric Materials Committee

Film, Copper Clad Polyester

AMS3613E (Current)

11/18/2016

This specification covers a polyester resin in the form of a film clad on one or both sides with copper foil.

AMS P Polymeric Materials Committee

Elastomer: Chloroprene Rubber (CR) Weather Resistant 35 - 45

AMS3240L (Current)

6/13/2022

This specification covers a chloroprene rubber (CR) that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes such as window channels, bumper pads, chafing strips, etc. For molded rings, compression seals, molded O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, use the equivalent AMS7XXX specification.

AMS CE Elastomers Committee

Steel 0.95cr 0.2mo (0.35 0.42c)

AMS6380B (Current)6/1/1951

No scope available.

AMS E Carbon and Low Alloy Steels Committee

Steel Wire, Welding, Corrosion and Moderate Heat Resistant 15cr 7.1ni 2.4mo 1al

AMS5813C (Current)4/24/2003

This specification covers a corrosion and moderate heat resistant steel in the form of welding wire.

AMS F Corrosion and Heat Resistant Alloys Committee

Steel Sheet and Strip, Low Heat Resistant (UNS S50100)

AMS5502B (Current)10/1/1991

This document was cancelled.

AMS F Corrosion and Heat Resistant Alloys Committee

Epoxy Resin Matrix, Thermosetting Moderate Temperature Resistant, Unfilled

AMS3729A (Current)

10/4/2022

This specification covers a heat-reactive, thermosetting, epoxy resin matrix in the form of a semi-solid. The resin matrix thermally cures to an epoxy polymer.

AMS P17 Polymer Matrix Composites Committee

Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus

AMS3782B (Current)

2/9/2012

This specification and its supplementary detail specifications cover various types of para-aramid fabric in the form of webbing.

AMS P Polymeric Materials Committee

Flux, Aluminum Welding

AMS3414F (Current)

8/20/2019

This specification covers an aluminum welding flux in the form of powder.

AMS B Finishes Processes and Fluids Committee

Elastomer: Acrylonitrile Butadiene Rubber (NBR) Hot Oil and Coolant Resistant, Low Swell 45 to 55 Type ‘A’ Durometer Hardness for Products in Engine Oil Systems/Coolant Systems

AMS3226J (Current)

5/5/2020

This specification covers an Acrylonitrile Butadiene Rubber (NBR) that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. For molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, use the AMS7000 series specification.

AMS CE Elastomers Committee

Tubing, Electrical Insulation Light Wall, Extruded Polytetrafluoroethylene (PTFE)

AMS3654E (Current)

11/16/2018

This specification covers extruded polytetrafluoroethylene (PTFE) in the form of flexible tubing.

AMS P Polymeric Materials Committee

Test Slabs, Fluoroelastomer (FKM) 65 - 75

AMS3217/4C (Current)

2/23/2017

This specification covers a standard fluoroelastomer (FKM) rubber stock in the form of molded test slabs.

AMS CE Elastomers Committee

Coating Material, Fluorocarbon (FKM) Elastomeric, Anti-Static Topcoating, Color Matched

AMS3138/6C (Current)4/14/2009

This specification has been declared "CANCELLED " by the Aerospace materials Division, SAE, as of April 2009, and has been superseded by AMS3138D. The requirements of the latest issue of AMS3138D shall be fulfilled whenever reference is made to the cancelled AMS3138/1B. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications, noting that it has been superseded by AMS3138D. Cancelled specifications are available from SAE.

AMS G8 Aerospace Organic Coatings Committee

Vulcanized Fiber Sheet

AMS3564F (Current)

11/7/2011

This specification covers vulcanized fiber in the form of sheet.

AMS P Polymeric Materials Committee

Aluminum, Foil and Light Gage Sheet 99.45Al (1145-0) Annealed

AMS4011E (Current)

8/5/2022

This specification covers aluminum in the form of foil and light gage sheet.

AMS D Nonferrous Alloys Committee

Steel Tubing, Seamless 0.31 - 0.38C (SAE 1035) Stress Relieved

AMS5082J (Current)

8/30/2023

This specification covers a carbon steel in the form of seamless tubing up through 1.500 inches (38.10 mm), inclusive, outer diameter.

AMS E Carbon and Low Alloy Steels Committee

Polytetrafluoroethylene (PTFE) Extrusions Premium Strength, Sintered and Stress-Relieved

AMS3659F (Current)

8/25/2011

This specification covers virgin, unfilled polytetrafluoroethylene (PTFE) in the form of extruded rods, tubes, and profiles.

AMS P Polymeric Materials Committee

Plastic Tubing, Electrical Insulation Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio

AMS3579E (Current)

2/6/2017

This specification covers a non-crosslinked polyvinyl chloride plastic in the form of flexible, thinwall, heat-shrinkable tubing with a low recovery temperature.

AE-8D Wire and Cable Committee

Polytetrafluoroethylene (PTFE) Sheet, Molded General Purpose Grade, As Sintered

AMS3667E (Current)

8/25/2011

This specification covers virgin, unfilled polytetrafluoroethylene (PTFE) in the form of sheet, manufactured by compression molding and sintering.

AMS P Polymeric Materials Committee

Plastic Moldings, Melamine-Formaldehyde, Mineral Filled

AMS3640F (Current)10/1/1996

This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of October 1996.

AMS P Polymeric Materials Committee

Aluminum Alloy, Plate, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T651), Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated

AMS4090H (Current)

12/15/2025

This specification covers an aluminum alloy in the form of plate from 0.250 to 1.500 inches (6.35 to 38.10 mm), inclusive, in thickness (see 8.6).

AMS D Nonferrous Alloys Committee

Aluminum Alloy Sheet and Plate, Alclad One Side 4.4Cu - 1.5Mg - 0.60Mn Alclad One Side 2024 and 1-1/2% Alclad One Side 2024-T3 Sheet; 1-1/2% Alclad One Side 2024-T351 Plate

AMS4036L (Current)

5/25/2017

This specification covers an aluminum alloy in the form of sheet and plate clad on one side with a different aluminum alloy.

AMS D Nonferrous Alloys Committee

Potting Compound, Epoxy Bisphenol A-Type

AMS3731C (Current)9/22/2016

This specification and its supplementary detail specifications cover epoxy resin formulations based on diglycidyl ether of bisphenol A with an epoxide equivalent of 175-195. When properly mixed and cured, these resisns produce a rigid or flexible product.

AMS P Polymeric Materials Committee

Webbing, Woven Nylon Fabric

AMS3795B (Current)

6/9/2016

This specification and its supplementary detail specifications cover three types of nylon in the form of webbing.

AMS P Polymeric Materials Committee

Sheet and Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-O) Annealed and Recrystallized

AMS4375N (Current)

5/1/2024

This specification covers a magnesium alloy in the form of sheet and plate from 0.016 to 3.000 inches (0.41 to 76.20 mm), inclusive, in thickness (see 8.5).

AMS D Nonferrous Alloys Committee