Search
Advanced Search
of the following are true
(
)

Results

Items (214,212)
Dedicated Short Range Communications (DSRC) Performance Requirements for V2V Safety AwarenessJ2945/2_202511 (Current)11/10/2025
This SAE Document specifies DSRC interface requirements for V2V Safety Awareness applications, including detailed Systems Engineering documentation (needs and requirements mapped to appropriate message exchanges). These applications include: Emergency Vehicle Alert, Roadside Alert, and Safety Awareness Alerts for Objects and Adverse Road Conditions. This document extends the V2V Communications capabilities defined in J2945/1 to support these applications, and the National ITS Architecture. The purpose of this SAE Document is to enable interoperability for V2V Safety Awareness communications.
V2X Core Technical Committee
Silicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 65 - 75AMS3337G (Current)11/10/2025
This specification covers a silicone (PVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.
AMS CE Elastomers Committee
Rubber, Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -22 °F (-30 °C) For Elastomeric Shapes or Parts in Gas Turbine Engine Oil, Fuel and Hydraulic SystemsAMS3384A (Current)11/10/2025
This specification covers a high temperature, compression set and fluid resistant fluorocarbon (FKM) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes for aeronautical and aerospace applications.
AMS CE Elastomers Committee
Time‐Sensitive Networking for Aerospace Onboard Ethernet CommunicationsIEEE/SAEAS6675 (Current)11/07/2025
This standard specifies profiles of IEEE 802.1 Time-Sensitive Networking (TSN) and IEEE 802.1 Security standards for aerospace onboard bridged IEEE 802.3 Ethernet networks. The profiles select features, options, configurations, defaults, protocols, and procedures of bridges, end stations, and Local Area Networks to build deterministic networks for aerospace onboard communications.
AS-1A Avionic Networks Committee
High-Tension Ignition CableJ2031_202511 (Current)11/06/2025
The specifications contained in this SAE Standard pertain to high-tension ignition cable used in road vehicle engine ignition systems.
Ignition Standards Committee
Aluminum Alloy Sheet and Plate, Alclad One Side 4.4Cu - 1.5Mg - 0.60Mn Alclad One Side 2024 and 1-1/2% Alclad One Side 2024-T3 Sheet; 1-1/2% Alclad One Side 2024-T351 PlateAMS4036L (Current)05/25/2017
This specification covers an aluminum alloy in the form of sheet and plate clad on one side with a different aluminum alloy.
AMS D Nonferrous Alloys Committee
Iron-Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 41Fe - 37.5Ni - 14Co - 4.8Cb (Nb) - 1.5Ti Vacuum Melted, Low ExpansionAMS5802E (Current)06/05/2017
This specification covers a corrosion and heat-resistant iron-nickel alloy in the form of welding wire.
AMS F Corrosion and Heat Resistant Alloys Committee
Cleaner, Turbine Engine Gas Path Solvent Emulsion TypeAMS1548B (Current)06/01/2017
This specification covers a solvent-emulsion cleaner in the form of a solvent-base liquid concentrate
AMS J Aircraft Maintenance Chemicals and Materials Committee
Alloy Castings, Sand, Corrosion and Heat Resistant 55Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V Solution Heat TreatedAMS5389D (Current)04/18/2017
This specification covers a corrosion and heat resistant nickel alloy in the form of sand castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Alloy Castings, Sand, Corrosion and Heat Resistant 16Co - 29Cr - 4.5W As CastAMS5373E (Current)04/06/2017
This specification covers a corrosion and heat resistant cobalt alloy in the form of sand castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Iron-Nickel-Cobalt Alloy, Sheet, Strip, and Plate 53Fe - 29Ni - 17Co Low Expansion Glass Sealing, AnnealedAMS7728J (Current)04/07/2017
This specification covers an iron-nickel-cobalt alloy in the form of sheet, strip, and plate.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution Heat Treated, Precipitation HardenableAMS5357E (Current)11/05/2019
This specification covers a corrosion-resistant steel in the form of investment castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Titanium Alloy, Forgings 6AI - 4V Alpha-Beta or Beta Processed, AnnealedAMS4920G (Current)12/13/2019
This specification covers a titanium alloy in the form of forgings, 6.000 inches (152.40 mm) and under in cross-sectional thickness and forging stock of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy, Welding Wire 6AI - 2Sn - 4Zr - 2MoAMS4952G (Current)03/18/2020
This specification covers a titanium alloy in the form of welding wire.
AMS G Titanium and Refractory Metals Committee
Butyl (IIR) Rubber Phosphate Ester Resident 85 - 95AMS3239G (Current)01/03/2020
This specification covers a butyl (IIR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.
AMS CE Elastomers Committee
Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging StockAMS2371L (Current)12/17/2019
This specification covers quality assurance sampling and testing procedures used to determine conformance to applicable material specification requirements of wrought corrosion and heat-resistant steel and alloy products and of forging stock.
AMS F Corrosion and Heat Resistant Alloys Committee
Acrylonitrile Butadiene (NBR) Rubber Hot Oil Resistant, Low Swell 75 - 85AMS3229K (Current)01/03/2020
This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.
AMS CE Elastomers Committee
Acrylonitrile Butadiene (NBR) Rubber Hot Oil and Coolant Resistant, Low Swell 55 - 65AMS3227J (Current)01/03/2020
This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.
AMS CE Elastomers Committee
Aluminum Alloy Plate 2.7Cu - 2.2Li - 0.12Zr (2090-T81) Solution Heat Treated, Cold Worked, and AgedAMS4303C (Current)04/24/2017
This specification covers an aluminum alloy in the form of plate.
AMS D Nonferrous Alloys Committee
Disilicide Diffusion Coating of Molybdenum and Molybdenum Alloys Pack Cementation MethodAMS2465D (Current)04/20/2017
This specification covers the procedure for applying a disilicide diffusion coating to molybdenum and molybdenum alloy parts by the pack cementation method and the properties of the coating so deposited.
AMS B Finishes Processes and Fluids Committee
Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat TreatedAMS5589G (Current)12/13/2019
This specification covers a corrosion and heat-resistant nickel alloy in the form of seamless tubing 0.125 inch (3.18 mm) and over in nominal OD with nominal wall thickness 0.015 inch (0.38 mm) and over (see 8.6).
AMS F Corrosion and Heat Resistant Alloys Committee
Aluminum Alloy Die Forgings (7175-T66) Solution and Precipitation Heat TreatedAMS4148F (Current)05/25/2017
This specification covers an aluminum alloy in the form of die forgings and forging stock.
AMS D Nonferrous Alloys Committee
Steel, Bars and Forgings, Corrosion Resistant 17Cr - 7Ni - 1AlAMS5644E (Current)04/04/2017
AMS F Corrosion and Heat Resistant Alloys Committee
Aluminum Alloy Castings, Sand, Moderate Heat Resistance 4.0Cu - 2.0Ni - 1.5Mg - 0.12Ti (242.0P) Solution Heat Treated and StabilizedAMS4222H (Current)04/05/2017
This specification covers an aluminum alloy in the form of sand castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511 or T6510) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat TreatedAMS4173G (Current)10/17/2019
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.
AMS D Nonferrous Alloys Committee
Elastomer: Phenyl Methyl Vinyl Silicone (PVMQ) Low Temperature/Engine Oil Resistant High Strength/High Tear 55 to 65 Type “A” Hardness For Products in Aircraft Piston Engine Oil/Low Temperature EnvironmentsAMS3346H (Current)10/24/2019
This specification covers a phenyl vinyl silicone rubber material that can be used to manufacture product in the form of sheet, strip, tubing, molded shapes, and extrusions. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material.
AMS CE Elastomers Committee
Elastomer: Silicone Rubber (MQ/VMQ) Flame Retardant, Low Smoke Density, Low Smoke Toxicity, High Strength, 65 - 75 Durometer Type A Hardness For Products in Pressurized Aircraft Compartment InteriorsAMS3310A (Current)08/30/2019
This specification covers a silicone (MQ/VMQ) elastomer that can be used to manufacture product in the form of molded sheet, strips, and shapes, color coded white in accordance with ARP1527.
AMS CE Elastomers Committee
Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold FinishedAMS5624F (Current)04/04/2017
This specification covers an alloy steel in the form of bars 1 inch (25.4 mm) and under in nominal diameter or distance between parallel sides.
AMS F Corrosion and Heat Resistant Alloys Committee
Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 65 - 75AMS3215N (Current)11/05/2019
This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.
AMS CE Elastomers Committee
Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction MeltedAMS5751F (Current)04/06/2017
This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel Castings, Investment, Corrosion Resistant 19.5Cr - 10.5Ni - 0.25S (Type 303) Solution Heat TreatedAMS5341D (Current)04/06/2017
This specification covers a corrosion-resistant steel in the form of investment castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Aluminum Beryllium, NNS Preforms Hot Isostatic Pressed 38Al - 62BeAMS7909D (Current)10/29/2019
This specification covers aluminum-beryllium powders consolidated by hot isostatic pressing (HIP) into the form of blocks, blanks or shapes.
AMS G Titanium and Refractory Metals Committee
Iron-Nickel-Cobalt Alloy, Wire 53Fe - 2.9Ni - 17Co Low Expansion, Glass Sealing, AnnealedAMS7726H (Current)04/06/2017
This specification covers a low-expansion iron-nickel-cobalt alloy in the form of wire.
AMS F Corrosion and Heat Resistant Alloys Committee
Castings, Aluminum Alloy Sand 5.0Si - 1.2Cu - 0.50Mg (355.0-T71) Solution Heat Treated and OveragedAMS4214K (Current)07/12/2019
This specification covers an aluminum alloy in the form of sand castings.
AMS D Nonferrous Alloys Committee
Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber Single Wire Braid Reinforced, Chloroprene Covered, NoncollapsingAMS3388E (Current)04/30/2019
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose.
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Aluminum Alloy Plate (7081-T7451) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and OveragedAMS4410A (Current)05/07/2019
This specification covers an aluminum alloy in the form of plate.
AMS D Nonferrous Alloys Committee
Steel Castings, Sand and Centrifugal, Corrosion and Heat Resistant 18.5Cr - 10.5Ni - 0.90 (Cb+Ta) Solution Heat TreatedAMS5363F (Current)04/04/2017
This specification covers a corrosion and heat resistant steel in the form of sand or centrifugal castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Welding Wire 1.75Mn - 0.78Cr - 2.8Ni - 0.85Mo - (0.09 - 0.12C) Vacuum Melted, Environment-Controlled PackagingAMS6469E (Current)10/26/2016
This specification covers a low-alloy steel in the form of welding wire.
AMS E Carbon and Low Alloy Steels Committee
Rubber Synthetic Low-Temperature Resistant 25 - 35AMS3204N (Current)05/10/2019
This specification covers a synthetic rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.
AMS CE Elastomers Committee
Steel, Sheet and Strip 0.08 - 0.13C, Aluminum Killed (SAE 1010) Deep Forming GradeAMS5047G (Current)02/15/2017
This specification covers an aluminum-killed carbon steel in the form of sheet and strip.
AMS E Carbon and Low Alloy Steels Committee
Flux, Aluminum WeldingAMS3414F (Current)08/20/2019
This specification covers an aluminum welding flux in the form of powder.
AMS B Finishes Processes and Fluids Committee
Electrodeposition of Zinc-Nickel AlloysAMS03_040A (Current)03/21/2017
This SAE Standard specifies the guidance and the requirements for the electrodeposition of zinc-nickel alloy coatings on a range of metallic substrates for the provision of corrosion resistance to steel components and galvanic compatibility between some bi-metallic contacting surfaces.
AMS B Finishes Processes and Fluids Committee
Plating, Brush General RequirementsAMS2451D (Current)05/23/2019
This specification and its supplementary slash specifications establish the requirements for electrodeposition of metals by brush plating.
AMS B Finishes Processes and Fluids Committee
Titanium Alloy Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Solution Heat Treated and Aged 173 ksi (1193 MPa) Tensile StrengthAMS4984G (Current)05/28/2019
This specification covers a titanium alloy in the form of forgings 3.000 inches (76.20 mm) and under in nominal cross-sectional thickness and of stock for forging of any size.
AMS G Titanium and Refractory Metals Committee
Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber, Textile Reinforced, Chloroprene Covered, CollapsingAMS3386E (Current)04/30/2019
This specification covers a synthetic rubber in the form of a soft wall, smooth bore, collapsing-type hose.
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber Double Wire Braid Reinforced, Chloroprene Covered, NoncollapsingAMS3389E (Current)04/30/2019
This specification covers a synthetic rubber in the form of a nonrigid, smooth bore, noncollapsing-type hose.
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Chemical Treatment for Aluminum Alloys Low Electrical Resistance CoatingAMS2474E (Current)06/25/2019
This specification establishes the engineering requirements for producing chemical-film coatings on aluminum and aluminum alloys and the properties of such coatings.
AMS B Finishes Processes and Fluids Committee
Alloy Castings, Investment, Corrosion and Heat Resistant 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution and Precipitation Heat TreatedAMS5384F (Current)04/04/2017
This specification covers a corrosion and heat resistant nickel alloy in the form of investment castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Iron Alloy, Corrosion and Heat Resistant, Covered, Welding Electrodes 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0 (Cb + Ta)AMS5795G (Current)04/04/2017
This specification covers a corrosion and heat resistant iron alloy in the form of covered welding electrodes.
AMS F Corrosion and Heat Resistant Alloys Committee
LOW-TEMPERATURE CRANKING LOAD REQUIREMENTS OF AN ENGINEJ1253_199306 (Current)06/01/1993
The electrical cranking system components, which include the battery, cables, and cranking motor, must be carefully selected to provide the necessary speed to start an engine under the most severe climatic conditions for which the system is intended. Engine cranking loads increase with cold temperatures, therefore, the initial selection of these components needs to consider low-temperature engine torque requirements. To insure an adequate electrical cranking system is obtained, it is important that proper test procedures are used for obtaining the cranking load requirements of the engine.
Electrical Systems
Items per page:
1 – 50 of 214212