Search
Advanced Search
of the following are true
(
)

Results

Items (214,212)
Dedicated Short Range Communications (DSRC) Performance Requirements for V2V Safety AwarenessJ2945/2_202511 (Current)11/10/2025
This SAE Document specifies DSRC interface requirements for V2V Safety Awareness applications, including detailed Systems Engineering documentation (needs and requirements mapped to appropriate message exchanges). These applications include: Emergency Vehicle Alert, Roadside Alert, and Safety Awareness Alerts for Objects and Adverse Road Conditions. This document extends the V2V Communications capabilities defined in J2945/1 to support these applications, and the National ITS Architecture. The purpose of this SAE Document is to enable interoperability for V2V Safety Awareness communications.
V2X Core Technical Committee
Rubber, Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -22 °F (-30 °C) For Elastomeric Shapes or Parts in Gas Turbine Engine Oil, Fuel and Hydraulic SystemsAMS3384A (Current)11/10/2025
This specification covers a high temperature, compression set and fluid resistant fluorocarbon (FKM) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes for aeronautical and aerospace applications.
AMS CE Elastomers Committee
Silicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 65 - 75AMS3337G (Current)11/10/2025
This specification covers a silicone (PVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.
AMS CE Elastomers Committee
Time‐Sensitive Networking for Aerospace Onboard Ethernet CommunicationsIEEE/SAEAS6675 (Current)11/07/2025
This standard specifies profiles of IEEE 802.1 Time-Sensitive Networking (TSN) and IEEE 802.1 Security standards for aerospace onboard bridged IEEE 802.3 Ethernet networks. The profiles select features, options, configurations, defaults, protocols, and procedures of bridges, end stations, and Local Area Networks to build deterministic networks for aerospace onboard communications.
AS-1A Avionic Networks Committee
Steel Bars, Forgings, Mechanical Tubing and Forging Stock, 0.92Cr - 0.75Ni - 0.52Mo - 0.003B - 0.04V (98BV40), Aircraft QualityAMS6423K (Current)10/23/2025
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
AMS E Carbon and Low Alloy Steels Committee
Coupling Assembly, V-Band Sheet Metal Wide Flange, Pneumatic TubeAS4751A (Current)10/21/2025
This SAE Aerospace Standard (AS) establishes the requirements for a grooved clamp coupling and flanges suitable for joining intermediate pressure and temperature ducting in aircraft pneumatic systems. The rigid coupling joint assembly, hereafter referred to as “the joint”, shall operate within the temperature range of -65 °F external ambient to +800 °F internal fluid.
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
COUPLING, SHEET METAL, 40° V-BAND, WIDE, STANDARD LATCHAS4751/1A (Current)10/21/2025
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Requirements for Probe Data Collection ApplicationsJ2945/C_202206 (Current)06/09/2022
Connected vehicles can provide data from multiple sensors that monitor both the vehicle and the environment through which the vehicle is passing. The data, when shared, can be used to enhance and optimize transportation operations and management—specifically, traffic flow and infrastructure maintenance. This document describes an interface between vehicle and infrastructure for collecting vehicle/probe data. That data may represent a single point in time or may be accumulated over defined periods of time or distance, or may be triggered based on circumstance. The purpose of this document is to define an interoperable means of collecting the vehicle/probe data in support of the use cases defined herein. There are many additional use cases that may be realized based on the interface defined in this document. Note that vehicle diagnostics are not included within the scope of this document, but diagnostics-related features may be added to probe data in a future supplemental document.
V2X Core Technical Committee
CLAMP, LOOP, CUSHIONED, HINGED, QUICK RELEASE - CABLE OR WIREAS4882B (Current)10/21/2025
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
FITTING END, INTEGRAL CENTERED WELD LIP, DESIGN STANDARDAS4697C (Current)10/21/2025
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
BEARING, PLAIN, SELF-ALIGNING, PTFE LINED, NARROWAS21233B (Current)10/23/2025
ACBG Plain Bearing Committee
In-Service Fiber Optic Inspection, Evaluation, and Cleaning, Best Practices, Expanded Beam TerminiARP6283/1 (Current)10/23/2025
This document provides user information on best practice methods and processes for the in-service inspection, evaluation, and cleaning of expanded beam (EB) fiber optic interconnect components (termini, alignment sleeves, and connectors), test equipment, and test leads based on the information provided in AIR6031 and ARP6283. This document provides the user with a decision-making tool to determine if the fiber optic components are acceptable for operation with EB fiber optic termini.
AS-3 Fiber Optics and Applied Photonics Committee
Cooperative Perception Concept of OperationsJ3295_202510 (Current)10/23/2025
This information report is a cooperative perception (CP) services concept of operations. Included is a description of CP systems and a description of the data potentially shared between its participants. The participants are the actors within the CP system, such as vehicles, bicycles, pedestrians and infrastructure. The types of data that can be shared among the actors are presented, and the types of features and applications that can be satisfied based on the types and accuracy of information shared are classified into categories. This report supports a wide variety of potential CP use cases ranging from connected-vehicle enabled driver-assistance applications (e.g., for collision avoidance) to connected automation.
Connected Transportation Interoperability Committee
Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 47.5Ni - 22Cr - 1.5Co - 9Mo - 0.60W - 18.5Fe (Hastelloy® X) As-CastAMS5390H (Current)07/16/2025
This specification covers a corrosion- and heat-resistant nickel alloy in the form of investment castings.
AMS F Corrosion and Heat Resistant Alloys Committee
CONNECTORS, PLUG, ELECTRIC, 90° ASSEMBLY, CRIMP CONTACT, AN TYPEAS34081B (Current)10/23/2025
AE-8C1 Connectors Committee
A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Introduction to Aerospace Fiber Optics Knowledge CompetenciesARP5602/1 (Current)10/23/2025
This document establishes training guidelines applicable to fiber optic safety training, technical training and fiber awareness for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Logisticians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Shipping Receiving Production Purchasing
AS-3 Fiber Optics and Applied Photonics Committee
Gaseous NitrocarburizingAMS2757C (Current)03/15/2019
This specification covers the engineering requirements for producing a continuous thin epsilon-iron-carbonitride compound layer on parts by means of a gaseous, low temperature process, and properties of the case.
AMS B Finishes Processes and Fluids Committee
A Guideline for Aerospace Platform Fiber Optic Training and Awareness EducationARP5602 (Current)10/23/2025
This document establishes training guidelines applicable to fiber optic safety training, technical training and fiber awareness for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Logisticians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Shipping Receiving Production Purchasing
AS-3 Fiber Optics and Applied Photonics Committee
Logistics Product DataGEIASTD0007C (Current)11/06/2019
SAE GEIA-STD-0007C defines logistics product data generated during the requirement definition and design of an industry or government system, end item, or product. It makes use of the Extensible Markup Language (XML) through the use of entities and attributes that comprise logistics product data and their definitions. The standard is designed to provide users with a uniform set of data tags for all or portions of logistics product data. The standard can be applied to any industry or government product, system or equipment acquisition program, major modification program, and applicable research and development projects. This standard is for use by both industry and government activities. As used in this standard, the requiring authority is generally the customer and the customer can be a government or industry activity. The performing activity may be either a industry or government activity. The use of the term “contract” in this standard includes any document of agreement between
LCLS Life Cycle Logistics Supportability
Titanium Alloy, Welding Wire 6AI - 2Sn - 4Zr - 2MoAMS4952G (Current)03/18/2020
This specification covers a titanium alloy in the form of welding wire.
AMS G Titanium and Refractory Metals Committee
Butyl (IIR) Rubber Phosphate Ester Resident 85 - 95AMS3239G (Current)01/03/2020
This specification covers a butyl (IIR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.
AMS CE Elastomers Committee
Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging StockAMS2371L (Current)12/17/2019
This specification covers quality assurance sampling and testing procedures used to determine conformance to applicable material specification requirements of wrought corrosion and heat-resistant steel and alloy products and of forging stock.
AMS F Corrosion and Heat Resistant Alloys Committee
Acrylonitrile Butadiene (NBR) Rubber Hot Oil Resistant, Low Swell 75 - 85AMS3229K (Current)01/03/2020
This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.
AMS CE Elastomers Committee
Acrylonitrile Butadiene (NBR) Rubber Hot Oil and Coolant Resistant, Low Swell 55 - 65AMS3227J (Current)01/03/2020
This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.
AMS CE Elastomers Committee
Aluminum Alloy Plate 2.7Cu - 2.2Li - 0.12Zr (2090-T81) Solution Heat Treated, Cold Worked, and AgedAMS4303C (Current)04/24/2017
This specification covers an aluminum alloy in the form of plate.
AMS D Nonferrous Alloys Committee
Disilicide Diffusion Coating of Molybdenum and Molybdenum Alloys Pack Cementation MethodAMS2465D (Current)04/20/2017
This specification covers the procedure for applying a disilicide diffusion coating to molybdenum and molybdenum alloy parts by the pack cementation method and the properties of the coating so deposited.
AMS B Finishes Processes and Fluids Committee
Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat TreatedAMS5589G (Current)12/13/2019
This specification covers a corrosion and heat-resistant nickel alloy in the form of seamless tubing 0.125 inch (3.18 mm) and over in nominal OD with nominal wall thickness 0.015 inch (0.38 mm) and over (see 8.6).
AMS F Corrosion and Heat Resistant Alloys Committee
Aluminum Alloy Die Forgings (7175-T66) Solution and Precipitation Heat TreatedAMS4148F (Current)05/25/2017
This specification covers an aluminum alloy in the form of die forgings and forging stock.
AMS D Nonferrous Alloys Committee
Steel, Bars and Forgings, Corrosion Resistant 17Cr - 7Ni - 1AlAMS5644E (Current)04/04/2017
AMS F Corrosion and Heat Resistant Alloys Committee
Aluminum Alloy Castings, Sand, Moderate Heat Resistance 4.0Cu - 2.0Ni - 1.5Mg - 0.12Ti (242.0P) Solution Heat Treated and StabilizedAMS4222H (Current)04/05/2017
This specification covers an aluminum alloy in the form of sand castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511 or T6510) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat TreatedAMS4173G (Current)10/17/2019
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.
AMS D Nonferrous Alloys Committee
Elastomer: Phenyl Methyl Vinyl Silicone (PVMQ) Low Temperature/Engine Oil Resistant High Strength/High Tear 55 to 65 Type “A” Hardness For Products in Aircraft Piston Engine Oil/Low Temperature EnvironmentsAMS3346H (Current)10/24/2019
This specification covers a phenyl vinyl silicone rubber material that can be used to manufacture product in the form of sheet, strip, tubing, molded shapes, and extrusions. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material.
AMS CE Elastomers Committee
Elastomer: Silicone Rubber (MQ/VMQ) Flame Retardant, Low Smoke Density, Low Smoke Toxicity, High Strength, 65 - 75 Durometer Type A Hardness For Products in Pressurized Aircraft Compartment InteriorsAMS3310A (Current)08/30/2019
This specification covers a silicone (MQ/VMQ) elastomer that can be used to manufacture product in the form of molded sheet, strips, and shapes, color coded white in accordance with ARP1527.
AMS CE Elastomers Committee
Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold FinishedAMS5624F (Current)04/04/2017
This specification covers an alloy steel in the form of bars 1 inch (25.4 mm) and under in nominal diameter or distance between parallel sides.
AMS F Corrosion and Heat Resistant Alloys Committee
Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 65 - 75AMS3215N (Current)11/05/2019
This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.
AMS CE Elastomers Committee
Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction MeltedAMS5751F (Current)04/06/2017
This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel Castings, Investment, Corrosion Resistant 19.5Cr - 10.5Ni - 0.25S (Type 303) Solution Heat TreatedAMS5341D (Current)04/06/2017
This specification covers a corrosion-resistant steel in the form of investment castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Aluminum Beryllium, NNS Preforms Hot Isostatic Pressed 38Al - 62BeAMS7909D (Current)10/29/2019
This specification covers aluminum-beryllium powders consolidated by hot isostatic pressing (HIP) into the form of blocks, blanks or shapes.
AMS G Titanium and Refractory Metals Committee
Iron-Nickel-Cobalt Alloy, Wire 53Fe - 2.9Ni - 17Co Low Expansion, Glass Sealing, AnnealedAMS7726H (Current)04/06/2017
This specification covers a low-expansion iron-nickel-cobalt alloy in the form of wire.
AMS F Corrosion and Heat Resistant Alloys Committee
Castings, Aluminum Alloy Sand 5.0Si - 1.2Cu - 0.50Mg (355.0-T71) Solution Heat Treated and OveragedAMS4214K (Current)07/12/2019
This specification covers an aluminum alloy in the form of sand castings.
AMS D Nonferrous Alloys Committee
Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber Single Wire Braid Reinforced, Chloroprene Covered, NoncollapsingAMS3388E (Current)04/30/2019
This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose.
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Aluminum Alloy Plate (7081-T7451) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and OveragedAMS4410A (Current)05/07/2019
This specification covers an aluminum alloy in the form of plate.
AMS D Nonferrous Alloys Committee
Steel Castings, Sand and Centrifugal, Corrosion and Heat Resistant 18.5Cr - 10.5Ni - 0.90 (Cb+Ta) Solution Heat TreatedAMS5363F (Current)04/04/2017
This specification covers a corrosion and heat resistant steel in the form of sand or centrifugal castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Welding Wire 1.75Mn - 0.78Cr - 2.8Ni - 0.85Mo - (0.09 - 0.12C) Vacuum Melted, Environment-Controlled PackagingAMS6469E (Current)10/26/2016
This specification covers a low-alloy steel in the form of welding wire.
AMS E Carbon and Low Alloy Steels Committee
Rubber Synthetic Low-Temperature Resistant 25 - 35AMS3204N (Current)05/10/2019
This specification covers a synthetic rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.
AMS CE Elastomers Committee
Steel, Sheet and Strip 0.08 - 0.13C, Aluminum Killed (SAE 1010) Deep Forming GradeAMS5047G (Current)02/15/2017
This specification covers an aluminum-killed carbon steel in the form of sheet and strip.
AMS E Carbon and Low Alloy Steels Committee
Flux, Aluminum WeldingAMS3414F (Current)08/20/2019
This specification covers an aluminum welding flux in the form of powder.
AMS B Finishes Processes and Fluids Committee
Electrodeposition of Zinc-Nickel AlloysAMS03_040A (Current)03/21/2017
This SAE Standard specifies the guidance and the requirements for the electrodeposition of zinc-nickel alloy coatings on a range of metallic substrates for the provision of corrosion resistance to steel components and galvanic compatibility between some bi-metallic contacting surfaces.
AMS B Finishes Processes and Fluids Committee
Plating, Brush General RequirementsAMS2451D (Current)05/23/2019
This specification and its supplementary slash specifications establish the requirements for electrodeposition of metals by brush plating.
AMS B Finishes Processes and Fluids Committee
Titanium Alloy Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Solution Heat Treated and Aged 173 ksi (1193 MPa) Tensile StrengthAMS4984G (Current)05/28/2019
This specification covers a titanium alloy in the form of forgings 3.000 inches (76.20 mm) and under in nominal cross-sectional thickness and of stock for forging of any size.
AMS G Titanium and Refractory Metals Committee
Items per page:
1 – 50 of 214212