Results
This AIR provides information about the specific requirements for missile hydraulic pumps and their associated power sources.
The intent of this specification is for the procurement of plain weave fabric epoxy prepreg product with 250 °F (121 °C) cure for aerospace applications; therefore, no qualification or equivalency threshold values are provided. Users that intend to conduct a new material qualification or equivalency program must refer to the production quality assurance section (see 4.3).
The intent of this specification is for the procurement of carbon fiber epoxy prepreg product with 250 °F (121 °C) cure for aerospace applications; therefore, no qualification or equivalency threshold values are provided. Users that intend to conduct a new material qualification or equivalency program must refer to the production quality assurance section (see 4.3).
According to SAE6906, Force Protection and Survivability (FPS) is the Human Systems Integration (HSI) domain that facilitates system operation and personnel safety during and after exposure to hostile situations or environments. Force protection refers to all preventive measures taken to mitigate hostile actions against Department of Defense (DoD) and Department of Homeland Security (DHS) (e.g., U.S. Coast Guard, Customs and Border Patrol, Immigration and Customs Enforcement, etc.) personnel. Survivability denotes the capability of the system and/or personnel manning the system to avoid or withstand man-made hostile environments without suffering an abortive impairment of his/her ability to accomplish its designated mission. Damage due to enemy or fratricidal action, or even equipment failure, will endanger the warfighters' well-being and place them into a life-threatening situation.
This method outlines the standard procedure for testing the hardness of bearing components. Bearings covered by this test method shall be any rolling element bearing used in airframe control.
This SAE Aerospace Recommended Practice (ARP) provides criteria for the design, installation, operation, and training aspects of head-up display (HUD) systems in transport category aircraft, with emphasis on pilot interface and operational requirements. The recommendations apply to permanently installed (including stowable) HUDs that display primary flight information, including those integrating enhanced flight vision system (EFVS) imagery. The intent is to ensure HUDs are designed and used in a manner that improves pilot situational awareness and flight technical performance across all phases of flight, up to and including low-visibility operations. While technical design standards (optical performance, hardware specs, etc.) are defined in documents like ARP5288 and AS8055, this document focuses on pilot usage considerations and human factors. HUD systems addressed here are typically designed to support a fail-passive operational concept applicable to Category III instrument approach
This SAE Aerospace Information Report (AIR) supplements ARP4754B/ED-79B by identifying the crucial elements to be considered when constructing the development assurance plans described in Section 3 (Development Assurance Planning) of ARP4754B/ED-79B for integrated systems. Section 4.6.4 of ARP4754B/ED-79B expands the aircraft/system integration and verification activities by emphasizing testing during integration to investigate for unintended behaviors. However, guidelines are needed for planning that are specifically aimed at the aircraft level and at integrating across system functions and boundaries. Until such guidelines are more comprehensively provided, this AIR presents a collection of lessons learned from past certification programs involving integrated systems, and as such it may be considered in conjunction with Sections 3 and 4 of ARP4754B/ED-79B. ARP4761A/ED-135 elaborates the safety activities by adding processes and methods such as the Aircraft or System Functional Hazard
The purpose of this SAE Recommended Practice is to establish uniform test procedures for measuring and rating air delivery and cooling capacity of truck and off-road self-propelled work machines used in earth moving, agriculture, and forestry air-conditioner evaporator assemblies. It is the intent to measure only the actual cooling capacity of the evaporator. It is not the intent of this document to rate and compare the performance of the total vehicle air-conditioning system.
This SAE Aerospace Information Report (AIR) provides information and guidance for the selection and use of technologies and methods for lubrication system monitoring of gas turbine aircraft engines. This AIR describes technologies and methods covering oil system performance monitoring, oil debris monitoring, and oil condition monitoring. Both on-aircraft and off-aircraft applications are presented. A higher-level view of lubrication system monitoring as part of an overall engine monitoring system (EMS) is discussed in ARP1587. The scope of this document is limited to those lubrication system monitoring, inspection, and analysis methods and devices that can be considered appropriate for health monitoring and routine maintenance. This AIR is intended to be used as a technical guide. It is not intended to be used as a legal document or standard.
This specification covers a titanium alloy in the form of wire for welding filler metal (see 8.5).
This specification covers an aluminum-lithium alloy in the form of extruded profiles 0.040 to 1.000 inch (1.00 to 25.40 mm), inclusive, in nominal thickness (see 8.5).
This specification covers an aluminum alloy in the form of castings.
This standard establishes the common requirements for training of DPRV personnel for use at all levels of the aerospace engine supply chain. This standard shall apply when an organization elects to delegate product release verification by contractual flow down to its suppliers (reference 9100 and 9110 standards) and to perform product acceptance on its behalf. It is intended that organizations specify their DPRV requirements through the application of AS9117. While the delegating organization will use the AS13001 standard as the baseline for establishing DPRV process and product training, it may include additional contractual training requirements to meet its specific needs. The DPRV training material was primarily developed for aerospace engine supply chain requirements. However, this standard may also be used in other aerospace industry sectors where a DPRV process requiring specific training can be of benefit.
This SAE Aerospace Standard (AS) establishes supplemental requirements for 9100 and 9145 and applies to any organization receiving it as part of a purchase order or other contractual document from a customer. AS13100 also provides details of the reference materials (RM13xxx) developed by the SAE G-22 AESQ committee and listed in Section 2 that can also be used by organizations in conjunction with this standard.
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers a premium aircraft-quality, high-alloy steel gas-atomized and HIP-consolidated in the form of bars, wire, forgings, and forging stock.
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers a low-alloy steel in the form of investment castings.
This specification covers procedures for approval of premium-quality forgings, usually serialized, the stock from which such forgings are produced, and the controls to be exercised in producing the forgings and forging stock.
This specification covers an aircraft-quality, low-alloy, heat-resistant steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers materials in the form of a liquid used to remove smut from aluminum surfaces treated with etch-type oxidation and corrosion removers.
This specification covers a premium aircraft-quality, maraging alloy steel in the form of bars, forgings, mechanical tubing, flash welded rings up through 10.000 inches (254.00 mm), inclusive, in diameter or least distance between parallel sides and stock of any size for forging or flash welded rings.
This procurement specification covers aerospace quality safety cable kits consisting of safety cables and ferrules made from the same corrosion and heat resistant steels and a nickel base alloy of the type identified under the Unified Numbering System as follows: a. UNS S30400 - Corrosion resistant steel (AMS5697, AMS5560) b. UNS S32100 - Corrosion and heat resistant steel (AMS5689, AMS5570) c. UNS N06600 - Nickel base alloy (AMS5687, AMS5580) d. UNS N06625 - Nickel alloy, corrosion resistant (AMS5666, AMS5581) The requirements for installation practices are also specified.
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers quality assurance sampling and testing procedures used to determine conformance to applicable specification requirements of carbon and low-alloy steel forgings.
This specification covers steel cleanliness requirements for premium aircraft-quality ferromagnetic steels, including hardenable, corrosion-resistant steels, by magnetic particle inspection methods. This specification contains sampling, sample preparation, inspection procedures, and cleanliness rating criteria (see 8.2).
This specification covers aircraft-quality, low-alloy steel in the form of round, seamless tubing.
AMS6885/5 is the Material Specification (MS) which defines the requirements of a unidirectional carbon fiber tape epoxy repair prepreg capable of curing under vacuum for repair of carbon fiber reinforced epoxy structures. It also defines the requirements of an epoxy film adhesive to be applied in a co-bonding process with the prepreg for solid laminate and sandwich bonding.
This Purchasing Specification, AMS6885/3, specifies the batch release and delivery requirements for unidirectional carbon fiber tape epoxy prepreg used for repair. This specification is applicable only when the unidirectional carbon fiber tape epoxy prepreg is used as part of the repair system defined in AMS6885 and AMS6885/1. This specification also defines the procedure and requirements for storage life extension of materials purchased against this specification. It is only applicable for materials qualified against AMS6885 (refer to PRI-QPL-AMS6885) and shall be carried out within the responsibility of the purchaser and under control of its Quality organisation.
This specification covers a free-cutting carbon steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers an alloy steel in the form of investment castings.
This specification covers carbon steel (1025) tubing of aircraft quality.
This specification covers a premium-aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, and forging stock.
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers quality assurance sampling and testing procedures used to determine conformance to applicable material specification requirements of wrought carbon and low-alloy steel products and of forging stock.
This specification covers a carbon steel in the form of wire supplied as coils, spools, or cut lengths (see 8.2).
This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate up to and including 1.500 inches (38.10 mm) in thickness.
This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.
This practice provides a method for evaluating microhardness and microstructure very close (0.002 inch (0.051 mm) or less) to the surface of a disk specimen. Specific accept/reject criteria for partial decarburization (3.7.1), inadvertent carburization/nitriding (3.7.3), total decarburization/intergranular oxidation (3.8), and other characteristics evaluated are to be found in the applicable specification where this ARP is referenced.
Items per page:
50
1 – 50 of 219468