Search
Advanced Search
of the following are true
(
)

Results

Items (216,100)
Missile Hydraulic Pumps and Their Power SourcesAIR560D (Current)
This AIR provides information about the specific requirements for missile hydraulic pumps and their associated power sources.
A-6C4 Power Sources Committee
Engine Rotation and Cylinder NumberingJ824_202206 (Current)6/29/2022
This SAE Standard was developed to provide a method for indicating the direction of engine rotation and numbering of engine cylinders. The document is intended for use in designing new engines to eliminate the differences which presently exist in industry.
Engine Power Test Code Committee
Evaluation Criteria for Reliability-Centered Maintenance (RCM) ProcessesJA1011_202411 (Current)11/6/2024
This SAE Standard for reliability-centered maintenance (RCM) is intended for use by any organization that has or makes use of physical assets or systems that it wishes to manage responsibly.
G-11M, Maintainability, Supportability and Logistics
Electromagnetic Compatibility Measurement Procedure for Vehicle Components—Part 22—Immunity to Radiated Magnetic FieldsJ1113/22_201008 (Current)8/11/2010
This SAE Standard specifies the test methods and procedures for vehicle components to determine the components immunity to radiated magnetic fields.
Electromagnetic Compatibility (EMC) Standards
Fluid, Reference for Testing Polyalphaolefin (PAO) Resistant MaterialAMS3400A (Current)9/8/2022
This specification covers a polyalphaolefin/ester-blend fluid.
AMS CE Elastomers Committee
Alloy Wire, Round 35Pd - 30Ag - 14Cu - 10Au - 10Pt - 0.85Zn Solution Heat TreatedAMS7735E (Current)3/4/2018
This specification covers a palladium-silver alloy in the form of round wire 0.004 to 0.080 inch (0.10 to 2.03 mm) inclusive, in nominal diameter (see 8.5).
AMS D Nonferrous Alloys Committee
Webbing, Woven Nylon Fabric 12,000 Pounds (53,400 N), 3.3 Ounces/Yards (102.5 g/m)AMS3795/3B (Current)6/13/2016
This specification covers one strength and weight of nylon fabric in the form of webbing.
AMS P Polymeric Materials Committee
Webbing, Nylon, Integral Locking Slots 1-1/16 (27) Wide, 7000 (31,138) Breaking StrengthAMS3797/7C (Current)4/14/2015
This specification covers one width and one strength of integral locking slot nylon webbing.
AMS P Polymeric Materials Committee
Type 16 15% Polyimide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or ExtrusionsAMS3678/16A (Current)2/29/2016
This specification covers a polytetrafluoroethylene (PTFE) resin filled with 15% polyimide in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
AMS P Polymeric Materials Committee
Trace Element Control Nickel Alloy, Cobalt Alloy, and Iron Alloy Wrought Products for High-Temperature, High-Stressed ApplicationsAMS2281B (Current)1/17/2013
This specification establishes maximum permissible limits for elements not normally specified but which may occur in trace amounts in wrought nickel, cobalt, and iron alloy products.
AMS F Corrosion and Heat Resistant Alloys Committee
Webbing, Low Modulus Aramid 9/16 (14) Wide, 500 (2224) Breaking Strength Herringbone Twill, Resin TreatedAMS3798/1C (Current)4/14/2015
This specification covers one width and one breaking strength of low-modulus aramid webbing.
AMS P Polymeric Materials Committee
Polytetrafluoroethylene (PTFE) Sheet, Molded General Purpose Grade, As SinteredAMS3667E (Current)8/25/2011
This specification covers virgin, unfilled polytetrafluoroethylene (PTFE) in the form of sheet, manufactured by compression molding and sintering.
AMS P Polymeric Materials Committee
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For Hand and Machine Layup GL-I-36 - 120 (248)AMS3906/1C (Current)10/12/2016
This specification covers one type of epoxy-resin-impregnated, non-woven, glass fiber in the form of tape for hand or machine layup and of flat sheet.
AMS P17 Polymer Matrix Composites Committee
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1/2 Inch (12.5 mm), 0.06 to 0.56 Ounces per Yard (1.9 to 17.4 g/m)AMS3793/1B (Current)9/11/2013
This specification covers four classes of para-aramid tape and webbing of a single width and with varying weights.
AMS P Polymeric Materials Committee
Webbing, Nylon, Integral Locking Slots 1-1/16 (27) Wide, 8000 (35,586) Breaking StrengthAMS3797/8C (Current)4/14/2015
This specification covers one width and one strength of integral locking slot nylon webbing.
AMS P Polymeric Materials Committee
Integrated Project Processes for Engineering a SystemSAE1001 (Current)10/9/2018
This standard is applicable to the engineering or the reengineering of: a Commercial or non-commercial systems, or portions thereof; b Any system, small or large, simple or complex, software-intensive or not, precedented or unprecedented; c Systems made up of hardware, software, firmware, personnel, facilities, data, materials, services, techniques, or processes (or combinations thereof); d A new system or a legacy system, or portions thereof. The requirements of this standard, or a designated subset, are intended to be applied by projects establishing policies and procedures for project implementation of the adopted process and process elements of this standard. The requirements of this standard may be tailored as follows: a Processes – Processes may be tailored to be applicable for a given type of project or system. For example, the System Utilization Processes typically don’t apply for conceptual or prototype systems in the same manner as for full-volume production systems. b
G-47 Systems Engineering
IVHM Design GuidelinesARP6407 (Current)7/29/2019
This Aerospace Recommended Practice (ARP) provides guidance for the design of an integrated vehicle health management (IVHM) capability that will extend the vehicle’s inherent design to enable health management of the platform and its components. This guidance is technology-independent; the principles are generally applicable to the majority of potential IVHM design scenarios, including “clean sheet” system design, where IVHM is considered as a primary design consideration, and the retrofit design, where existing systems are modified and leveraged with the IVHM capability. In either case, this ARP provides guidance for designing the IVHM capability from the feasibility assessment to the conceptual design analysis and to the development design phases, with considerations given to trade studies, metrics, and life cycle impacts.
HM-1 Integrated Vehicle Health Management Committee
Copper-Zinc Alloy, Laminated Sheet, 70Cu - 30Zn, Surface BondedAMS4508K (Current)3/25/2026
This specification covers a copper-zinc alloy (brass) in the form of laminated sheet with nominal thickness 0.006 to 0.125 inch (0.15 to 3.18 mm) (see 8.5).
AMS D Nonferrous Alloys Committee
Safety and Cybersecurity Recommendations for the Use of the Rust Language in Critical SystemsJA1020_202603 (Current)3/26/2026
This document provides guidance to using Rust in critical and safety-related software. The document summarizes how the usage of Rust supports in arguing safety according to ISO 26262 or RTCA DO-178C combined with RTCA DO-332. Cybersecurity best practices are referenced as these requirements largely overlap with those implemented for safety. As the Rust language is still evolving, this document targets the 2021 and 2024 editions of the language. Older or newer editions might require additional or changed rules and guidelines. Generally, the newest available edition of the language should be selected as newer editions remove ambiguities and outdated parts from the language.
Functional Safety Committee
FITTINGS, INSTALLATION OF FLARELESS TUBE, STRAIGHT-THREADED CONNECTORSAS33566A (Current)3/30/2026
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Cyber-Physical Systems Security Engineering Plan (CPSSEP)JA7496_202206 (Current)6/2/2022
This SAE Standard establishes practices to: a Manage risk and ensure security of a cyber-physical system (CPS) throughout its life cycle by utilizing systems engineering principles; b Assess the impact of cyber-physical systems security (CPSS) objectives and requirements; c Assess the security risks to CPS technical effectiveness and functions, and address weaknesses and vulnerabilities; d Address various domains of consideration (see 3.1) that take into account operating conditions of the system, command and control, configuration management (refer to SAE EIA649), etc., that could negatively impact CPSS or CPS-designed purpose; e Perform design validation and verification to assess security and risk of the CPS.
G-32 Cyber Physical Systems Security Committee
SAE Technical Standards Board Rules and RegulationsTSB001_201411 (Current)11/14/2014
Executive Standards Committee
Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 15 Pounds/Cubic Foot (240 kg/m3) DensityAMS3568/2B (Current)8/25/2011
This specification covers a chemically or mechanically expanded polyether urethane (EU) elastomeric foam material in the form of ready-to-use sheet.
AMS P Polymeric Materials Committee
Rope, Aramid Fiber, Jacketed Cabled Strand, Extruded JacketAMS3813/1B (Current)6/15/2016
This specification covers cabled-strand ropes formed from impregnated aramid fibers.
AMS P Polymeric Materials Committee
TAPE, NYLON, NONMELTING, REINFORCING 2 (50) Wide, 2000 (8895 N) Breaking StrengthAMS3777/8 (Current)10/1/1995
This specification covers one width and strength of nylon tape.
AMS P Polymeric Materials Committee
Aluminum Sheet, Laminated Edge BondedAMS4012G (Current)7/28/2014
This specification covers an aluminum or aluminum alloy in the form of sheet, laminated and edge bonded.
AMS D Nonferrous Alloys Committee
Cloth, Parachute, Meta-Aramid, Low Modulus 6.5 (220) Weight, Special WeaveAMS3801/2C (Current)10/11/2016
This specification covers one weight and one weave of low-modulus meta-aramid cloth.
AMS P Polymeric Materials Committee
Performance Levels and Methods of Measurement of Electromagnetic Radiation From Vehicles and Devices, Narrowband, 10 Khz to 1000 MhzJ1816_198710 (Current)10/1/1987
With the advent of computer based electronics being utilized in automobiles, the Electromagnetic Radiation Subcommittee has deemed it prudent that a new test method be written to provide a common test for the measurement of narrowband radiation from vehicles and devices. This SAE Standard covers methods of measuring incidental narrowband radiation from vehicles and devices. The standard also establishes performance levels intended to protect nearby communication and broadcast receivers. It is intended to serve as an alternate method of measuring electromagnetic radiation which is analogous to the FCC Part 15 methodology but adapted to measuring vehicles. The equivalent procedures for broadband emissions are set forth in SAE J551. This standard covers narrowband emissions in the frequency range of 10 kHz to 1000 MHz. An example of such radiation is the unintended emission from on-board logic and computer modules. In particular, the standard is intended to provide protection to adjacent
Electromagnetic Compatibility (EMC) Standards
Stepping Surface Test Method for Heavy VehiclesJ3351_202602 (Current)2/12/2026
Define the test equipment and test procedures for measuring slip resistance for stepping, walking, and standing surfaces commonly used on heavy vehicles.
Truck and Bus Human Factors Committee
Chemical Compositions of SAE Alloy SteelsJ404_200901 (Current)1/27/2009
In 1941, the SAE Iron and Steel Division in collaboration with the American Iron and Steel Institute (AISI) made a major change in the method of expressing composition ranges for the SAE steels. The plan, as now applied, is based in general on narrower ladle analysis ranges plus certain product (check) analysis allowances on individual samples, in place of the fixed ranges and limits without tolerances formerly provided for carbon and other elements in SAE steels (reference SAE J408). ISTC Division 1 has developed a procedure which allows for the maintenance of the grade list in this SAE Standard. This will involve conducting an industry-wide survey to solicit input. This survey will be conducted at a frequency deemed necessary by the technical committee. Criteria have been established for the addition to or deletion of grades from the grade table. A new grade will be considered if it meets standard SAE grade ranges, has a minimum usage or production of 225 tonnes/year (250 tons/year
Metals Technical Committee
Immunity to Radiated Electromagnetic Fields; 10 kHz to 200 MHz - Crawford TEM Cell and 10 kHz to 5 GHz - Wideband TEM CellJ1113/24_201008 (Current)8/6/2010
This part of SAE J1113 specifies TEM cell test methods and procedures for testing the electromagnetic immunity of electronic components (DUTs) for passenger cars, commercial vehicles and similar applications. Methods using the constant cross-section TEM cell (Crawford TEM) and the flared cross-section TEM cell (wideband TEM) are discussed in the document. The electromagnetic disturbance considered in this part of SAE J1113 will be limited to continuous narrowband electromagnetic fields. TEM cells produce both electric and magnetic fields simultaneously. The test is directly applicable to DUTs whose height is less than 1/3 the septum height; somewhat larger modules can be tested with conditions applied. The Crawford TEM and wideband TEM cell may be used for testing within the 1/3 height condition without demonstrating field uniformity within the cell, if the test set-up complies with the other provisions of this standard. This test can be used for two purposes: a. Testing the immunity
Electromagnetic Compatibility (EMC) Standards
Aerospace Series - Quality Management Systems Statistical Product Acceptance RequirementsAS9138 (Current)1/20/2018
This standard establishes requirements when implementing statistical product acceptance methods to meet defined risk requirements. This standard also establishes the minimum content required to be covered in an organization’s documented procedures that govern their application of statistical product acceptance methods. These general requirements and documented procedures apply the requirements of the 9100/9110/9120 quality management system standards, in addition to establishing requirements for retrievability, safety/critical characteristics, and quality parameters that protect the customer.
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
Yarn, Organic Fiber (Para-Aramid), High Modulus 720 Denier, (800 d tex), 1.2% FinishAMS3901/17B (Current)7/31/2014
This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.
AMS P17 Polymer Matrix Composites Committee
Identification CastingsAMS2804D (Current)10/12/2017
This specification covers the requirements for identification of castings.
AMS B Finishes Processes and Fluids Committee
Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or ExtrusionsAMS3678/6B (Current)2/29/2016
This specification covers a polytetrafluoroethylene (PTFE) resin filled with 60% bronze powder in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
AMS P Polymeric Materials Committee
Tolerances Carbon and Alloy Steel TubingAMS2253F (Current)2/24/2018
This specification covers established inch/pound manufacturing tolerances applicable to carbon and alloy tubing ordered to inch/pound dimensions. These tolerances apply to all conditions unless otherwise noted. The term “excl” is used to apply only to the higher figure of the specified range.
AMS E Carbon and Low Alloy Steels Committee
Silicone Rubber Sponge Closed Cell, Medium, Extreme Low TemperatureAMS3193F (Current)6/14/2019
This specification covers a silicone rubber sponge in the form of sheet, strip, extrusions, and molded shapes.
AMS CE Elastomers Committee
Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 3000 Denier (3300 Dtex), 0.9% FinishAMS3904/9B (Current)8/1/2016
This specification covers one type of organic (para-aramid) fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.
AMS P17 Polymer Matrix Composites Committee
Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 1000 Denier (1110 Dtex), 1.0% FinishAMS3904/3C (Current)8/1/2016
This specification covers one type of organic (para-aramid) fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.
AMS P17 Polymer Matrix Composites Committee
Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 85 Durometer “A”AMS3571/5C (Current)9/23/2011
This specification covers one type of polyether-type urethane (EU) resin and hardener which, when mixed and cured, produce elastomeric polyurethane products.
AMS P Polymeric Materials Committee
Yarn, Organic Fiber (Para-Aramid), High Modulus 1420 Denier (1580 d tex), 0.6% FinishAMS3901/4D (Current)7/30/2014
AMS P17 Polymer Matrix Composites Committee
Plating, Brush, Zinc-Nickel Low Hydrogen EmbrittlementAMS2451/9C (Current)5/24/2023
This specification covers the requirements for brush plating of zinc-nickel by electrodeposition.
AMS B Finishes Processes and Fluids Committee
Thread, Para-Aramid Intermediate Modulus 2000 yards per pound (4032 m/kg), 80 pounds force (356 N) Breaking StrengthAMS3787/5B (Current)6/14/2016
This specification covers one weight and strength of para-aramid thread.
AMS P Polymeric Materials Committee
Copper Wire, Oxygen-Free 99.95(Cu+Ag) AnnealedAMS4701H (Current)8/8/2015
This specification covers one type of copper in the form of wire.
AMS D Nonferrous Alloys Committee
Test Slabs, Fluoroelastomer (FKM) 65 - 75AMS3217/4C (Current)2/23/2017
This specification covers a standard fluoroelastomer (FKM) rubber stock in the form of molded test slabs.
AMS CE Elastomers Committee
Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 120, 80 (180)AMS3903/5B (Current)11/11/2016
This specification covers one type of epoxy-resin-impregnated organic fibers in the form of woven cloth.
AMS P17 Polymer Matrix Composites Committee
Vehicle Electromagnetic Immunity - Power Line Magnetic FieldsJ551/17_201507 (Current)7/22/2015
This SAE Standard specifies the test methods and procedures for testing passenger cars and commercial vehicles to magnetic fields generated by power transmission lines and generating stations. SAE J551-1 specifies general information, definitions, practical use, and basic principles of the test procedure.
Electromagnetic Compatibility (EMC) Standards
Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus 0.25 ounce per linear yard (9.6 g/linear m)AMS3782/1B (Current)9/10/2013
This specification covers one weight and type of para-aramid webbing.
AMS P Polymeric Materials Committee
Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 33 (228) Tensile ModulusAMS3892/7B (Current)12/15/2016
This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the supplier's grade or material designation.
AMS P17 Polymer Matrix Composites Committee
Thread, Para-Aramid Intermediate Modulus 6700 yards per pound (13,507 m/kg), 25 pounds force (111 N) Breaking StrengthAMS3787/2B (Current)6/14/2016
This specification covers one weight and strength of para-aramid thread.
AMS P Polymeric Materials Committee
Items per page:
1 – 50 of 216100