Search
Advanced Search
of the following are true
(
)

Results

Items (216,088)
Missile Hydraulic Pumps and Their Power SourcesAIR560D (Current)
This AIR provides information about the specific requirements for missile hydraulic pumps and their associated power sources.
A-6C4 Power Sources Committee
Test Procedures for Shear Strength of Automotive Brake Pads and Brake Lining AssembliesJ840_202603 (Current)3/31/2026
This SAE Recommended Practice covers equipment capabilities and the test procedure to quantify and qualify the shear strength between the friction material and backing plate or brake shoe for automotive applications. This SAE Recommended Practice is applicable to: bonded drum brake linings; integrally molded disc brake pads; disc brake pads and backing plate assemblies using mechanical retention systems (MRS); coupons from drum brake shoes or disc brake pad assemblies. The test and its results are also useful for short, semi-quantitative verification of the bonding and molding process. This Recommended Practice is applicable during product and process development, product verification and quality control. This Recommended Practice does not replicate or predict actual vehicle performance or part durability.
Brake Linings Standards Committee
FITTINGS, INSTALLATION OF FLARELESS TUBE, STRAIGHT-THREADED CONNECTORSAS33566A (Current)3/30/2026
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), .1900-32 UNJF-3AAS3303B (Current)3/30/2026
E-25 General Standards for Aerospace and Propulsion Systems
STUD - STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS S66286), .3125-18 UNJC X .3125-24 UNJFAS3321F (Current)3/30/2026
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, TEE HEAD – CHAMFERED, PD SHANK NICKEL ALLOY (UNS N07001),165 KSI MIN UTS .3750-24 UNJF-3AAS3235D (Current)3/30/2026
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), .2500-28 UNJF-3AAS3307B (Current)3/30/2026
E-25 General Standards for Aerospace and Propulsion Systems
Copper-Zinc Alloy, Laminated Sheet, 70Cu - 30Zn, Surface BondedAMS4508K (Current)3/25/2026
This specification covers a copper-zinc alloy (brass) in the form of laminated sheet with nominal thickness 0.006 to 0.125 inch (0.15 to 3.18 mm) (see 8.5).
AMS D Nonferrous Alloys Committee
Evaluation Criteria for Reliability-Centered Maintenance (RCM) ProcessesJA1011_202411 (Current)11/6/2024
This SAE Standard for reliability-centered maintenance (RCM) is intended for use by any organization that has or makes use of physical assets or systems that it wishes to manage responsibly.
G-11M, Maintainability, Supportability and Logistics
Safety and Cybersecurity Recommendations for the Use of the Rust Language in Critical SystemsJA1020_202603 (Current)3/26/2026
This document provides guidance to using Rust in critical and safety-related software. The document summarizes how the usage of Rust supports in arguing safety according to ISO 26262 or RTCA DO-178C combined with RTCA DO-332. Cybersecurity best practices are referenced as these requirements largely overlap with those implemented for safety. As the Rust language is still evolving, this document targets the 2021 and 2024 editions of the language. Older or newer editions might require additional or changed rules and guidelines. Generally, the newest available edition of the language should be selected as newer editions remove ambiguities and outdated parts from the language.
Functional Safety Committee
Cyber-Physical Systems Security Engineering Plan (CPSSEP)JA7496_202206 (Current)6/2/2022
This SAE Standard establishes practices to: a Manage risk and ensure security of a cyber-physical system (CPS) throughout its life cycle by utilizing systems engineering principles; b Assess the impact of cyber-physical systems security (CPSS) objectives and requirements; c Assess the security risks to CPS technical effectiveness and functions, and address weaknesses and vulnerabilities; d Address various domains of consideration (see 3.1) that take into account operating conditions of the system, command and control, configuration management (refer to SAE EIA649), etc., that could negatively impact CPSS or CPS-designed purpose; e Perform design validation and verification to assess security and risk of the CPS.
G-32 Cyber Physical Systems Security Committee
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .3125-24 UNJF-3AAS3176B (Current)9/11/2019
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, MACHINE - HEXAGON, DRILLED, 6 HOLES, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3AAS9586C (Current)6/3/2019
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .1900-32 UNJF-3AAS3147B (Current)3/28/2019
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .5000-20 UNJF-3AAS3179B (Current)10/14/2019
E-25 General Standards for Aerospace and Propulsion Systems
Steel, Corrosion and Heat-Resistant, Investment Castings 19Cr - 9.5Ni (CF-3) Solution Heat TreatedAMS5370E (Current)11/3/2023
This specification covers a corrosion and heat-resistant steel in the form of investment castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel Bars, Forgings, and Tubing 1.0Cr - 3.2Ni - 0.2Mo (0.12 - 0.17C) Aircraft-QualityAMS6547A (Current)6/3/2018
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
AMS E Carbon and Low Alloy Steels Committee
Alloy Iron Castings, Ductile, Sand, Corrosion Resistant 22Ni (2.5 - 3.0C) As CastAMS5395D (Current)3/4/2018
This specification covers a corrosion-resistant alloy ductile iron in the form of sand castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Highly-Stressed Springs 0.95Cr - 0.20V (0.48 - 0.53C) (SAE 6150) Case HardenedAMS7301J (Current)8/14/2017
This specification covers low-alloy steel springs made of annealed round wire heat treated after forming.
AMS E Carbon and Low Alloy Steels Committee
Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction MeltedAMS5751F (Current)4/6/2017
This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Corrosion- and Heat-Resistant, Bars, Forgings, and Mechanical Tubing 14.5Cr - 2.3Ni - 12.5Co - 4.0Mo - 0.60V - 0.03Cb(Nb) Carburizing, Premium Aircraft-Quality, Double Vacuum MeltedAMS5932C (Current)11/18/2022
This specification covers a premium aircraft-quality corrosion and heat-resistant steel in the form of bars, forgings, mechanical tubing, and forging stock.
AMS F Corrosion and Heat Resistant Alloys Committee
Metal Injection Molded Nickel Based Alloy 718 Parts Hot Isostatically Pressed, Solutioned and AgedAMS5917 (Current)5/12/2022
This specification covers a corrosion and heat-resistant nickel alloy in the form of metal injection molded (MIM) parts.
AMS F Corrosion and Heat Resistant Alloys Committee
Butyl (IIR) Rubber Phosphate Ester Resistant 35 - 45AMS3237G (Current)4/18/2018
This specification covers a butyl (IIR) rubber in the form of sheet, strip, extrusions, and molded shapes.
AMS CE Elastomers Committee
Alloy Bars, Forgings, and Rings, Corrosion- and Heat-Resistant 73Ni - 15.5Cr - 2.5Ti - 0.70Al - 7.0Fe Precipitation HardenableAMS5714E (Current)11/18/2022
This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, and flash welded rings up to 4.000 inch (101.6 mm), inclusive, in nominal thickness or distance between parallel sides, and stock of any size for forging or flash welded rings (see 8.6).
AMS F Corrosion and Heat Resistant Alloys Committee
Steel Bars and Forgings, Corrosion and Moderate Heat-Resistant 15Cr - 7.1Ni - 2.5Mo - 1.1AlAMS5657D (Current)4/5/2017
AMS F Corrosion and Heat Resistant Alloys Committee
Cobalt Alloy, Corrosion and Heat Resistant, Bars 62Co-28Cr-6Mo Warm-WorkedAMS5918 (Current)5/12/2022
This specification covers a corrosion and heat-resistant cobalt-chromium-molybdenum alloy in the form of bars.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile StrengthAMS5356D (Current)11/18/2022
This specification covers a corrosion resistant steel in the form of investment castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Heat Treatment Austenitic Corrosion-Resistant Steel PartsAMS2759/4D (Current)9/18/2025
This specification, in conjunction with the general requirements for steel heat treatment covered in AMS2759, establishes the requirements for annealing of austenitic corrosion-resistant steel parts. Parts are defined in AMS2759. General ordering instructions are specified in AMS2759.
AMS F Corrosion and Heat Resistant Alloys Committee
Pressure Altimeter SystemsAS8009C (Current)8/4/2022
This SAE Aerospace Standard (AS) specifies minimum performance requirements for pressure altimeter systems other than air data computers. This document covers altimeter systems that measure and display altitude as a function of atmospheric pressure. The pressure transducer may be contained within the instrument display case or located remotely. Requirements for air data computers are specified in AS8002. Some requirements for nontransducing servoed altitude indicators are included in AS791. This document does not address RVSM requirements because general RVSM requirements cannot be independently detailed at the component level. The instrument system specified herein does not include aircraft pressure lines. Unless otherwise specified, whenever the term “instrument” is used, it is to be understood to be the complete system of pressure transducer components, any auxiliary equipment, and display components. The test procedures specified herein apply specifically to mechanical type
A-4ADWG Air Data Subcommittee
MINIMUM PERFORMANCE STANDARD FOR DIRECTION INSTRUMENT, MAGNETIC (GYROSCOPICALLY STABILIZED)AS8013A (Current)2/16/2008
This SAE Aerospace Standard (AS) establishes the minimum requirements for design and qualification of equipment identified as Gyroscopically Stabilized Magnetic Direction Instruments.
A-4 Aircraft Instruments Committee
Vertical Velocity Instrument (Rate-of-Climb)AS8016A (Current)6/19/2023
This AS covers Vertical Velocity Instruments which display the rate of change of pressure altitude of an aircraft, as follows: Type A - Direct reading, self-contained, pressure actuated Type B - Electrically or electronically operated, self-contained, pressure actuated Type C - Electrically or electronically operated, input from a remote pressure sensor
A-4ADWG Air Data Subcommittee
BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .1900-32 UNJF-3AAS9208C (Current)6/22/2015
E-25 General Standards for Aerospace and Propulsion Systems
Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 11Ni - 2Mo - 1.5Al - 0.3Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation HardenableAMS5937A (Current)11/2/2018
This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, and forging stock.
AMS F Corrosion and Heat Resistant Alloys Committee
Alloy Castings, Investment, Corrosion and Heat Resistant 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution and Precipitation Heat TreatedAMS5384F (Current)4/4/2017
This specification covers a corrosion and heat resistant nickel alloy in the form of investment castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant Nickel Base - 15.5Cr - 16Mo - 3.8W - 5.5Fe Solution Heat TreatedAMS5750D (Current)4/5/2017
This specification covers a corrosion and heat resistant nickel-base alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Welding Wire 1.75Mn - 0.78Cr - 2.8Ni - 0.85Mo - (0.09 - 0.12C) Vacuum Melted, Environment-Controlled PackagingAMS6469E (Current)10/26/2016
This specification covers a low-alloy steel in the form of welding wire.
AMS E Carbon and Low Alloy Steels Committee
Steel, Welding Wire 0.65Si - 1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C)AMS5035C (Current)12/23/2014
This specification covers a low-alloy steel in the form of welding wire.
AMS E Carbon and Low Alloy Steels Committee
Nickel Alloy, Corrosion- and Heat-Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat TreatedAMS5590G (Current)5/16/2023
This specification covers a corrosion and heat-resistant nickel alloy in the form of seamless tubing having nominal OD of 0.125 inch (3.18 mm) and over with nominal wall thickness of 0.015 inch (0.38 mm) and over (see 8.5).
AMS F Corrosion and Heat Resistant Alloys Committee
Steel Bars, Forgings, and Tubing 1.0Cr - 3.2Ni - 0.2Mo (0.12 - 0.17C) Premium Aircraft-Quality Double Vacuum MeltedAMS6549A (Current)6/3/2018
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
AMS E Carbon and Low Alloy Steels Committee
Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 25Cr - 20Ni (310S) Solution Heat TreatedAMS5521K (Current)3/1/2019
This specification covers a corrosion and heat-resistant steel in the form of sheet, strip, and plate.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Low Carbon Bars, Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, MaximumAMS5062J (Current)8/14/2017
This specification covers low-carbon steel in the form of bars, forgings, mechanical tubing, sheet, strip, plate, and forging stock.
AMS E Carbon and Low Alloy Steels Committee
Nickel-Copper Alloy, Corrosion Resistant, Bars and Forgings 66.5Ni - 2.9Al - 30Cu AnnealedAMS4677C (Current)2/3/2022
This specification covers a corrosion-resistant nickel-copper alloy in the form of bars, forgings, and forging stock.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel Castings, Sand and Centrifugal, Corrosion and Heat Resistant 18.5Cr - 10.5Ni - 0.90 (Cb+Ta) Solution Heat TreatedAMS5363F (Current)4/4/2017
This specification covers a corrosion and heat resistant steel in the form of sand or centrifugal castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Corrosion Resistant, Investment Castings 14Cr - 4.25Ni - 2.25Mo - 0.25Cb - 3.25Cu Homogenization and Solution Heat TreatedAMS5340E (Current)3/4/2018
This specification covers a corrosion-resistant steel in the form of investment castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Rings, Flash Welded Ferritic and Martensitic Corrosion-Resistant SteelsAMS7493L (Current)9/23/2025
This specification covers flash welded rings made of ferritic and martensitic corrosion-resistant steels.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Bars and Forgings, Corrosion Resistant 17Cr - 7Ni - 1AlAMS5644E (Current)4/4/2017
AMS F Corrosion and Heat Resistant Alloys Committee
Carbon Steel, Wire Spring Quality Music Wire 0.70 - 1.00C Cold DrawnAMS5112N (Current)6/24/2024
This specification covers a carbon steel in the form of wire supplied as coils, spools, or cut lengths (see 8.2).
AMS E Carbon and Low Alloy Steels Committee
Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) As CastAMS5402D (Current)5/16/2023
This specification covers a corrosion and heat-resistant, air-melted, nickel alloy in the form of investment castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Bars, Wire, and Forgings 10.5Mo - 6W - 3.75Cr - 2V (1.25 - 1.40C) Powder Metallurgy Product Hot Isostatically PressedAMS6558A (Current)5/16/2023
This specification covers a premium aircraft-quality, high-alloy steel gas-atomized and HIP-consolidated in the form of bars, wire, forgings, and forging stock.
AMS E Carbon and Low Alloy Steels Committee
Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold FinishedAMS5624F (Current)4/4/2017
This specification covers an alloy steel in the form of bars 1 inch (25.4 mm) and under in nominal diameter or distance between parallel sides.
AMS F Corrosion and Heat Resistant Alloys Committee
Items per page:
1 – 50 of 216088