This content is not included in your SAE MOBILUS subscription, or you are not logged in.
- Ground Vehicle Standard
Published July 17, 2020 by SAE International in United States
Downloadable datasets availableAnnotation ability available
This SAE Standard provides general, dimensional, and performance specifications for the most common hoses used in hydraulic systems on mobile and stationary equipment.
The general specifications contained in Sections 1 through 12 are applicable to all hydraulic hoses and supplement the detailed specifications for the 100R-series hoses contained in the later sections of this document (see Tables 1 and 2).
This document shall be utilized as a procurement document only to the extent as agreed upon by the manufacturer and user.
The maximum working pressure of a hose assembly comprising SAE J517 hose and hose connectors per SAE J516, SAE J518, SAE J1453, etc., shall not exceed the lower of the respective SAE maximum working pressure values.
When using SAE J517 hose for marine applications, refer to SAE J1475, SAE J1942, and SAE J1942-1.
The SAE J517 100R9, 100R10, and 100R11 hoses were discontinued due to lack of demand. For DOD orders, see Appendix C.
The SAE J517 100R1A, 100R2A, 100R2B, and 100R 2BT were discontinued due to lack of demand. For DOD orders, replace 100R1A with 100R1AT, and replace 100R2A, 100R2B, and 100R2BT with 100R2AT.
The SAE J517 100R1AT maximum working pressures were replaced by the type S maximum working pressures beginning with the year 2009, eliminating the need to label 100R1 as type S.
The SAE J517 100R2AT maximum working pressures were replaced by the type S maximum working pressures beginning with the year 2009, eliminating the need to label 100R2 as type S.
The SAE J517 100R16 maximum working pressures were replaced by the type S maximum working pressures beginning with the year 2009, eliminating the need to label 100R16 as type S.
Replaced Tables 36, 37, and 38 with Appendices A, B, and C as they were in previous editions, to correct improper references. Changed the word “hose” for “hoses” in multiple locations, to agree with the use of the plural instead of the singular to describe more than one hose. Added the word “metric” in multiple locations, to describe the hose sizes. Deleted SAE J1401 from the references since the use of the color yarn was not updated since 1998 and is no longer mandatory. Replaced the Rubber Manufacturers Association with the ARPM (Association for Rubber Products Manufacturers). Changed the temperature requirements for spiral hoses from 121 to 120 °C.
Data Sets - Support Documents
|Unnamed Dataset 1|
|Unnamed Dataset 2|
|Unnamed Dataset 3|
|Unnamed Dataset 4|
|Unnamed Dataset 5|
|Unnamed Dataset 6|
|Table 1||Summary of SAE J517 100R-series hose maximum working pressures (MPa) metric hose size (SAE dash size)|
|Table 2||Summary of SAE J517 100R-series hose maximum working pressure (MPa) metric hose size (SAE dash size)|
|Unnamed Dataset 9|
|Unnamed Dataset 10|
|Table 3||Tolerances on assembly length|
|Table 4||SAE J517 qualification test requirements|
|Table 4||SAE J517 qualification test requirements (continued)|
|Table 5||Dimensions and specifications for SAE 100R1 hoses|
|Table 6||Hose concentricity (100R1)|
|Table 7||Dimensions and specifications for SAE 100R2 hoses|
|Table 8||Hose concentricity (100R2)|
|Table 9||Dimensions and specifications for SAE 100R3 hoses|
|Table 10||Hose concentricity (100R3)|
|Table 11||Dimensions and specifications for SAE 100R4 hoses|
|Table 12||Dimensions and specifications for SAE 100R5 hoses|
|Table 13||Hose concentricity (100R5)|
|Table 14||Dimensions and specifications for SAE 100R6 hoses|
|Table 15||Hose concentricity (100R6)|
|Table 16||Dimensions and specifications for SAE 100R7 hoses|
|Table 17||Hose concentricity (100R7)|
|Table 18||Dimensions and specifications for SAE 100R8 hoses|
|Table 19||Hose concentricity (100R8)|
|Table 20||Dimensions and specifications for SAE 100R12 hoses|
|Table 21||Hose concentricity (100R12)|
|Table 22||Dimensions and specifications for SAE 100R13 hoses|
|Table 23||Hose concentricity (100R13)|
|Table 24||Dimensions and specifications for SAE 100R14 hoses|
|Table 25||Hose tube dimensions and concentricity (100R14)|
|Table 26||Dimensions and specifications for SAE 100R15 hoses|
|Table 27||Hose concentricity (100R15)|
|Table 28||Dimensions and specifications for SAE 100R16 hoses|
|Table 29||Hose concentricity (100R16)|
|Table 30||Dimensions and specifications for SAE 100R17 hoses|
|Table 31||Hose concentricity (100R17)|
|Table 32||Dimensions and specifications for SAE 100R18 hoses|
|Table 33||Hose concentricity (100R18)|
|Table 34||Dimensions and specifications for SAE 100R19 hoses|
|Table 35||Hose concentricity (100R19)|
|Table A1||MPa to psi conversion table|
|Table B1||Hose codes|
|Table C1||Replacement recommendations for 100R9, 100R10, and 100R11 spiral hoses|
Hydraulic Hose and Hose Fittings Committee
The Hydraulic Hose and Hose Fittings Subcommittee of the FCCTC develops and maintains SAE Standards, Recommended Practices and Information Reports relating to hydraulic hose and hose fittings with an intended use in pressure applications. Participants in the FCCTC Hydraulic Hose and Hose Fittings Subcommittee include OEMs, suppliers, consulting firms, government and other interested parties.
* Redlines comparisons are available for those standards listed in the Revision History that contain a radio button. A redline comparison of the current version against a revision is accomplished by selecting the radio button next to the standard and then selecting 'compare'. At this time, Redline versions only exist for some AMS standards. SAE will continue to add redline versioning with ongoing updates to SAE MOBILUS.