This revision of the SAE J3080 includes typographical corrections and provides the proper internal references to other sections or items in the document. The original rationale from the original release is still applicable.
Brake rotor cracks on commercial vehicles can compromise the structural integrity of the foundation brake. These failures can amount to significant maintenance and downtime costs. In order to provide an early assessment of this failure mode, vehicle manufacturers as well as brake suppliers have developed multiple laboratory test procedures. These procedures determine (using different test methods and test approaches) the propensity of a given friction couple (brake rotor and friction material) to develop cracks which can render the brakes out-of-service.
It is the objective of this Recommended Practice (RP) to establish a uniform and industry-endorsed laboratory method which reflects the most commonly used inertia dynamometer test procedure. This RP harmonizes the test conditions when applicable, and determines the minimum requirements for the test system used to conduct the test. The two methods included on this RP reflect the two main approaches to rotor crack testing. Method A uses a bedding cycle at 200 °C and 300 °C, and incorporates performance (torque output) versus pressure during the bedding; Method B uses a single bedding cycle at 150 °C. This RP also presents the method and criteria to assess and report rotor cracks. This RP applies when comparing test results to a baseline, a product specification, or a legacy product design.
SAE J3080 has been reaffirmed to comply with the SAE Five-Year Review policy.