This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Low Speed Thorax Impact Test Procedure for the HIII5F Dummy
- Ground Vehicle Standard
- J2878_202206
- Reaffirmed
Sector:
Issuing Committee:
Language:
English
Scope
This procedure establishes a recommended practice for performing a Low Speed Thorax Impact Test to the Hybrid III Small Female Anthropomorphic Test Device (ATD or crash dummy). This test was created to satisfy the demand by the industry to have a certification test which results in peak chest deflection similar to current full vehicle, frontal impact tests. An inherent problem exists with the current certification procedure because the normal (6.7 m/s) thorax impact test has test results for peak chest deflection that are greater than those currently seen in full vehicle, frontal tests.
The intent of this document is to develop a low speed thorax certification procedure for the H-III5F dummy with a 3.0 m/s impact similar to the SAE J2779 procedure for the H-III50M dummy.
Rationale
Section 2.1.1 SAE EA-25 was replaced by SAE J2862.
Section 2.2.1 Company name and link replaced with text indicating working link where documents can be obtained.
Section 3.3 Change upper limit of hysteresis corridor from 72 to 79.
SAE J2878 has been reaffirmed to comply with the SAE Five-Year Review policy.
Recommended Content
| Ground Vehicle Standard | Low Speed Thorax Impact Test Procedure for the HIII 50th Male Dummy |
| Ground Vehicle Standard | Sign Convention for Vehicle Crash Testing |
| Ground Vehicle Standard | Hybrid III Family Chest Potentiometer Calibration Procedure |
Topic
Data Sets - Support Documents
No Datasets Available
Issuing Committee
Dummy Testing and Equipment Committee
The Dummy Testing Equipment Committee (DTEC) is a group of experts with experience in the area of certification and handling of Anthropomorphic Test Devices (ATD), more commonly known as crash test dummies, and equipment related to ATD. The DTEC seeks to standardize the use and certification of ATD so that test data are both repeatable and reproducible.
Reference
| Number | Title |
|---|---|
| EA-25 | This document is not part of the subscrption. |
| J211/1_201403 | Instrumentation for Impact Test - Part 1 - Electronic Instrumentation |
| J2517_201608 | Hybrid III Family Chest Potentiometer Calibration Procedure |
| J2779_201507 | Low Speed Thorax Impact Test Procedure for the HIII 50th Male Dummy |
| MVRNo.572 | This document is not part of the subscrption. |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.