This SAE Recommended Practice takes into account modern standardized methods for collecting and summarizing data that has an effect on vehicle steady-state performance, such as engine output, gross and net, transmission losses, drivetrain efficiency, vehicle air drag reduction devices for various vehicle and body configurations, as well as road surface variations and air density variations resulting from altitude and barometric effects. The procedure does not address vehicle transient performance (acceleration, braking, and cornering), because of the considerable amount of additional data required such as moment of inertia of all the rotating parts. Nor does it address vehicles with torque converters and automatic transmissions. This document is therefore intended for vehicles having fixed ratio type transmissions and positive engagement clutches, used on the USA road system. As such, the procedure assumes input and output will be in FPS units, because these are the units used for USA transport systems. Metric and ISO unit conversions are provided in the metric conversion tables at the end of this procedure (see Appendix B).
Some modern vehicles with electronic engine controls have the ability to vary the maximum engine revolutions for each gear, as well as permitting the power or rpm to increase if more time is spent in the lower gears, as when climbing a grade. These special cases can be handled by this procedure, just by customizing the data for each transmission ratio and superimposing the long-term data on top of the instantaneous data.
All of the equations are written in a form suitable for programming into a mainframe or desk-top computer, using a spreadsheet/database or a higher level language, such as basic, fortran, pascal, C or unix, etc. However, they are simple enough also, to be performed on a modern hand-held calculator.
The Truck and Bus Powertrain Committee reports to the Truck and Bus Total Vehicle Steering Committee. The committee initiates, develops, reviews and approves standards, recommended practices and technical information reports related to heavy duty power trains. This includes 1) conventional energy management (diesel), alternative fuels (natural gas), mechanical energy storage (flywheels), electrical energy storage, (ultracapacitors), and pneumatic (compressed air, hydraulic hybrids); 2) power generation and conversion (diesel engines, generators, traction motors, hydraulic pumps and motors, retarders); 3) power and torque transmission (manual and automated transmissions, clutches, differentials, axles and drive shafts); 4) accessories and accessory drives; 5) any new technology that may arise that is related to heavy duty truck & bus power trains.
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.
View/Annotate
Content Loading, Please Wait
Document Preview
Content Loading, Please Wait
Document Comparison
Content Loading, Please Wait
Download
A list of downloadable items.
Product Code
Document Title
File Type
Download
J2188_199603
COMMERCIAL TRUCK AND BUS SAE RECOMMENDED PROCEDURE FOR VEHICLE PERFORMANCE PREDICTION AND CHARTING
Export Metadata
This modal will allow the user to download citation information or export specific fields of data into one of three file formats: Excel, comma-separated values, or text.
You are currently not logged into your Dashboard account, which is required for annotating.
Please select Login to login or register for the Dashboard. Select Continue to view the content without the ability to annotate.
Redline Warning
You are currently not logged into your Dashboard account, which is required for annotating.
Please select Login to login or register for the Dashboard. Select Continue to view the content without the ability to annotate.
Data Set Warning
COMMERCIAL TRUCK AND BUS SAE RECOMMENDED PROCEDURE FOR VEHICLE PERFORMANCE PREDICTION AND CHARTING
SAE Journal Subscriptions are available in a variety of options, which include electronic, electronic with back file, and archive. For detailed information and options, please complete the following:
Content Request
Check My Access!
You may already have access to the Ground Vehicle Standard, COMMERCIAL TRUCK AND BUS SAE RECOMMENDED PROCEDURE FOR VEHICLE PERFORMANCE PREDICTION AND CHARTING
Subscription Access
If you have Subscription Access with a username and password, please login below.
Institutional Login
If you have Institutional Access to SAE MOBILUS, using a predetermined organizational login utilizing single-sign-on (Shibboleth), please login below. To request institutional access to SAE MOBILUS, please complete the institutional subscription information form.
Purchase
If you do not have access to SAE MOBILUS via username/password or institutional access, you can still purchase the Ground Vehicle Standard, COMMERCIAL TRUCK AND BUS SAE RECOMMENDED PROCEDURE FOR VEHICLE PERFORMANCE PREDICTION AND CHARTING.
Search Tips: Search Operators:AND, OR, NOT; Wild Cards; Using Quotes
SAE MOBILUS® Search Tips
Please note: All terms not contained within quotes, will be evaluated using the OR operator. This means that your search results will contain all results that contain ANY of the entered terms.
AND, OR, NOT
SAE MOBILUS supports the use of the AND, OR and NOT BOOLEAN operators ONLY function with the Advanced Search.
Wild Cards
Using the asterisk, ( * ) allows you to search for a partial word. For example, entering a keyword search of aero* will search for any word beginning with aero.
Using the question mark, ( ? ) allows you to search for a word with a single character wildcard. For example, searching for t?re would match both tire and tyre
Using Quotes
Words in double quotes " " are treated as a phrase. Conducting a search for "heat model" will return all results in which the exact phrase "heat model" is found, while "heat modeling" would NOT be included.
A term combined with a phrase will be joined with an OR operator.
Searching for Standards
When searching for a standard please use the entire Document Number assigned, which includes the abbreviation. A space can be used, or omitted between the abbreviation and number.