This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Hose and Hose Assemblies for Marine Applications
- Ground Vehicle Standard
Published June 06, 2014 by SAE International in United States
Downloadable datasets availableAnnotation ability available
SAE J1942, developed through the cooperative efforts of the U.S. Coast Guard and SAE, became effective August 28, 19911, as the official document for nonmetallic flexible hose assemblies for commercial marine use.
This SAE Standard covers specific requirements for several styles of hose and/or hose assemblies in systems on board commercial vessels inspected and certificated by the U.S. Coast Guard. It is intended that this document establish hose constructions and performance levels that are essential to safe operations in the marine environment. Refer to SAE J1273 for selection, installation, and maintenance of hose and hose assemblies.
Refer to SAE J1527 Marine Fuel Hose for hose to convey gasoline or diesel fuel aboard small craft, including pleasure craft and related small commercial craft regulated directly or by reference under 33 CFR 183 Subpart J, and boats and yachts meeting American Boat and Yacht Council standards.
SAE J1942-1—Qualified Hoses for Marine Applications is a listing of the products which have been certified for use in the applications described in SAE J1942, Table 1—HOSE APPLICATION / CONSTRUCTION, for Fluid Power, Fuel Oil, Lube Oil, Water, and Pneumatic systems.
SAE J1942-1 is updated yearly and is available from SAE as a single copy document.
J1942 has been reaffirmed to comply with the SAE five-year review policy.
|Ground Vehicle Standard||Hose and Hose Assemblies for Marine Applications|
|Aerospace Standard||Degradation Limits of Hydrocarbon-Based Hydraulic Fluids, MIL-PRF-5606, MIL-PRF-83282, and MIL-PRF-87257 Used in Hydraulic Test Stands|
Data Sets - Support Documents
|Unnamed Dataset 1|
|TABLE 1||HOSE APPLICATION/CONSTRUCTION|
|TABLE 2||MINIMUM BURNER WIDTH|
|TABLE 3||REQUIRED WATER TEMPERATURE FOR TEST|
|Unnamed Dataset 5|
|Unnamed Dataset 6|
Hydraulic Hose and Hose Fittings Committee
The Hydraulic Hose and Hose Fittings Subcommittee of the FCCTC develops and maintains SAE Standards, Recommended Practices and Information Reports relating to hydraulic hose and hose fittings with an intended use in pressure applications. Participants in the FCCTC Hydraulic Hose and Hose Fittings Subcommittee include OEMs, suppliers, consulting firms, government and other interested parties.
|ASTMD1141||This document is not part of the subscrption.|
|ISO15541||This document is not part of the subscrption.|
|J1273_201409||Recommended Practices for Hydraulic Hose Assemblies|
|J1475_201406||Hydraulic Hose Fitting for Marine Applications|
|J1527_202201||Marine Fuel Hoses|
|J1942/1_202012||Qualified Hoses for Marine Applications|
|J343_201605||Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies|
|MSHA30CFR18.65||This document is not part of the subscrption.|
* Redlines comparisons are available for those standards listed in the Revision History that contain a radio button. A redline comparison of the current version against a revision is accomplished by selecting the radio button next to the standard and then selecting 'compare'. At this time, Redline versions only exist for some AMS standards. SAE will continue to add redline versioning with ongoing updates to SAE MOBILUS.