This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Marine Fuel Hoses
- Ground Vehicle Standard
- J1527_201102
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This SAE Standard specifies requirements for two types, three classes and four styles of reinforced hose and non-reinforced tubing for conveying gasoline or diesel fuel aboard small craft including pleasure craft whose fuel systems are regulated under 33 CFR 183 Subpart J.
Refer to SAE J1942 Hose and Hose Assemblies for commercial marine nonmetallic flexible hose or hose assemblies used in systems on board commercial vessels inspected and certified by the U.S. Coast Guard.
Refer to SAE J2046 Personal Watercraft Fuel Systems for fuel hose used on Personal Watercraft.
Rationale
Due to tighter permeation standards using aggressive fuels recently implemented by entities such as the California Air Resources Board and the Environmental Protection Agency, Fuel C with 15% methanol is a test fuel that can be omitted from this document. Class 1–15 hose will be tested with Fuel C and Fuel C with 10% ethanol. This document has been modified to remove the fuel aging and permeation specifications regarding methanol testing (85% ASTM Fuel C with 15% Methanol by volume).
Recommended Content
| Ground Vehicle Standard | Test Procedure to Determine the Hydrocarbon Losses from Fuel Tubes, Hoses, Fittings, and Fuel Line Assemblies by Recirculation |
| Ground Vehicle Standard | Small Diameter Fuel Line Permeation Test Procedure |
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| TABLE 1 | DIMENSIONS AND TOLERANCES | |
| TABLE 2 | REQUIREMENTS FOR ASTM FUEL C | |
| TABLE 3 | REQUIREMENTS FOR CE-10 FUEL; 90% ASTM FUEL C AND 10% ASTM D 4806 ETHANOL BY VOLUME |
Issuing Committee
Reference
| Number | Title |
|---|---|
| 33CFR183 | This document is not part of the subscrption. |
| ASTM D 4806 | This document is not part of the subscrption. |
| ASTMD1149 | This document is not part of the subscrption. |
| ASTMD380 | This document is not part of the subscrption. |
| ASTMD413 | This document is not part of the subscrption. |
| ASTMD471 | This document is not part of the subscrption. |
| ASTMD4806-06a | This document is not part of the subscrption. |
| ASTMD573 | This document is not part of the subscrption. |
| ISO7840 | This document is not part of the subscrption. |
| ISO8469 | This document is not part of the subscrption. |
| J1942_201406 | Hose and Hose Assemblies for Marine Applications |
| J2006 | This document is not part of the subscrption. |
| J2006_201302 | Marine Exhaust Hose |
| J2046_202302 | Personal Watercraft Fuel Systems |
| J516_201110 | Hydraulic Hose Fittings |
| J516_201604 | Hydraulic Hose Fittings |
| J517_201302 | Hydraulic Hose |
| J517_201612 | Hydraulic Hose |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.