This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Connectors, Electrical, Bayonet Coupling, Environment Resisting, Umbilical, General Specification For
- Aerospace Standard
Published July 31, 2012 by SAE International in United States
Downloadable datasets availableAnnotation ability available
This specification covers environment-resisting, quick disconnect, EMI/RFI shielded and non-shielded umbilical, electric connectors and adapter assemblies with removable crimp or nonremovable solder-type contacts and accessories. Connectors are rated for operation from −55 °C (−67 °F) to 200 °C (392 °F). Adapter assemblies are rated for operation from −55 °C (−67 °F) to 125 °C (257 °F). The upper temperature is the maximum internal hot spot temperature resulting from any combination of electrical load and ambient temperature.
Revise to incorporate the Qualifying Activity testing as required by SAE policy, to replace MIL-STD-1344 test methods, to update references/document format with current SAE guidelines, and review specification for known technical issues.
|Aerospace Standard||Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting|
|Aerospace Standard||Cable, Electric, Filter Line, Radio Frequency Absorptive|
Data Sets - Support Documents
|Unnamed Dataset 1|
|Unnamed Dataset 2|
|Unnamed Dataset 3|
|Unnamed Dataset 4|
|Unnamed Dataset 5|
|TABLE 1A||ADAPTER ASSEMBLIES - WIRE RANGE ACCOMMODATIONS|
|TABLE 1B||CONNECTORS - WIRE RANGE ACCOMMODATIONS|
|TABLE 2||CONTACT INSERTION AND REMOVAL FORCES|
|TABLE 3||CONTACT ENGAGING AND SEPARATING FORCES (OUNCES)|
|TABLE 4||MATING AND UNMATING FORCES|
|TABLE 5||CONTACT RETENTION WITH AXIAL LOADS|
|TABLE 6||TEMPERATURE EXTREMES|
|TABLE 7||TEST VOLTAGE (AC, RMS)|
|TABLE 8||EMI/RFI SHIELDING EFFECTIVENESS|
|TABLE 10||EXTERNAL BENDING MOMENT|
|TABLE 11||CONTACT RESISTANCE LIMITS|
|TABLE 12||COUPLING RING RETENTION FORCES (MIN)|
|TABLE 13||QUALIFICATION INSPECTION FOR REMOVABLE CONTACT TYPE CONNECTOR|
|TABLE 14||QUALIFICATION INSPECTION FOR NONREMOVABLE CONTACT TYPE CONNECTORS|
|TABLE 15||GROUP B (RETENTION) INSPECTION FOR REMOVABLE CONTACT TYPE CONNECTORS|
|TABLE 16||GROUP B (RETENTION) INSPECTION FOR NONREMOVABLE CONTACT TYPE CONNECTORS|
|TABLE 17||QUALIFICATION INSPECTION FOR CONNECTOR ACCESSORIES AND CRIMP CONTACT RETENTION FEATURE|
|TABLE 18||GROUP B (RETENTION) INSPECTION FOR CONNECTOR ACCESSORIES AND CRIMP CONTACT RETENTION FEATURE|
|TABLE 19||TEST CYLINDER OD SIZES|
|TABLE 20||GROUP A INSPECTION|
|TABLE 21||MAXIMUM RECOMMENDED AC (RMS) WORKING VOLTAGE|
SAE Subcommittee AE-8C1, Connectors, shall be associated with those activities directed by the parent SAE Aerospace Council and the SAE Aerospace Electronics and Electrical Distribution Systems Committee, for the development and application of electrical optical connector and associated hardware standards and specifications. SAE Subcommittee shall also serve the needs of the Navy, Army, and Air Force through the establishment and maintenance of User Advisory Committees.
* Redlines comparisons are available for those standards listed in the Revision History that contain a radio button. A redline comparison of the current version against a revision is accomplished by selecting the radio button next to the standard and then selecting 'compare'. At this time, Redline versions only exist for some AMS standards. SAE will continue to add redline versioning with ongoing updates to SAE MOBILUS.