This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN
- Aerospace Standard
- AS3659A
- Revised
Downloadable datasets available
This content contains a 2D/3D
configurator
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Rationale
FIGURE 1 REDRAWN, DELETE RADIUS AT TRANSITION OF WRENCH PAD AND BASE FLANGE, REVISE LEAD THREAD CHAMFER (ADD DIM AK), ADD TERTIARY DATUM TO POSITION REQUIREMENT FOR DRILLED HOLES, REVISE MATERIAL CALLOUT (NOTE 2), ADD NEW NOTE FOR DISPOSITION OF EXISTING INVENTORY, CORRECT TYPOGRAPHICAL ERRORS IN M MAX DIMENSIONS FOR AS3659-4-05, AS3659-4-31 & AS3659-16-18, CORRECT TYPOGRAPHICAL ERROR IN L MAX DIMENSION FOR P/N AS3659-5-38, UPDATE REFERENCES AND GENERAL EDITORIAL UPDATES THROUGHOUT.
2D/3D Drawings
Some older browsers could require a plugin
install for 3D and or 2D previewer.
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| TABLE 1A | DASH NUMBERS AND DIMENSIONS B - F | |
| TABLE 1B | DASH NUMBERS AND DIMENSIONS G - V | |
| TABLE 1C | DASH NUMBERS, DIMENSIONS AB, AH, AJ, AK, AND TOLERANCES AC, AD, AE, & AG | |
| TABLE 2 | PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .1900 NOMINAL DIAMETER BOLTS | |
| TABLE 3 | PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .2500 NOMINAL DIAMETER BOLTS | |
| TABLE 4 | PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .3125 NOMINAL DIAMETER BOLTS | |
| TABLE 5 | PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .3750 NOMINAL DIAMETER BOLTS | |
| TABLE 6 | PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .4375 NOMINAL DIAMETER BOLTS | |
| TABLE 7 | PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .5000 NOMINAL DIAMETER BOLTS | |
| TABLE 8 | PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .5625 NOMINAL DIAMETER BOLTS | |
| TABLE 9 | PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .6250 NOMINAL DIAMETER BOLTS | |
| TABLE 10 | PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .7500 NOMINAL DIAMETER BOLTS | |
| TABLE 11 | PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .8750 NOMINAL DIAMETER BOLTS | |
| TABLE 12 | PART NUMBER AND SHANK LENGTH DIMENSIONS FOR 1.0000 NOMINAL DIAMETER BOLTS |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.