This content is not included in your SAE MOBILUS subscription, or you are not logged in.
BEARING, BALL, ROD END, DOUBLE ROW, PRECISION, SOLID SHANK, SELF-ALIGNING, AIRFRAME, TYPE I, -65° TO 300 °F
- Aerospace Standard
Published October 20, 2008 by SAE International in United States
Downloadable datasets availableAnnotation ability available
AS21150 REV D IS A FIVE YEAR REVIEW. UPDATED SPECIFICATIONS TO CURRENT REQUIREMENTS, REFORMATTED GRAPHICS, TABLES AND NOTES, ADDED ZINC-NICKEL CODE, ADDED OPTIONAL MATERIAL FOR INNER RACE AND BALLS AND REMOVED “OR AN APPROVED EQUIVALENT” TO SEAL MATERIAL
|Aerospace Standard||BEARING, ROLLER, NEEDLE, TRACK ROLLER, SEALED, TYPE X, ANTIFRICTION, INCH|
|Aerospace Standard||BEARING, BALL, AIRFRAME, EXTRA LIGHT DUTY|
Data Sets - Support Documents
|TABLE 1||DIMENSIONS AND TOLERANCES|
|TABLE 2||ENGINEERING DATA|
ACBG Rolling Element Bearing Committee
The objective of the Airframe Control Bearing Group (ACBG)is to provide industry experience and state of the art technology for airframe bearings, and issue as appropriate, published documents known as SAE Aerospace Standards. The focus of the Committees is present and future aircraft airframe control systems, bearings, and associated components.The ACBG shall be responsible for the preparation, development, maintenance and promotion of all relevant specifications, standards, and requirements for airframe bearings, control system components, and associated hardware used in the design and construction of aerospace mechanical systems and subsystems. The ACBG shall also coordinate with other organizations for lubricants, control cables, and locking devices and shall utilize and promote the use of specifications published by those organizations. The ACBG shall function as a forum for technology transfer as it affects the Airframe bearing and control systems industry and for the enhancement of distribution channels.
|AMS-QQ-P-416||This document is not part of the subscrption.|
|AMS2417||NICKEL-ZINC ALLOY PLATING|
|AMS3666||POLYTETRAFLUOROETHYLENE SHEET, GLASS FABRIC REINFORCED|
|AMS6274||STEEL .5 Ni .5 Cr .2 Mo (.18 - .23 C)|
|AMS6444||STEEL, PREMIUM BEARING QUALITY 1.45Cr (0.95 - 1.10C) (SAE 52100) Consumable Electrode Vacuum Melted|
|AMSQQP416||Plating, Cadmium (Electrodeposited)|
|ASTMD4550||This document is not part of the subscrption.|
|ASTMF2215||This document is not part of the subscrption.|
|MIL-PRF-23827||This document is not part of the subscrption.|
|MIL-PRF-81322||This document is not part of the subscrption.|
* Redlines comparisons are available for those standards listed in the Revision History that contain a radio button. A redline comparison of the current version against a revision is accomplished by selecting the radio button next to the standard and then selecting 'compare'. At this time, Redline versions only exist for some AMS standards. SAE will continue to add redline versioning with ongoing updates to SAE MOBILUS.